New SSD SCX10 axle housings

[dpcardoza]

I got my housings and other goodies yesterday. Spent NYE in the shop. Man I LOVE these axles. The gears sit so much better in these than the stock SCX axles. Plus with a little LURC hardware they look the part as well.

What size hardware did you order for this?

Sent from my SM-T320 using Tapatalk

 

[XSRCdesign]

M2x5

 

[Dwill]

Just logged on to RPP to order a set of SSD housings for my new G6 build.
Hesitated because I have a couple questions, ok maybe three actually.

1> will the stock servo mounting plate work or do I need the SSD plate ?
2> will my Vanquish lockouts, knuckles a c-hubs fit ?
3> I'm way too anal to get these things completely bashed up … will these diff protectors fit... Junfac Skid Plate for SCX10 Axle (Junfac diff protectors) ?

Thanks for your help with this.

 

[honchojoe]

Just logged on to RPP to order a set of SSD housings for my new G6 build.
Hesitated because I have a couple questions, ok maybe three actually.

1> will the stock servo mounting plate work or do I need the SSD plate ?
2> will my Vanquish lockouts, knuckles a c-hubs fit ?
3> I'm way too anal to get these things completely bashed up … will these diff protectors fit... Junfac Skid Plate for SCX10 Axle (Junfac diff protectors) ?

Thanks for your help with this.

1. You will need the ssd plate.
2. Yes youe VP bits will fit.
3. No it won't. Nor would you want to as they are good for 1 think only and that is getting stuck on rocks.

 

[Dwill]

1. You will need the ssd plate.
2. Yes youe VP bits will fit.
3. No it won't. Nor would you want to as they are good for 1 think only and that is getting stuck on rocks.

Thank you !

 

[Bananaclip]

For what?

For new parts. I'm needing some ascender upgrades and rear D60 lockouts :mrgreen: we haven't heard from SSD in a while so I'm certain they have been busy.

 

[BadWagon]

Just logged on to RPP to order a set of SSD housings for my new G6 build.

Hesitated because I have a couple questions, ok maybe three actually.



1> will the stock servo mounting plate work or do I need the SSD plate ?

2> will my Vanquish lockouts, knuckles a c-hubs fit ?

3> I'm way too anal to get these things completely bashed up … will these diff protectors fit... Junfac Skid Plate for SCX10 Axle (Junfac diff protectors) ?



Thanks for your help with this.

The only other item is pick up are the SSD steering links, or any set that's bent. The straight axial aluminum link will hit the diff cover before you get to full lock.

 

[OfnaJoe]

The only other item is pick up are the SSD steering links, or any set that's bent. The straight axial aluminum link will hit the diff cover before you get to full lock.

Dang it,didn't think about that, Will they even hit the stock plastic cover?

 

[BadWagon]

Yes they will make contact with the stock diff cover.

I just got my bent SSD steering links yesterday. I'll go out and snap a pic in a few so that you can see the difference.

 

[BadWagon]

Ok wife is in the shower so I was able to sneak out...

I hope this helps y'all out. I'm really impressed with the quality of the parts and the I've additional throw.

Build list is as follows:

SSD D60s (duh)
SSD C-Hubs, knuckles and bent link
Axial AX10 universals
FI Spol
Axial HD overdrive gear
LURC hardware

 

[Dwill]

The only other item is pick up are the SSD steering links, or any set that's bent. The straight axial aluminum link will hit the diff cover before you get to full lock.

I have the Vanquish links on my truck. Had to get them, the stock links won't work with the Vanquish knuckles.

Here's a link to my G6 build. Just finished it (mostly) haven't had a chance to run it outside yet because if the rain.

http://www.rccrawler.com/forum/axial-scx-10/551819-scx10-jeep-wrangler-g6-build.html

 

[OfnaJoe]

Thanks BadWagon, glad I found out now instead of later, got my diffs built just not installed yet

 

[honchojoe]

The other option is measure the old sttering link eye to eye then bent it slightly at each end (you won't need much) then measure again and add small spacers to get back to the correct width.

 

[701scaler]

With the D60's and VP chubs, knuckles what titanium links can your run?

 

[701scaler]

Does the SSD Chassis Mounted Steering CMS Kit for SCX10 come with a bent front steering arm
SSD Chassis Mounted Steering CMS Kit for SCX10

 

[Natedog]

Just logged on to RPP to order a set of SSD housings for my new G6 build.
Hesitated because I have a couple questions, ok maybe three actually.

1> will the stock servo mounting plate work or do I need the SSD plate ?
2> will my Vanquish lockouts, knuckles a c-hubs fit ?
3> I'm way too anal to get these things completely bashed up … will these diff protectors fit... Junfac Skid Plate for SCX10 Axle (Junfac diff protectors) ?

Thanks for your help with this.

1. You will need the ssd plate.
2. Yes youe VP bits will fit.
3. No it won't. Nor would you want to as they are good for 1 think only and that is getting stuck on rocks.

Yes! "thumbsup"

...I hope this helps y'all out. I'm really impressed with the quality of the parts and the I've additional throw.

Build list is as follows:

SSD D60s (duh)
SSD C-Hubs, knuckles and bent link
Axial AX10 universals
FI Spol
Axial HD overdrive gear
LURC hardware

"thumbsup""thumbsup""thumbsup"

 

[Natedog]

For new parts. I'm needing some ascender upgrades and rear D60 lockouts :mrgreen: we haven't heard from SSD in a while so I'm certain they have been busy.

Me three....SSD Ascwnder updates please. "thumbsup"

 

[jaqattack02]

Does the SSD Chassis Mounted Steering CMS Kit for SCX10 come with a bent front steering arm
SSD Chassis Mounted Steering CMS Kit for SCX10

Nope. If you look at the SSD site the instructions show it being installed with the stock arm.

http://ssd-rc.com/downloads/SSD SCX10 CMS Manual.pdf

 

[Bmxreeves]

Hey guys. Anyone had this problem?

Completely tore the truss off, but only on 1 side. Seems weird....


Cheers Jacob

 

[XSRCdesign]

Do you have the center screw in the truss?