• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Ottsix TKO10

Shinjari said:
There are several methods. If you have fancy beadlocks with adjustable offsets, just put on some wider hubs. You can do the wide setup at the rear and some vendors make the correct width axle shafts as well.

I have only done the narrow mod so the track width is ~1/4" wider at each end due to the wraith/xr10 chub/knuckle being wider than the scx10 setup, so I just offset with some hubs, or even just a wider hex at the rear. "thumbsup"
Click to expand...
Do you know who makes wider axle shafts? It stands to reason that if unmodified xr10 shafts fit the front then xr10 rear shafts should work as well but that is me simply speculating.

Sent from my SM-T320 using Tapatalk
 
XR10 rear shafts are different lengths so it doesn't work that easy =/

I'd have to dig but I recall a vendor or two offering these straight axles with the proper width. Like beef tubes offers modified xr10 universals but not the rear.
 
Shinjari said:
XR10 rear shafts are different lengths so it doesn't work that easy =/

I'd have to dig but I recall a vendor or two offering these straight axles with the proper width. Like beef tubes offers modified xr10 universals but not the rear.
Click to expand...



I found that out. Dan from beef tubes said vanquish xr length for curries are an exact fit but according to the vanquish site they are no longer in production. I thought about trying the ssd wide ones they use for there splined tube. I want to do the wide version because I'm using the axles on a 1.9 wraith build and would like the extra width.


Sent from my iPhone using Tapatalk
 
Does anybody have a list of the bearing sizes needed to complete the axles. I'm building from the ground up but don't need bearings for the rest of my vehicle


Sent from my iPhone using Tapatalk
 
dpcardoza said:
I found that out. Dan from beef tubes said vanquish xr length for curries are an exact fit but according to the vanquish site they are no longer in production. I thought about trying the ssd wide ones they use for there splined tube. I want to do the wide version because I'm using the axles on a 1.9 wraith build and would like the extra width.


Sent from my iPhone using Tapatalk
Click to expand...



For future reference. The ssd wide rear shafts work with the wide splined beef tubes.


Sent from my iPhone using Tapatalk
 
Noticed on a online retailer that ottsix/tko sells their own upper links for the tko housing for a 12" wb.. Will i have issues with these just using my vanquish set?
 
Just got a set of these axles version 1 apparently. Ordered beef tubes for them as well, does anyone know if the tubes will fit version 2?
 
Has anybody came out with an axle specific panhard mount or are we still modding a vp mount.


Sent from my iPhone using Tapatalk
 
You can fit the vp mount with very little trimming on the axle housing and none on the vp part.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.

Similar threads

C
AX10 Scorpion RTR turned NMRCC Trail Class Build
2 3
Replies
46
Views
759
Chingon
C
Jfrisch1
Diving into an optic
3 4 5
Replies
81
Views
3K
Jfrisch1
Jfrisch1
R
Rear upper links positions
Replies
5
Views
729
Reezo
R
Thloftus
Thloftus’ Gravity Well H10 Optic kit
2 3
Replies
51
Views
2K
Thloftus
Thloftus
JatoTheRipper
Jato Gets Offerings to Build the Teal Terrifier H10 Optic
5 6 7
Replies
120
Views
6K
B-MOW71
B-MOW71
Back
Top