Steering/Suspension Aluminum, Titanium, Delrin links. Custom made

[93-306]

I am in need of 2 bent lower Ti links stock AX-10 length to use revo ends.

 

[Erik D_lux]

I am in need of 2 bent lower Ti links stock AX-10 length to use revo ends.

PM sent

 

[PipeDreams]

Been looking for some bent uppers for my viper. When you get some more knuckle weights in I may have to order some uppers too. Do you recommend the al or ti? Thinking the 1/8 ti might have too much flex when diggin... am I wrong? I've never used ti on anything so I don't know.

 

[Erik D_lux]

Been looking for some bent uppers for my viper. When you get some more knuckle weights in I may have to order some uppers too. Do you recommend the al or ti? Thinking the 1/8 ti might have too much flex when diggin... am I wrong? I've never used ti on anything so I don't know.

I would give the AL uppers a shot. 1/8 TI is only good on 2.2 in short lengths. As long as your uppers are, I would not try it, especially if they are bent.

 

[PipeDreams]

Cool thx.

 

[Bcampisi]

Whats the cost of upper and lower links in TI for a mini juice?:mrgreen:

 

[Erik D_lux]

Whats the cost of upper and lower links in TI for a mini juice?:mrgreen:

Uppers would be $13/pair or $26 total.

Lowers would be $29/pair or $58 total.

All 8 links for $75

 

[Bcampisi]

I will be in touch once all MRC stuff gets to me"thumbsup"

 

[nik81818]

lnc with lcc chassis and links want to switch out all the lower links with bent ti links that use the stock ends

 

[nik81818]

just ordered a set of bent ti links for my lnc. order number 1612624 can't wait to get em. I've only heard good thing bout these links

 

[nik81818]

 

[Gimp]

What type of steering link would you suggest for a class 3 scaler (10ish lbs)?

Thanks!

 

[Erik D_lux]

What type of steering link would you suggest for a class 3 scaler (10ish lbs)?

Thanks!

PM sent

 

[Erik D_lux]

Enjoy your new clearance!

 

[Randy_4life]

i got a Rockshow SS for my XR10 and just ordered the vanquish upper link mounts is it possible for you to make Ti uppers for me?

 

[RockDrifter]

Hey would it be possible to meet up and go over some of the links for a xr10?

I'm local in Draper. I want to cover everything that links together.

BTA link. Uppers. Lowers.

Read through this thread and seen a few people ask for xr10 links but didn't know if you had made them yet... so ill donate my truck for some D-Lux magic for all of you guys that don't know what measurements to give him.

Stock chassis with a home made electronics plate.

Pm me please.... lol guess I could do the same...

 

[Erik D_lux]

i got a Rockshow SS for my XR10 and just ordered the vanquish upper link mounts is it possible for you to make Ti uppers for me?

Sending PM

 

[nik81818]

Enjoy your new clearance!

ya the clearance helped alot thanks for the awesome links

 

[crawlski]

I also am iterested in a set of front and rear upper Ti links for a rockshow ss with front and rear vanquish link mounts, are these possible?

 

[Erik D_lux]

I also am iterested in a set of front and rear upper Ti links for a rockshow ss with front and rear vanquish link mounts, are these possible?

Anything is possible. I just need to know eye to eye lengths on the rod ends and I also need to know what the profile of the links need to look like.