GySgt Hartman
I wanna be Dave
Please post some pics!
I'd love to see the internals and how the 10/22 integrates with the stock.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Gun and knife picture thread!
- Thread starter chip cross
- Start date
Please post some pics!
I'd love to see the internals and how the 10/22 integrates with the stock.
Dostradamas
RCC Addict
It does look very cool, but it will jam with cheap ammo as any 10/22 will.
I just picked up one of these for a song & it will cycle any .22 round I can slide down the tube (short, long, & long rifle.)
GySgt Hartman
I wanna be Dave
Never mind, found it.
<iframe src="//www.youtube.com/embed/Vh_3FSpztD8" allowfullscreen="" frameborder="0" height="315" width="560"></iframe>
<iframe src="//www.youtube.com/embed/nVyJbH6wloc" allowfullscreen="" frameborder="0" height="315" width="560"></iframe>
Indetrucks
Newbie
I have not had a single missfire with my HTA bullpup.
this is mine with some custom barrel work
this is mine with some custom barrel work
Lukescb7
Rock Crawler
Sweet ruger conversion."thumbsup" Any pics on how the mag feeds from the top?
Edit-Just checked out the website and saw its just a dummy mag/ammo holder.
Recently picked up a new EDC, few hundred rounds(FMJ and JHP) through it flawlessly. No hiccups of any kind, recoils not bad, and breaks down real easy. Cant complain at all, especially for picking it up for $200"thumbsup"
Edit-Just checked out the website and saw its just a dummy mag/ammo holder.
Recently picked up a new EDC, few hundred rounds(FMJ and JHP) through it flawlessly. No hiccups of any kind, recoils not bad, and breaks down real easy. Cant complain at all, especially for picking it up for $200"thumbsup"
Last edited:
GySgt Hartman
I wanna be Dave
That's not a mag, it's "ammo storage". The mag sticks out the bottom of the stock below the receiver.
Peaker
Rock Crawler
I wish i could tag or do somthing to this tread so it dont pop up in the top every time some one add somthing to it.
I plunge into severe depression every time i realize what i miss out on
I plunge into severe depression every time i realize what i miss out on
dezfan
I wanna be Dave
Those evil little .22s!
Indetrucks
Newbie
idahorock
Rock Stacker
Here is a knife I made last week.The Damascus blade came from a forge in Idaho,the handle is stabilized Myrtle burl.
Last edited:
JeepinDoug
RCC Addict
hpiguy
Rock Crawler
Just out of curiosity, why do you run the AFG so far back?
JeepinDoug
RCC Addict
I moved it back to make room for the light and just haven't adjusted it forward yet. The light mount sucks for the AFG mounting.
hpiguy
Rock Crawler
Gotcha, check out the Viking Tactics VTAC light mount. Solid as hell, mounts up and out of your way without hanging way off the side, and reasonably priced. "thumbsup"
JeepinDoug
RCC Addict
I have a very small collection of tactical blades.
This is my favorite even though it is a clone.
I must say, this clone is amazingly perfect as a clone, as well as the packaging and owner's manual.
This is my favorite even though it is a clone.
I must say, this clone is amazingly perfect as a clone, as well as the packaging and owner's manual.
winnerone23
I wanna be Dave
A little somethin the wife got me for Christmas..
Dragon fly 2
I told her it was a can of worms she didn't want to open! I have always liked spyderco knives, but never wanted to start a collection of them.. $$$..
For a dozen yrs or so I have been in love with the Civilian..
Well, since she opened the can....
I got one of the newer, not Civilian, similar models. Almost a 3rd the price..
Matriarch 2
Main diff is the "plastic" handle instead of G10..
Anywho.. a friend stops by a couple days ago and says, "i got something for you" "i can't keep it in my house"..
He hands me a clone..
It isn't the 20$ knock off but it isn't the 140$ one either. Prolly the 80$ knock off.. oh well, any which way, it was Free to me!
Dragon fly 2
I told her it was a can of worms she didn't want to open! I have always liked spyderco knives, but never wanted to start a collection of them.. $$$..
For a dozen yrs or so I have been in love with the Civilian..
Well, since she opened the can....
I got one of the newer, not Civilian, similar models. Almost a 3rd the price..
Matriarch 2
Main diff is the "plastic" handle instead of G10..
Anywho.. a friend stops by a couple days ago and says, "i got something for you" "i can't keep it in my house"..
He hands me a clone..
It isn't the 20$ knock off but it isn't the 140$ one either. Prolly the 80$ knock off.. oh well, any which way, it was Free to me!
hpiguy
Rock Crawler
Nice blades guys, I like knives also. I'll have to get some pics of some more.
Gerber mini covert auto
Gerber mini covert auto
winnerone23
I wanna be Dave
I have the mini covert(the good one, before the faasst came out). It was a fathers day present.. just haven't found the auto at the right price... Yet..
hpiguy
Rock Crawler
Troy, I think I got that one for right around $100. I want a microtech next.
GySgt Hartman
I wanna be Dave
Pro-Tech Damascus blade flipper (safe queen). First purchase on eBay back in '99, I saw this and registered just to buy it.
Great story about these two. I bought the tritium Kestrel at a local gun show sometime around '02-'03. I was so stoked finding a tritum version I didn't notice the paper sleeve on the box was for another knife. Fast forward 5 or so years, at another local gun show the same vendor had another Kestrel. Well hell it would look great with the other, so I bought it. As he was searching for the box in a pile of boxes, I was told him the story of the other knife with the mismatched sleeve. Low and behold he surfaces with the box for the tritium Kestrel, WIN!
My wife gave me this damascus/white linen UTX70 DE for x-mas a few years ago.
