Where off to, Gula?
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Did some more work. Welded on some 1×1 sqare tube, and I contoured it to fit to the frame. This is in support of the giant tv that'll be hanging off the front. I'm going to add 2 more and a couple of cross braces
Attachments
Nice build. I did this enclosed trailer for my crawler back in 2019-2020. I ended up selling it just a couple trips after I finished the build due to back troubles (didn't want it to sit for 1.5yrs while I was having surgery and recovering).
Attachments
Goro, at my rate, hell, lol. Staying close by for my childrens sake, for now, but, Texas is the ultimate destination. I'm a Disabled veteran, and that state is so much cheaper to live in and has so much more to offer than California does for me. Cost of property alone!
Did some more work on the trailer.
Did some more work on the trailer.
Attachments
RudyF6
Pebble Pounder
Had to get this guy out, it's been a while. It's the rig that got me back into RC when I was bored during covid.
Redcat Shredder 1/6 scale(?) 4s brushless, it's as fast as I have room to run it and has good brakes!
I've beat this thing for 4 years and 2 sets of batteries and never a breakdown!
Last fall I thought I broke it doing backflips and barrel rolls when I lost steering. looked like a busted bellcrank, but when I tore it down I only found a screw and nut missing! And found the missing hardware rolling around the chassis tub!
Anyways, the Shredder still does!
Redcat Shredder 1/6 scale(?) 4s brushless, it's as fast as I have room to run it and has good brakes!
I've beat this thing for 4 years and 2 sets of batteries and never a breakdown!
Last fall I thought I broke it doing backflips and barrel rolls when I lost steering. looked like a busted bellcrank, but when I tore it down I only found a screw and nut missing! And found the missing hardware rolling around the chassis tub!
Anyways, the Shredder still does!
RudyF6
Pebble Pounder
Close, but tires are smaller. Much lighter and built like a pan buggy.
skinnyj
Pebble Pounder
Started cleaning out my stepdaughter's bedroom. She moved out and, of course, left her room the hell-hole it has always been. 
Made a Guinness Ground Beef Pie for dinner.
When the wind finally stopped blowing, I got to play outside for a bit.
Made a Guinness Ground Beef Pie for dinner.
When the wind finally stopped blowing, I got to play outside for a bit.
Got the last of my things (other than shop vac, and some insulation) out of my garage, "ex's house". Got a few 4 and 5 letter words to describe her, you know!? and just packed it into the trailer.
Funck, I'm way overweight, I believe!? I don't even have the car (1:1) in there, yet, WONT even fit! just toys, tools and I have an inch of suspension travel left before the bump stop.
Still lots of shuffling to do to make things fit.
Goro, you need another Tundra body!
lol
However, this is on a regular hitch, as the weight distribution hitch from the old travel trailer is in the trailer.
Or i may have to backwards the racecar into the trailer to distribute the weight better. We'll
.
Good thing I worked for a transportation outfit that has the ability to weigh and balance my load for me. I'll travel there and weigh my tongue weight tomorrow's and each axle weight too!
Funck, I'm way overweight, I believe!? I don't even have the car (1:1) in there, yet, WONT even fit! just toys, tools and I have an inch of suspension travel left before the bump stop.
Still lots of shuffling to do to make things fit.
Goro, you need another Tundra body!
lol
However, this is on a regular hitch, as the weight distribution hitch from the old travel trailer is in the trailer.
Or i may have to backwards the racecar into the trailer to distribute the weight better. We'll
. Good thing I worked for a transportation outfit that has the ability to weigh and balance my load for me. I'll travel there and weigh my tongue weight tomorrow's and each axle weight too!
Attachments
Did you score that or are you really trying to offer it to me?? lol
Added some more scale to the Tundra.
View attachment VID20250327002351.mp4
Goro, yes, thats an offer, if interested, 
?!, lol
"So this happened as I was taking the trailer to the storage". You know, good old doofus, Me pulling up to the Military base, realizing I need my wallet. I'm patting down my pants and jacket to no avail. Oh, yeah top drawer of the tool chest!!!!!@@!!!!!, behind the truck, in the trailer, NOPE, it's still at fffffffuc... home, the.place I'm staying......arrrrrrrr
I didn't lock the drawers, doh Resting on a 500 Duckett leather chair. TV is still in one piece, so....... I was able to push the upper drawers back in all at once, tilting the whole shebang. That bithc is "heavy" ,and from what I can tell the bottom drawer is possibly good, but the one side slides is more than likely toast and one side the two sliders are completely pretzels like, fukct. Fun night
?!, lol"So this happened as I was taking the trailer to the storage". You know, good old doofus, Me pulling up to the Military base, realizing I need my wallet. I'm patting down my pants and jacket to no avail. Oh, yeah top drawer of the tool chest!!!!!@@!!!!!, behind the truck, in the trailer, NOPE, it's still at fffffffuc... home, the.place I'm staying......arrrrrrrr
I didn't lock the drawers, doh Resting on a 500 Duckett leather chair. TV is still in one piece, so....... I was able to push the upper drawers back in all at once, tilting the whole shebang. That bithc is "heavy" ,and from what I can tell the bottom drawer is possibly good, but the one side slides is more than likely toast and one side the two sliders are completely pretzels like, fukct. Fun night
Last edited:
RudyF6
Pebble Pounder
Today?
Replaced the exhaust (cat back) on my 04 F350.
Just got out of the shower and I think I still have rust in my hair.
And I don't have any!
Replaced the exhaust (cat back) on my 04 F350.
Just got out of the shower and I think I still have rust in my hair.
And I don't have any!
hnoroian
Rock Crawler
Not too bad of a series after not racing for more than 25 years
VoltSCX
Quarry Creeper
Finally got my new remote in and programmed it. It's gaming time.
Put my tires on wheels after painting them neon pink. I actually got them all seated properly for one. Now I need to finish my body bit I have to hear it up and fix some warping that happened when I was trying to speed up primer drying. Lesson learned, lol.
K.O.M.
Quarry Creeper
Dusted off my FreeCAD skills and banged this out during the lunch break. It's for my old AX10 project I've been putting off. I was able to cut a bolt-on extension to the stock chassis, but after nearly cutting one of my fingers with my Japanese pull saw and getting one of my nails nicked by the scroll saw, I decided I should quit while I'm ahead and just draw this up, 3D print it to check to check suspension geometry and hardware location, then send the file over to get waterjet/plasma/CNC'd out of 3mm Al.
if ya dont leave clearance for the motor its gonna get wide on ya just sayin
