• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

What powers your SCX10?

Holmes Ble Pro
Tekin roc 412 3200kv
2s and 3s.
Unbrandet 15kg servo.
castle 10A bec
14t pinion and 87 spur.
 
Current setup:

Mamba micro pro
Puller pro stubby 3300kv
3s lipo
Stock gearing
Bls500 servo
Castle bec


Light, smooth, fast, and able to crawl extremely slow. Personal favorite 1.9 combo right now.
 
Castle Sindewinder 3
Axial 27T
3S Lipo (4500mAh, 45C)
PowerHD LF-20 MG servo

Very versatile combined with the 2 speed gearbox
 
im using a traxxas XL-5 ESC with an RC4WD 35t brushed motor in my scx10 burly mud truck. 84t spur and 23t pinion.
 
Re: Please list your SCX10 Motor, Battery, and ESC here!

Holmes puller pro 2200kv 540 brushless
Holmes hobbies bxl trail master WP
Hitech 7958 Ti gear
Venom 5000 mah 20c 3s

Sent from my SAMSUNG-SM-G870A using Tapatalk
 
Holmes Hobbies Torquemaster Expert 27T
Holmes Hobbies BR-XL
Savox 1210sg
3S Lipo 2200 and 2700
Spektrum DX4S

I love reading through this thread and seeing all the people using Holmes Hobbies! The best on the market for sure!
 
Re: Please list your SCX10 Motor, Battery, and ESC here!

HH Trailmaster Sport 35t
HH BRXL WP
Savox servo, forgot which one
2x Venom 2s 5000mah 20c in series for comp, parallel for trail
Spektrum dx4s because no one had a flysky in stock when i needed a radio, lol.

Sent from my XT1585 using Tapatalk
 
stock deadbolt electrics, with a HH 27T torquemaster, runnin a traxxas 5200mAh 2s lipo,,, (sometimes a little 2200mAh 2s)
 
Our new Deadbolt (my son's truck) is still all stock aside from an added CC BEC, running 3s 2200 lipos.......

My ACX10 2.2 project which I've been running for years is running the following:

3s 2200 lipos, Tekin FXR, Tekin 55T, CC BEC, can't remember the gearing right now, and a HiTec 7955TG servo.

I like to use the 3s 2200s because they are what all my airplanes use, and they are fairly light...and cheap... Both trucks have a battery plate in both front and rear...
 
Tekin Gen2 RX8 ESC
Tekin ROC 412 2300KV motor
Savox 1210 servo
5000 mAh SMC LiPo
Stock gears in axle and stock plastic tranny gears (3 n half yrs old, n no signs of letting go. stock slipper setting, and I'm not nice to this lil rig when I'm on trail.)
 
I'm new to RC and just got out of full size Jeeps.

Just installed
XTM Racing X60 EXC
X540 3900KV Brushless Motor
Venom 5000 30C Lipos
Everything else is stock for now.
 
Last edited:
Axial AE-5 ESC
RC4WD 55T Motor
Venom 5000mAh 7-cell NiMH

Not the best set-up, but it was fairly cheap. Also, I get 2+ hours of runtime, even when continuously rock crawling on rough, sandy terrain. The only 2 issues I've had are motors wearing out every 2 - 4 months (what do you expect for $10?) and having to replace the plug on the ESC; apparently Venom batteries wear out Axial plugs fairly often, at least that's what the guy at the hobby shop said. I've only had that issue once in 2 years though so...
 
Back
Top