• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Yeti Jr. upgrades

Never mind, I used my brain and read the manual:flipoff: and it charges for like two hours, I see what u mean now, they take fooooorrrreeevvveeerrr
 
Never mind, I used my brain and read the manual:flipoff: and it charges for like two hours, I see what u mean now, they take fooooorrrreeevvveeerrr
Yeah it's something like a 200mA charger

The stock battery is a 1200mAh I think so you could charge at least at 1A.

Sent from my Pixel 2 XL using Tapatalk
 
I’ll look into the gear mesh, the backlash might be tight, if not I have a bookmark for the fast eddy bearings or the stock rear bearings part number
 
Well the new plastic diff cups and spider gears lasted for one 2s pack.
My 4y son did a single 12inch jump and I heard the dreaded clicking again...

I will try the new axial aluminium locker in the front.
We'll see in 2 weeks (Amain shipping to the lost far away lands of Canada...)

Sent from my Pixel 2 XL using Tapatalk
 
Also has anyone thought about traxxas tracks, traxx on this for snow?
Pretty sure it's too big.
Like fitting 1.9 wheels on the yeti Jr.

I put 1.55 MT/R tires that are about 1/2inch taller than stock and it's almost too big.

Sent from my Pixel 2 XL using Tapatalk
 
I just think it would look cool, and it would have good flotation. If anyone on here has the traxxas traxx could u put them on and take pics, I would be very interested. Also Someone needs to make 1.55 tracks
 
Last edited:
Just a little bigger than stock.
f428a3d6f9af1da818cb488ce801bcdd.jpg
0e5836f632be2a78f5dd09e46d742408.jpg


Sent from my Nexus 6 using Tapatalk

Is that a sticker on the rear axle or is it paint, if it is a sticker tell me where u got it
 
For those having doubts on how far you can push upgrades on the Yeti Jr.

Full metal drivetrain (Steel rear axle shafts, rear locker, driveshafts, Steel front CVDs)

Aluminium upper arms, trailing arms, front arms with c-hubs and knuckles, Steering rack, steering links and rear shocks.

Hobbywing 1060 esc
Full size Low profile servo (Solar D770)
Tactic Tr325 rx
Stock motor
Zippy 2s batteries 2200 mah

TX03 FPV camera

It's missing new tires and wheels but this is where options are limited.
b4d1fe8df5cc96fd7fc1f819147783f5.jpg
6e096ba848714f8dc51c2ea27ec3f4da.jpg
82070e1ec4e6f9dffa42fe4935996189.jpg
37b7ab7c40fbe84ccb7add1192ca0d2d.jpg
a5a2feda61afb89d64ac32bd404c8756.jpg


Sent from my Nexus 6 using Tapatalk

Same here on the first pics
 
I used a silver sharpie pen and painted lots of markings in the Jr.

I even did the nuts on the plastic wheels before moving on to the aluminum beadlocks

Sent from my Pixel 2 XL using Tapatalk
 
I guess I’m posting a whole lot today😐, has everyone else had the problem where it never went straight when stock it always went to one side or the other. What did everyone do to fix that??
 
I guess I’m posting a whole lot today[emoji52], has everyone else had the problem where it never went straight when stock it always went to one side or the other. What did everyone do to fix that??
I tried the GPM front shocks but they have shorter travel and suck

Use the stock front shocks but stuff the rear Springs on them

Sent from my Pixel 2 XL using Tapatalk
 
Back
Top