ROLANDROCKSHOP
I wanna be Dave
are they back instock yet??
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Vanquish Products SLW
- Thread starter Vp Monkey
- Start date
Pretty much have everything in stock atm, minus the few that went to plating.
jcboof
I wanna be Dave
Anyone happen to know the outside edge to outside edge measurement of the SLWs w/.225 offset on a berg with SEDONAS??
mustangboy_347
Rock Crawler
i run the SLW V3 .700 w/225 spacer on my sons truck it measures 10 5/8 from lug to lug...and on my rig i run the SLW V1 NT .500 w/225 spacer and it measures 9 3/4 lug to lug....hope this helps "thumbsup"
jcboof
I wanna be Dave
Thanks Jeff!! Thats what I wondered!"thumbsup"
mustangboy_347
Rock Crawler
no problem ..."thumbsup"..plus you can always run different hex nuts also...
xrra_tj
Rock Crawler
Will the V3 ever be avalible in 1.35 width?
tom@vp
RCC Addict
at this time, no... just not enough demand.
mustangboy_347
Rock Crawler
tom@vp
RCC Addict
xrra_tj
Rock Crawler
guess I'll have to get V1 then. Unless theres any plan to do 1.35 anytime soom
bit of an odd question, but how does a set of 1.0" SLW V1s with the 225 hubs match up in terms of backspacing compared to say, a set of tamiya dish-star 4WD buggy fronts? I've got a dirt oval bomber I'm building based on an old Bandit, using a Parma '41 Willys body, and I'm trying to come as close to tucking the tires as I can within the confines of the Bandit chassis, and finding narrow (1" wide), 12mm hex mount 2.2s with negative offset isn't exactly easy and so far, other than said dish-stars (which don't really look that good at all) and HB D4/HPI Cyber10B fronts and MAYBE Duratrax Maximum BX fronts (can't find a good measurement on the front hexes of those), these are my best bet and certainly look the best, especially if I could get the rings in flat finish and either black or crimson hardware to match the planned flat black w/ gloss black accents paintscheme. any help is much abliged, and if at all possible I'll be rockin some SLW V1s in the clay roundyround by the end of the year "thumbsup"
Last edited:
richardgarrett56
Rock Crawler
im not good enuff
spent a crap load on vanquish wheels dh p comps slw offset hubs and bullet weights from( ckrc ) and not one sticker
...this is the last time i buy from ckrc:evil:
spent a crap load on vanquish wheels dh p comps slw offset hubs and bullet weights from( ckrc ) and not one sticker
...this is the last time i buy from ckrc:evil:
Last edited:
HEAVY METAL
Rock Stacker
do you have plans for centre caps for the slw v1?
Trugg
Rock Crawler
Any plans to offer the SLW beadlock rings in your "Bronze" color?
....I know there probably isnt much demand for this color... but i think it is the COOLEST color rings you have:ror:8)
Please make them in "Bronze" for me:mrgreen:
....I know there probably isnt much demand for this color... but i think it is the COOLEST color rings you have:ror:8)
Please make them in "Bronze" for me:mrgreen:
Last edited:
Weasel
Rock Stacker
I got my wheels in, very impressed. Had one that wasn't fully drilled and had to send it back but VP sent out a new one right away.
I see the bolts are metric :sad: (only thing on my Losi that is) but what size are thread pitch are they? I need some replacement as one has already stripped out
I see the bolts are metric :sad: (only thing on my Losi that is) but what size are thread pitch are they? I need some replacement as one has already stripped out
tom@vp
RCC Addict
I got my wheels in, very impressed. Had one that wasn't fully drilled and had to send it back but VP sent out a new one right away.
I see the bolts are metric :sad: (only thing on my Losi that is) but what size are thread pitch are they? I need some replacement as one has already stripped out
Yea sorry about that wheel. that actually does not happen very much at all. but as far as stripping, id have to say it that is very weird, i can say i've had one call on that in 3 years. i don't recommend using power tools and deadlock screws do not have to be wrenched down hard, just seated untill the beadlock hits the wheel and snug from there.
here is the parts list
http://www.vanquishproducts.com/slw-description.html
24EA. M3x6 SST BHCS
