Vanquish Products SLW

[constantmotion]

You have this listed

Berg
350 = 9.750, 475 = 9.875, 600 = 10.00, 725 = 10.12 (I know these are the track width measurements with the corresponding hub.)

Then you have these measurements........I know that you offer 2 different wheel widths 1" and 1.35", but what are the measurements of?
1.000 wheel to wheel Inside measurement = 7.76
1.350 wheel to wheel Inside measurement = 7.06

 

[tom@vp]

You have this listed

Berg
350 = 9.750, 475 = 9.875, 600 = 10.00, 725 = 10.12 (I know these are the track width measurements with the corresponding hub.)

Then you have these measurements........I know that you offer 2 different wheel widths 1" and 1.35", but what are the measurements of?
1.000 wheel to wheel Inside measurement = 7.76
1.350 wheel to wheel Inside measurement = 7.06

The outside track width does not change if you run the 1.0 or the 1.3 with any of the hubs for example the 350's. but the clearance inside the wheel does. that is the number you are seeing. no one ever lists this information. i did

 

[ROCKCAD]

I THOUGHT I HEARD OF A NARROWER HUB BEING MADE FOR BERG TRACK WIDTH AROUND 9-9/16"......TRUE OR FALSE ???..THANKS VP :shock:

The outside track width does not change if you run the 1.0 or the 1.3 with any of the hubs for example the 350's. but the clearance inside the wheel does. that is the number you are seeing. no one ever lists this information. i did

 

[tom@vp]

I THOUGHT I HEARD OF A NARROWER HUB BEING MADE FOR BERG TRACK WIDTH AROUND 9-9/16"......TRUE OR FALSE ???..THANKS VP :shock:

Yes we are making a 225 as well, with takes another 1/4 inch off the total width.

 

[constantmotion]

The outside track width does not change if you run the 1.0 or the 1.3 with any of the hubs for example the 350's. but the clearance inside the wheel does. that is the number you are seeing. no one ever lists this information. i did

Gotcha

 

[ROCKCAD]

NICE, I TAKE IT THAT WILL CLEAR YOUR VP HC KNUCKLES USED UP FRONT ?...WHEN WILL THESE BE READY FOR SALE ? THANKS AGAIN. CAN'T WAIT TO CHECK THEM OUT "thumbsup":mrgreen:

Yes we are making a 225 as well, with takes another 1/4 inch off the total width.

 

[constantmotion]

Do you know which hubs are the narrowest that you can run on the Losi Comp Crawler up front? I know the rear doesn't matter.

 

[Fishmaxx]

The website says "usually ships the same business day", but I have not received any notice or tracking #. Its been a few days, and I am just wondering because seems like I read somewhere it was 5-7 days before they were ready to ship.

I am not worried about getting my wheels...just curious more than anything"thumbsup"

 

[tom@vp]

All SLW orders will be shipping in next 1 to 2 days, we are just finishing up the hubs, here is a quick snap of a 1.0 wide with the 225 wide hub.

 

[constantmotion]

The black looks awesome

 

[roksloski]

All SLW orders will be shipping in next 1 to 2 days, we are just finishing up the hubs, here is a quick snap of a 1.0 wide with the 225 wide hub.

those are freakin awsome...."thumbsup""thumbsup"

now i got to get the drool off my key board........

gray with silver rings and black screws would be nice....

 

[tom@vp]

those are freakin awsome...."thumbsup""thumbsup"

now i got to get the drool off my key board........

gray with silver rings and black screws would be nice....

sure its drool ?:shock:

 

[ROCKCAD]

looks great tom. think you could post up a pics of wheel on a front berg axle (with vp knuckles) with the 225 hubs and measure tape. "thumbsup"8):mrgreen:

 

[tom@vp]

i was pleased to see they are a bit more narrow than expected.

http://site.vanquishproducts.com/vp-pics/SLW/pictures006.jpg
http://site.vanquishproducts.com/vp-pics/SLW/pictures007.jpg
http://site.vanquishproducts.com/vp-pics/SLW/pictures008.jpg

 

[DiEzel]

What's the wieght of that wheel combo ?

 

[tom@vp]

What's the wieght of that wheel combo ?

1.9 oz 1.0 wide, 225 hubs..

 

[Chris_The_Battery_Man]

I just orderes me a set today. Cant wait to get em'! and the MOA chassi!!!

 

[BILLYGOAT]

tom , these are awesome. great work dude. these are going on my next rig for sure.

 

[wrightcs77]

Will the DH Pro hub spacers work with these?

I have a set coming to run in the back and the DH Pro's in the front. Can't wait to try them.

 

[tom@vp]

Will the DH Pro hub spacers work with these?

I have a set coming to run in the back and the DH Pro's in the front. Can't wait to try them.

they would not work correctly, but i think they would bolt up.