TURTLE
Gettin’ back on the horse
Thanks man! But its not luck, its hard work and determination. This track and all our tracks were hand built with shovels and buckets. "thumbsup"
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Turtle's Modified XV-01
- Thread starter TURTLE
- Start date
Thanks man! But its not luck, its hard work and determination. This track and all our tracks were hand built with shovels and buckets. "thumbsup"
alexchen86
I wanna be Dave
Yup nature will always find a way...and yeah that was a Jurassic Park rip lol. Lucky for one of our monstrous ovals for 1/5 off road all we do is take a 3/4 ton Ford and just drive in circles until its all flat lol. After its watered down of course.....go redneck engineering! And the barriers are old trailer tires from mobile homes lol.
The back is an ATV track....pretty nice layout.
The back is an ATV track....pretty nice layout.
bvrc
Rock Crawler
turtle; have you put lights in the DS3 yet?
TURTLE
Gettin’ back on the horse
Nope and I am not going too. I have the body from last season all wired up though. I don't have it in me to put holes in the DS3. Maybe next time.
alexchen86
I wanna be Dave
Ty,
Are you using any sort of interior protection on the insides of these lexan shells? I know Tamiya shells are very thick as compared to your typical HPI or Axial...I always reinforce maybe a little too much.
I get all the body posts with foam and shoe goo, then duct tape all pillars, roof, all doors, hood, trunk, wheel wells, basically the entire inside LOL. Downside is the body is even more top heavy as if rally cars aren't top heavy enough. On dirt it's manageable but on concrete prepare for countless barrel rolls if you turn a bit too sharp.
Can we see an inside shot of your reinforcements?
Are you using any sort of interior protection on the insides of these lexan shells? I know Tamiya shells are very thick as compared to your typical HPI or Axial...I always reinforce maybe a little too much.
I get all the body posts with foam and shoe goo, then duct tape all pillars, roof, all doors, hood, trunk, wheel wells, basically the entire inside LOL. Downside is the body is even more top heavy as if rally cars aren't top heavy enough. On dirt it's manageable but on concrete prepare for countless barrel rolls if you turn a bit too sharp.
Can we see an inside shot of your reinforcements?
TURTLE
Gettin’ back on the horse
I don't reinforce the bodies, so no photos necessary. :ror: I run old bodies to practice and run one body for races only. After I race a season on a body it becomes a practice body. I have something like 15 rally car bodies so reinforcing them has never been much of a concern. Plus as you said they become top heavy with reinforcement added. I can't say its top heavy at all with a standard body.
If I rip or break a race body I just add some Shoe Goo to the inside to help it stay together for the rest of the season.
If I rip or break a race body I just add some Shoe Goo to the inside to help it stay together for the rest of the season.
I have reinforced a few bodies with different ways. shoe glue, drywall tape & shoe glue, duct tape and plastidip spray. I found that reinforcing the front up just past the body post holes and all the way adound the lower edges with drywall tape and shoe glue works great. this is where most of the damage occurs. unless you spend a lot of time upside down, reinforcing the top only makes it top heavy. here is me latest atempt at a light weight reinforcement in an 8th scale body. drywall tape & shoe goop in the front and 3 layers plastidip spray around the lower edge. it seem to be holding up pretty good
TURTLE
Gettin’ back on the horse
Alright so I got an onboard alarm a little while ago. It was around 3.00 and I ordered it when I got some new batteries.
The beep is really loud, it gives individual cell voltage and overall voltage too. But I forgot one thing. I need a a balance plug extension. So that will be on the next order.
As far as batteries. After using my 3800mah 2 cell packs since 2009 they are finally starting to die. So I picked a couple of these up.
The beep is really loud, it gives individual cell voltage and overall voltage too. But I forgot one thing. I need a a balance plug extension. So that will be on the next order.
As far as batteries. After using my 3800mah 2 cell packs since 2009 they are finally starting to die. So I picked a couple of these up.
Sith Lord
Quarry Creeper
Why? Doesn't your esc have lipo cut off? Or is it so it alarms BEFORE you get to the cut off?
TURTLE
Gettin’ back on the horse
My ESC does have a lipo cut off, but I don't want to have it hit the cut off while racing. To monitor how much life I can get out of my batteries I got this. So batteries won't die during a race and I won't be changing batteries out too frequently.
Sith Lord
Quarry Creeper
Fair enough.
We've actually got a 6hour Enduro (not rally) coming up where a lipo cut off will come in handy, so you know when to pit while hopefully still under full power.
We've actually got a 6hour Enduro (not rally) coming up where a lipo cut off will come in handy, so you know when to pit while hopefully still under full power.
bvrc
Rock Crawler
This sounds awesome. What are the details? Is there a thread somewhere?
