Once I changed to .035 rod I had much better luck as well. Cool to see some more progress on these Carey, but I'm sure Hurricane Helene has slowed that down some. We are on day 5 of no power, I'd imagine pretty close to the same for you guys.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Jimmy's build along buggy thread
- Thread starter bgredjeep
- Start date
Good deal on the filler. I'll get that ordered for the next round of welding.
Yep. Same story here. Projected to get power back on oct 5th so we'll see. Thankfully my house didn't have any major damage. Looking at a new roof and some fence work. So many around me have trees through houses and cars so I feel very lucky.
Thanks for sharing your progress in a thread. I look forward to see how it comes along.
The use of printed jigs to gage bends is an excellent method. It's very cool that Josh is putting these builds projects out for folks to enjoy. I am tempted to pick up the files and attempt to just silver solder one together because I already have the simple gear for it.
I am curious to learn how long a tank of argon will last using a tig to weld up these cages. It's the one thing that has me hesitating on the welder.
The use of printed jigs to gage bends is an excellent method. It's very cool that Josh is putting these builds projects out for folks to enjoy. I am tempted to pick up the files and attempt to just silver solder one together because I already have the simple gear for it.
I am curious to learn how long a tank of argon will last using a tig to weld up these cages. It's the one thing that has me hesitating on the welder.
I picked up a size 80 tank, I did a lot of practice and built the full moon buggy cage and still have some left. The guage is fairly low now but hopefully I can do at least stage 1 of the promod off that tank. Then its only $30 for a refill at my local welding supply store.
Last edited:
I just finished fitting up the rest of the stage 2 tubes today. I had hoped to do this 2 weeks ago but the hurricane knocked out power for a week so I'm just getting back to it. I also ordered the .035 rod so hopefully I can work on getting these welded next weekend.
Looks great, how are you liking the tig?
So far I let my buddy handle the tig work. He's got a nice machine, but we had a hard time trying to mimic the settings Josh had suggested for the yes welder in his video. I considered picking up one of those machines, but i have 0 room to stash another welder in my garage. Once he's able to dial in the settings, which the thinner filler rod should help with, I'll give it a shot. I can mig weld, but never have tried tig.
The chassis are out of the stage 2 fixtures. The .035 tig rod worked much better. Cole also ditched the pulse function on his welder and just used the pedal to control the heat which he's more familiar with. I left them with him so he can finish welding them out. He wants to pick up a mini torch for his welder as the inside tubes were tough to get position on with the standard size tig torch.
hnoroian
Quarry Creeper
Honestly have the same problem. I often considered picking up a cheap mini spot welder, like how old NIMH batteries from the factory were made. I wonder how well those tacks would hold up?
They held up pretty well. I would say i could use them again if I wanted to. Since I have no plans of building another of this chassis I tossed them when we were finished with them. That's also a benefit of the bambu (vs my old printer). If i end up wanting to make another some day it's only a few hours to print a new set.
Thanks Marcus. My master plan is to design my own rc buggy chassis based on Cole's buggy (or possibly my own 1:1 rcmfab chassis depending on how long i drag this out). I started drawing up my current crawler a while back but figured i would wait and do the full buggy instead.
I picked up the fully welded chassis Saturday. Making good progress on fitting up thw stage 3 parts. The modification I made at the rear of the chassis worked out pretty well. If I can carve out a few hours this week I should have this stage ready for welding by the weekend.
I had only ordered 1 set, thinking that Cole wouldn't need most of them. Once I opened my scs parts and really looked at what all it had i ordered a second set. The motor mount plate is really the only thing he won't be able to use. I got 2 sets of the aluminum parts as well.
As for the skid, I drew up and printed a prototype 3 gear skid. He's got wraith axles so I widened the link mounts. Should work OK.
