Harley's Axial Wraith Build - Jimmy's 4x4 Ultra 4 KOH Style

[ev0l]

Your day was more productive than mine. My personal opinion is that as good as the interior looks I'd run a matching door panel. If front and rear fender areas were tube I'd say leave the doors just tube. But with the current setup a matching panel would look better. My 2 cents What axles did you end up going with?

edit:
Oh duh. I was like #1 #2 whaaaat?? OHHHHHH

I like #1 "thumbsup"

 

[metallocide]

Re: Harley's Wraith - Jimmy's 4x4 Ultra4

I like #4 the best out of 4 given choices. "thumbsup"

 

[desertmaxx]

Re: Harley's Wraith - Jimmy's 4x4 Ultra4

#1. now just do it and finish it already."thumbsup"

 

[crwlnCreeper]

Re: Harley's Wraith - Jimmy's 4x4 Ultra4

I have no intentions of modifying the cage at this point. That is one reason I like the clear door option as it won't look odd.

If you're going for "1:1 realism", you could do a solid lexan door on the driver's side, and a clear lexan door for the passenger side. While this might be more of a W.E. Rock look than Ultra4, it would be a cool way to show off the interior."thumbsup"

 

[Harley]

If you're going for "1:1 realism", you could do a solid lexan door on the driver's side, and a clear lexan door for the passenger side. While this might be more of a W.E. Rock look than Ultra4, it would be a cool way to show off the interior."thumbsup"

Yup that's what I was saying here.

I just like the doors off look, although I would still do a Lexan door.

 

[Harley]

Re: Harley's Wraith - Jimmy's 4x4 Ultra4

Your day was more productive than mine. My personal opinion is that as good as the interior looks I'd run a matching door panel. If front and rear fender areas were tube I'd say leave the doors just tube. But with the current setup a matching panel would look better. My 2 cents What axles did you end up going with?

edit:
Oh duh. I was like #1 #2 whaaaat?? OHHHHHH

I like #1 "thumbsup"

I'm going to go with the silver housings I think. I'm trying to stop thinking about it and just go with it!

 

[Harley]

Re: Harley's Wraith - Jimmy's 4x4 Ultra4

Alright, trying to keep track of all the details I need to wrap up. Just placed my order for some 5mm LED's to do the rear light bar. I spent $14 at Radio shack yesterday for 5 LED's :roll: and they were painfully dim. So being in a rush didn't do anything but waste my time.

Ordered some bright pieces through ebay and now I just get to wait on the slow boat... :ror:

100pcs 5mm LED Ultra Bright Light Bulb Lamp 150000MCD | eBay

 

[CarterFab]

Nice find. I did the exact same thing and was sorely disappointed with their light output. Placed me an order as well.


Clear Eyes, Full Hearts, Can't Lose

 

[joelKID984]

Re: Harley's Wraith - Jimmy's 4x4 Ultra4

damn, the detail you are putting in this this is crazy!!!

 

[BurnLatex]

Re: Harley's Wraith - Jimmy's 4x4 Ultra4

100 lights for $3 ?!? That is a sweet deal! I hope its not a "you get what you pay for" thing.

 

[Harley]

Re: Harley's Wraith - Jimmy's 4x4 Ultra4

100 lights for $3 ?!? That is a sweet deal! I hope its not a "you get what you pay for" thing.

I've probably bought 1000 LED's from them over the years, never been disappointed. I have a HUGE box of LED's and resistors down in the shop, however none of them were 5mm. :roll:

 

[Harley]

Re: Harley's Wraith - Jimmy's 4x4 Ultra4

Well in hopes of completing a bombproof drivetrain, I'm starting at the top and will continue to work down.

The stock Axial slipper often seems like an all or nothing type deal. You either crank it down to the point where it never slips or it always slips when you don't want it to.

So I was aware of the new top shaft made by SuperShafty.com that will allow you to run the steel Robinson 32p spur and heavy duty Traxxas slipper from the Slash 4x4. He is out of stock currently but I went ahead and got the rest of the parts on the way for the setup. I decided to drop down in pinion size to a 13t so that will lower my gear ratio just a hair.


Here is his thread: http://www.rccrawler.com/forum/axle...of-wraith-ax10-transmission-ultimate-mod.html

 

[Farmer]

Re: Harley's Wraith - Jimmy's 4x4 Ultra4

2wd slash slipper not 4x4, just so you know. Plus the stock gear cover will still fit"thumbsup"

Later,
Farmer

 

[Harley]

2wd slash slipper not 4x4, just so you know. Plus the stock gear cover will still fit"thumbsup"

Later,
Farmer

Ahhh, good call. I thought the Robinson page said 4x4. Looking forward to beefing it up!

 

[meffie]

So do you think this is a required upgrade, or is it just because your weight and abuse level?

 

[Harley]

So do you think this is a required upgrade, or is it just because your weight and abuse level?

I see it as a good idea because of the weight and amount of power I plan on using. I do think most people would benefit from changing out the stock bearings to some new higher quality bearings though.

 

[meffie]

I see it as a good idea because of the weight and amount of power I plan on using. I do think most people would benefit from changing out the stock bearings to some new higher quality bearings though.

If xr bearings were a tell tale sign of axial bearings....lol

 

[Harley]

Re: Harley's Wraith - Jimmy's 4x4 Ultra4

Holmes Hobbies delivery!

 

[chicklet]

Re: Harley's Wraith - Jimmy's 4x4 Ultra4

Holmes Hobbies delivery!

Mmmmmmm tats sexy :twisted:

 

[The Doc]

Re: Harley's Wraith - Jimmy's 4x4 Ultra4

I just installed The 3300/mmp and so far I like it, I havent crawled yet but we''l' have to see on that one. On the pics of your doors Do a shot of full doors, I know you don't like them but It might look better than the pics you have up, just my $.02 The thing looks rad but if your going for a KOH look everyone runs full doors. Someone said clear doors and That would look pretty cool with some stickers on them so you can tell theres something there.