Sith Lord
Quarry Creeper
No real thread yet, other than the entry list. Basically, on road touring cars, 17.5t blinky, maximum 2 sets of tyres, one motor, one chassis, 6hrs race time. 4 drivers per team. Penalties for change of chassis/motor. Driver must change at each battery change. Gonna need a few batteries.... Should be good fun. 20sec lap times = about 1080 laps!
micro racer
Rock Crawler
What shocks are you using? You said you would upgrade to 3.5"-4" shocks at the beginning of the thread, but I didn't really see anything come from that. I probably just missed it, but would you mind clarifying what you are using?
TURTLE
Gettin’ back on the horse
Post number 35 shows the shocks I changed out too. The rear shocks are from the front of a Tamiya 12th scale truck called the Titan (DT-02 I believe). The front shocks are from a Tamiya TB-01 with Losi white springs. I have been meaning to upgrade to some aluminum threaded body shocks, but have been a little lazy with my research due to these working really well.
TURTLE
Gettin’ back on the horse
Still love this car!
That is all. :mrgreen:
That is all. :mrgreen:
bvrc
Rock Crawler
where did you get your personal driver decals? I need some K. Hine ones.
TURTLE
Gettin’ back on the horse
GJM made them. He has offered to make those and the "proper" number decals for the guys competing in the Colorado Rally Championship. Send him a PM and I am sure you guys can work it out. "thumbsup"
HSteve5280
Newbie
Ok , Y'all,
I'm in love w/ the xv-01, going to swap my current brushed system:
- 35A Dynamite 12T ESC, Also have a Tamiya Sport-Tuned(Mabuchi 540)
and a GT-Tuned 25T(rebuildable) Tammy motor into a 1/2 built TA05V.2 when it's ready for Electronics...
I'm thinking a Hobbywing EZRUN combo from Hobbypartz,
35A ESC, Program. card and a 9T 4300KV brushless motor...
Check it out HERE.
I'm also going to try a Fly-Sky FS-GT-3B(Check it out HERE) pistol Tx as my first surface radio...
Tried FlySky's 6 ch air system about 3 yrs ago, not too pleased,
Their surface Tx's are gettin Great reviews on all sites I've looked at...
For 40 Bucks w/ Rx, $7.50ish per addit'l rx, I'd be nuts not to try it out.
Ultimate RC has given this radio a huge thumbs up, I trust his reviews(just look at his 'durability Montage" segments on Youtube...)
What say you?
I'm in love w/ the xv-01, going to swap my current brushed system:
- 35A Dynamite 12T ESC, Also have a Tamiya Sport-Tuned(Mabuchi 540)
and a GT-Tuned 25T(rebuildable) Tammy motor into a 1/2 built TA05V.2 when it's ready for Electronics...
I'm thinking a Hobbywing EZRUN combo from Hobbypartz,
35A ESC, Program. card and a 9T 4300KV brushless motor...
Check it out HERE.
I'm also going to try a Fly-Sky FS-GT-3B(Check it out HERE) pistol Tx as my first surface radio...
Tried FlySky's 6 ch air system about 3 yrs ago, not too pleased,
Their surface Tx's are gettin Great reviews on all sites I've looked at...
For 40 Bucks w/ Rx, $7.50ish per addit'l rx, I'd be nuts not to try it out.
Ultimate RC has given this radio a huge thumbs up, I trust his reviews(just look at his 'durability Montage" segments on Youtube...)
What say you?
HSteve5280
Newbie
:roll:Since I'm here:
I'm new to tires. Everyone I've talked/chatted/Txt'd/FB'd says they are the critical element.
Turtle,
You are primarily sticking w/ stock tires, although tweaked, correct?
I'm about 2 miles outside of D/T Denver by East High School, so I'm running my car mainly on asphalt P/Lots and local running trails around City Park and vicinity(mainly fine gravel or plain dirt). I would say 75% asphalt, 25% trail....
I tried the soft slicks that came w/ tmy TA05V.2 as well as the stock blocks,, much better performance on pavement, not so much on dirt/gravel, but good performance from my POV.
I'm looking at street 26mm tires w/ some tread mainly tamiya., I'm just confused re: other manufacturers and their compounds, kind of like a newbie(ME!) and shock oil...
Should I look at other brands or am I overthinking this?
If you link me to a thread in this forum, I'll be really embarrassed, 'cause I searched 3x b4 posting this...:wink:
I'm new to tires. Everyone I've talked/chatted/Txt'd/FB'd says they are the critical element.
Turtle,
You are primarily sticking w/ stock tires, although tweaked, correct?
I'm about 2 miles outside of D/T Denver by East High School, so I'm running my car mainly on asphalt P/Lots and local running trails around City Park and vicinity(mainly fine gravel or plain dirt). I would say 75% asphalt, 25% trail....
I tried the soft slicks that came w/ tmy TA05V.2 as well as the stock blocks,, much better performance on pavement, not so much on dirt/gravel, but good performance from my POV.
I'm looking at street 26mm tires w/ some tread mainly tamiya., I'm just confused re: other manufacturers and their compounds, kind of like a newbie(ME!) and shock oil...
Should I look at other brands or am I overthinking this?
If you link me to a thread in this forum, I'll be really embarrassed, 'cause I searched 3x b4 posting this...:wink:
Last edited:
