YES it is Unami, Green Lane was booked that day.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
YES it is Unami, Green Lane was booked that day.
GREEDY GENIUS
Rock Crawler
Looks good man!
cbp27
Rock Crawler
If Unami is the place across the road from GL then I'm fine with that! After months of not crawling I'll go anywhere haha
Thanks! Looks like your FJ is coming along nicely "thumbsup"
cbp27
Rock Crawler
Don't worry guys, I'll be there. "thumbsup"
Two front upper links and a shorter Junfac 82-117mm driveshaft are on the way. The VP dig is so close to the rear axle that even shortening my MIP driveshaft wouldn't have worked. It should be up and running again this weekend...I hope. :mrgreen:
This is how much overlap I had with the rear driveshaft...
Two front upper links and a shorter Junfac 82-117mm driveshaft are on the way. The VP dig is so close to the rear axle that even shortening my MIP driveshaft wouldn't have worked. It should be up and running again this weekend...I hope. :mrgreen:
This is how much overlap I had with the rear driveshaft...
cbp27
Rock Crawler
Topless skull-faced Jeep anyone?!
Better clearance up front for the super swampers and topless for a roll cage!
The amber LEDs are now dangling and look like rock lights. I'll have to include my 10 led set that's gathering dust at some point.
Interior is still off during construction.
Better clearance up front for the super swampers and topless for a roll cage!
The amber LEDs are now dangling and look like rock lights. I'll have to include my 10 led set that's gathering dust at some point.
Interior is still off during construction.
cbp27
Rock Crawler
Thanks man! :mrgreen: I'll reveil them soon haha
cbp27
Rock Crawler
Well, my Jeep is in the mail and will soon be in the hands of Trenton (MG200). "thumbsup" Can't wait to see what he comes up with! :mrgreen::mrgreen::mrgreen:
MG200
Chassis & Tubework Vendor
Looking forward to getting this JK caged up"thumbsup"
GREEDY GENIUS
Rock Crawler
I'm sure it will be sick"thumbsup"...lookin forward to it myself:mrgreen:
VintageCopal
Quarry Creeper
This is the coolest scaler build i have seen out of all threads... This is awesome man, i like what your doing with you JK... Keep up the good scaling!:lmao:
"thumbsup""thumbsup""thumbsup"
"thumbsup""thumbsup""thumbsup"
cbp27
Rock Crawler
Thanks for the complements guys! Can't wait for the new look!
I figured now that I'm getting more into the performance mods I'll post an updated list of what it's running.
Now
Chassis
Electroncis
Body/Interior
Future
I figured now that I'm getting more into the performance mods I'll post an updated list of what it's running.
Now
Chassis
Axial SCX-10 Chassis
Axial SCX-10 Axles (no mods)
Axial Transmission
Pro-Line PowerStroke Scaler Shocks (90mm)
Axial Plastic 4-link (rear)
Dinky RC 4-link (front)
Traxxas Jato Red Aluminum Push Rod Links
RC4WD Front Upper Links
MIP C-Drive Spline (front)
JunFac Universal Shaft (82-117mm) (rear)
VP Hurtz Dig
Hand Bros. CMS
Golden Horizons Black Aluminum C Hubs and Knuckles
RC4WD Tough Armor Front/Rear Bumpers
JunFac Wheel Wideners
CAC 2.2 Delrin Beadlock Wheels
Pro-Line 2.2 Super Swampers with Memory Foams
8oz. front/6oz. rear wheel weights
Axial SCX-10 Axles (no mods)
Axial Transmission
Pro-Line PowerStroke Scaler Shocks (90mm)
Axial Plastic 4-link (rear)
Dinky RC 4-link (front)
Traxxas Jato Red Aluminum Push Rod Links
RC4WD Front Upper Links
MIP C-Drive Spline (front)
JunFac Universal Shaft (82-117mm) (rear)
VP Hurtz Dig
Hand Bros. CMS
Golden Horizons Black Aluminum C Hubs and Knuckles
RC4WD Tough Armor Front/Rear Bumpers
JunFac Wheel Wideners
CAC 2.2 Delrin Beadlock Wheels
Pro-Line 2.2 Super Swampers with Memory Foams
8oz. front/6oz. rear wheel weights
Electroncis
CC Sidewinder ESC
CC BEC (wired directly to HiTec servo @7.4 volts)
HiTec 7950TH Servo
S200 Dig Servo
Spektrum DX3e
Integy 35T Motor
2s 3000mah Lipo
CC BEC (wired directly to HiTec servo @7.4 volts)
HiTec 7950TH Servo
S200 Dig Servo
Spektrum DX3e
Integy 35T Motor
2s 3000mah Lipo
Body/Interior
Pro-Line 2Dr Jeep Wrangler JK
Axial Headlight buckets
Custom Strobe LEDs
RCModelex JK Rubber Mirrors
Garden Trucking wipers
Custom antenna
Custom license plate
Custom styrene interior
Axial interior details
Recaro Racing Seats
Pro-Line Scale Accessories
Axial Headlight buckets
Custom Strobe LEDs
RCModelex JK Rubber Mirrors
Garden Trucking wipers
Custom antenna
Custom license plate
Custom styrene interior
Axial interior details
Recaro Racing Seats
Pro-Line Scale Accessories
Future
MG200 Custom Chassis! :mrgreen:
Holmes Torquemaster 540 40T Motor
3s 1800mah 25C Lipo
Holmes Torquemaster 540 40T Motor
3s 1800mah 25C Lipo
Last edited:
cbp27
Rock Crawler
Haha oops, just changed it "thumbsup" Getting close to the rally car trade :mrgreen:
cbp27
Rock Crawler
My Jeep is currently lost in the mail somewhere, but hopefully it will arrive at Trenton's soon.
My front upper links are ready for installation. Accidentally got 3M threaded rods instead of 4M (to use Traxxas Jato ends with), so I had to use some nuts with Axial ends to get the right length. Can't wait! :mrgreen:
My front upper links are ready for installation. Accidentally got 3M threaded rods instead of 4M (to use Traxxas Jato ends with), so I had to use some nuts with Axial ends to get the right length. Can't wait! :mrgreen:
cbp27
Rock Crawler
The mailman brought some goodies today! :mrgreen:
After a year of using the stock Axial shocks I thought it was time for an upgrade.
Saw another member on here using one of these mini ammo cans. Probably a little too big scale-wise but I think it will look good! "thumbsup"
Isn't it cute? haha
After a year of using the stock Axial shocks I thought it was time for an upgrade.
Saw another member on here using one of these mini ammo cans. Probably a little too big scale-wise but I think it will look good! "thumbsup"
Isn't it cute? haha
TXJeeper1
Quarry Creeper
I have some of those mini geocache containers (for caching) I may have to use one for something in my YJ build. Really nice Jeep man I love all the stuff. I can't wait to see the tube work.