Wild Bill Massey
Newbie
Any update on these?
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Yeti XL Solid Front Axle by Helios RC
- Thread starter Helios RC
- Start date
ChucksSummit
Newbie
Did I just scroll through all the posts and not notice any pictures of these actually installed?
Another question I keep getting asked:
How do I install the solid front axle on my Yeti XL?
Answer:
You probably won't be doing that. The axle conversion is for advanced builders who are making their own chassis. If you want to mount it to the front of your XL you have 2 options:
1. Cut up the current chassis and fabricate mounts.
2. Get a second chassis and cut both in half. Then stick the two back ends together.
Sent from my iPhone using Tapatalk
How do I install the solid front axle on my Yeti XL?
Answer:
You probably won't be doing that. The axle conversion is for advanced builders who are making their own chassis. If you want to mount it to the front of your XL you have 2 options:
1. Cut up the current chassis and fabricate mounts.
2. Get a second chassis and cut both in half. Then stick the two back ends together.
Sent from my iPhone using Tapatalk
ChucksSummit
Newbie
Thank you for pointing out the pictures. I am sorry as this is in the Yeti XL part of the forum, I presumed that this would work on a Yeti XL, hence the reason I asked for pictures installed. I'm not sure but the truck above doesn't look like the Yeti XL I own......?????
I am sincerely sorry for the sarcasm ( maybe not completely ) but come on, the way this is posted, it could leave someone to believe it's intended for the Yeti XL.
I am sincerely sorry for the sarcasm ( maybe not completely ) but come on, the way this is posted, it could leave someone to believe it's intended for the Yeti XL.
Last edited:
Chuck,
I can understand the confusion. That's why we have said it's to convert the solid axle to a steering axle from the beginning and use it in custom builds. It's not to put a solid axle on the front of your XL. The axle is for advanced builders that want to use the XL and build something unique.
The truck in the pictures uses the XL axles front and rear and generally we classify a rig by its axles, so this is a fitting place for it. Eventually there will be a 1/8 scale XL based monster truck section, but for now this is all we have. That truck was built to showcase the axle conversion and encourage others to build something.
As far as looking like your XL, you can use the parts and add rear steering to your truck.
Sent from my iPhone using Tapatalk
We started to look at doing a new set of knuckles that would fit the conversion and stock, but there aren't too many bearings available that would work as be easy to get.
Do you have any thoughts about bearing size? I'd love to pick something that is available from Boca or Fast Eddy.
Sent from my iPhone using Tapatalk
redsawacs
RCC Addict
I think some were considering this axle for a rear steer and perhaps 1/8 crawler duty, that may explain some of the criticism.
What I still can not see is detailed pictures of the axle, not of the build...no one cares about the build...they want to see the axle!
Take thw wheels off and get some close ups, get serious about advertising and perhaps you spark some orders!
What I still can not see is detailed pictures of the axle, not of the build...no one cares about the build...they want to see the axle!
Take thw wheels off and get some close ups, get serious about advertising and perhaps you spark some orders!
I will have to look. I know that I had good luck with my losi 8ight bearings. Could always use a spacer if the axle shaft is too small. I have not done any measuring. I'm sure many others here have way more knowledge than me. I'll look at sizes when I get home.
Sent from my SM-N900V using Tapatalk
Sent from my SM-N900V using Tapatalk
don't mind the 7950 with liquid electrical tape on it
Can you guys see these pictures? They are in post 2.
So let me get this straight; if I put these pieces on my rear axle housing, along with the steering knuckles and front CVJ axles from the front of a yeti XL, and add a steering servo, I could have steering on the rear of my yeti XL? I was just wondering about the steering knuckles and which axles would be used I'm assuming it's the front CVJ axles and front steering knuckles from the stock front end of a yeti XL...correct?
redsawacs
RCC Addict
Any idea when the Beta testers will post their findings? Any word whether the rear wheel steer will actually fit on the YXL using this set up?
