Gun and knife picture thread!

[Randy Williams]

Para Expert .45 ACP

 

[hpiguy]

^^Very nice "thumbsup"

 

[JeepinDoug]

This thing is finally finished and the list is huge.
J&D machine lower receiver
Ergo right hand grip
V7 Ti grip screw
Geiselle 3gun Dynamic trigger group
KNS Anti-rotation pins
Seekins mag catch
V7 ultra light 7075 mag catch
V7 Ti 60* selector
2A Armament Ti take down pins
V7 Ti QD plate and nut
Minimalist stock with paracord
JP enterprises silent captured spring buffer
Vltor Mur1 upper receiver
Spikes NiB coated low mass bolt carrier group
VooDoo 14.5" .223 MP profile barrel
V7 Ti gas block
V7 Ti barrel nut
Bravo Company Keymod rail
Ferfrans muzzle break CRS (pinned and welded)
Magpul poly Buis
Inforce tactical led light
MI keymod rail panels
Vertex reddot (the last piece to replace with Browe or Trijcon ACOG)
As pictured weighs in a 7lbs 6.5oz.
This is my funnest AR rifle, that's why I've spoiled it so much.

Next time I'll post up my favorite AR pistol......it has a good list also. 8)

 

[winnerone23]

Apparently, rc's aren't my only problem!

CRKT A.B.C. operator's knife

I have a custom compression fit sheath, that will be most likely taking the stock sheaths place..

 

[winnerone23]

Ok, let's try something a little different for me.. And my first!

I was looking for a G30 but for the price of this G26, 3x clips and holster.. I can shoot 800 more rounds of ammo to equal the same price! [emoji106]

 

[hpiguy]

I was anti Glock for years. Till some friends got me shooting theirs, and I finally ate my crow, admitted I was wrong, and have a G26 that will go to the grave with me. I love that thing, and shoot it better than handgun I've owned.

 

[JeepinDoug]

Here's my favorite AR pistol.
Not quite finished, I need to make a dedicated barrel nut to be able to use a Geiselle MK4 rail with a Adam's Arms piston conversion, on the long list.
But I love shooting this, it is soooo much fun.
Started life as as a Anderson Arms 80% raw lower.
Spike's NiB coated Battle trigger group with JP enhanced 2lbs pull springs.
Umbrella Corp grip
Alot of Noveske on this one;
Noveske 60* ambi selector
Noveske extended take down pins
Strike Ind Poly dust shield
Phase 5 trigger guard
Adam's Arms piston conversion for pistols
Some no name forged upper receiver coated in Nickle Teflon
MagPul Poly buis
VooDoo 7.5" .223 barrel
Fortis Keymod/Picatinny rail
MI keymod panels
Noveske Barricade as handstop
Noveske KX-5 flash suppressor
Ranier Arms Rapter ambi charging handle
KAK pistol buffer tube
JP Enterprise Silent Captured Spring buffer assembly
EOTech EXPS3
Hex mag, which has a hard time fitting in my 80% stuff.
I love the Sig SB-15 for shouldering but as right now that is a felony as per the ATF.

So it's back to the FDE foamie;

I'm sure I posted this pic here before but screw it..........it's an awesome pic. A friend of mine shooting this AR pistol with my old optics.

 

[dezfan]

My Yankee Hill Spector Diamond XL.

 

[dezfan]

Added one of my Grail Guns to the collection today!

Bulgarian Arsenal SAM7-SF!

Milled receiver, Ambi- safty, Right side folding stock, sight rail, Styer cold hammer forged, chrome lined barrel, Bulgarian AK74 style brake.

 

[ghtpdm5]

picked this up yesterday. should cure the coyote problem around here. only thing else i'm going to do is maybe upgrade the rear sight, not really digging a lot of the optics mounting options i'm seeing. the stock is an ati i got on sale, and the bore on this thing is mint.

 

[dezfan]

picked this up yesterday. should cure the coyote problem around here. only thing else i'm going to do is maybe upgrade the rear sight, not really digging a lot of the optics mounting options i'm seeing. the stock is an ati i got on sale, and the bore on this thing is mint.

Good ol' Mosin Nagant.

Once I find a nice M38 or M44, I'll be adding a Mosin to my collection."thumbsup"

 

[Metal Militia]

Iv been thru about 4 different scope mounts on my Mosin trying to find one thats sturdy. I was trying to avoid it but i think drilling and taping the reciever for a rail or an original pu style mount is the best option.

 

[ghtpdm5]

that's the problem i see as well. most base off the existing rear sight base, using the pivot as a mount point. not ideal. i found a peep sight that replaces the stock sight plate, and uses a screw for adjustment instead of the slider. seems like a better system and has windage adjustment too.

Nagants | Mojo Sights

i'm also trying to keep it as simple as possible on this one. the scope itself would cost more than i've spent on the rifle, the sight is 84 bucks (a bit steep, but if its easier to work with, i'll take it). and doesn't add any height to the gun. different strokes for different folks, i'm just looking for a simple farm gun that can blast the coyotes and have some fun with too, you could be building for precision shooting or hunting various game.

 

[Metal Militia]

Yea, one of mine was one that used the rear sight hinge. Im building mine as a long distance/precision range toy.

 

[salmonfacesalad]

Stoners are great!

Added one of my Grail Guns to the collection today!

Bulgarian Arsenal SAM7-SF!

Milled receiver, Ambi- safty, Right side folding stock, sight rail, Styer cold hammer forged, chrome lined barrel, Bulgarian AK74 style brake.

 

[salmonfacesalad]

Dez

I picked up a wasr 10/63 ( I know I know ) and decided to dive right in. I saw your name on the files and remembered it from RCC! Nice trade btw. You made out well.


Gun plumber seems like a nice guy.

 

[salmonfacesalad]

 

[salmonfacesalad]

 

[dezfan]

Dez

I picked up a wasr 10/63 ( I know I know ) and decided to dive right in. I saw your name on the files and remembered it from RCC! Nice trade btw. You made out well.


Gun plumber seems like a nice guy.

Oh crap, you're a Filers too! :shock:

The sickness is spreading! "thumbsup"

IDK about GB, he can come off sometimes to be a bit of a know it all douchebag.


But from what I've seen, his smith skills are pretty good.

 

[dezfan]

Holy crap!

I'd love to have that 9mm Tavor!

The furniture on both of those WASRs looks great."thumbsup"