• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

IRIE Products

Put me on the list for a set of axles when available.

I'd likely get the complete steering set at the same time if available.
 
Hello all I just wanted to let all know that I have a bunch of kits done just waiting on bearings. The bearings were on back order for awhile, they have now shipped so I am just waiting on shipping now. As soon as I get the bearings I will assemble and package the kits and send out PM's. As for the axles I am at the mercy of the cryo, they are put in with other jobs and done at the same time to save cost. If I had him cryo these axles bye them selves the price would have to be almost double and I would have to do hundreds of axles at a time.

I understand waiting sucks but I assure you I am getting them all done as soon as I can thanks for everyone's patience.


LOlin
 
Hello all
I have gotten GCM kits done and a few axles back and PM's sent. I am still waiting on more axles but I have sent the PM to those of you who wanted axles in order received.
I have more coming so if you did not receive a PM yet I have not forgotten about you, your axles will be done soon.

Irie
 
Well boys and girls my race prepped axles are breakable. I had not been able to break them so I quit doing any maintenance on them about a month ago to torture test them. I wanted to see what kind of abuse I could put to them with neglect (like maybe some of you do:roll:). I have been actively trying to break them since June when I decided to make the first run of these. I have been running a 5T 4150KV 550 size motor on 2s with 26T pinion, 78 or 86 spur. It will do standing back flips on anything with traction with either gearing, plenty of go it would turn plastic hexes at will so I went to Vaterra metal ones. The CVD pin is what gave up and when it did it made an audible noise, I was probably 10 to 15 feet away and herd it. My son and I were having a long jump contest, I was hitting the jump pined in second (24.7MPH) and jumping about 20 to 25 feet when it broke. We had to keep it pined in the air and on landing to keep the front end up because the jump only counted if you could drive away and the trucks were arcing over real bad.

I was able to rebuild it with a new pin and a little polishing. Because I broke them first this is what I am going to do for you people that believed and purchased axles from me on or before today 9/7/2014. If you break your axle and are willing to ship it to me and pay for the shipping back (shipping and tacking is like 4 dollars in the 50) to you, I will give 1 free rebuild. Just to say thanks and I would like to see the axles.
 
Last edited:
Amen!!! Please send me a pm when axles are ready. My poor twin is still down and out. I do not want to spend money on junk and want the best!!! lol Please let me know. Thank YOU
 
Have not even had a chance to touch them, between my son starting school and my latest resto project :) I have been busy to say the least. Other than my son and I running the crap out of our hammers I have not done much RC. The resto project is going to slow for a bit tell I get more parts so the time should be soon.
 
I understand. I'm busy too. I was just asking cause I'm at a stopping point with all 3 of my hammers till I open the rear diffs. They all put together and tuned how I like them. I'm just messing around with bodies until I can decide on a new project.
 
Here is another video for the Twin Hammers people."thumbsup" It is just clips from playing out in my yard with some music, enjoy.

<iframe width="560" height="315" src="//www.youtube.com/embed/LEXBE6Hb5Rw" frameborder="0" allowfullscreen></iframe>
 
^^damn, I gotta get rid of my grass and haul in some boulders. That is a great playground
 
I am running a Turnigy TrackStar SCT 5T Sensored Brushless Motor 4150KV (550 size) I bought it on a whim I figured if it sucked or if I screwed it up in water I was only out 45 bucks not hundreds like most sensored motors. Now I am super happy with it and I am going to buy 2 more one for my sons hammer and a spare for either. It crawls smooth as can be(full sensored mode) and taped my hammer does 24.7 MPH by my GPS and enough power to do back flips in second from a stop. "thumbsup"
 
great vid"thumbsup"

do you run a locked diff or the ear plug stuff?

Just recieved my full kit for mine looks awsome can't wait to install8)
 
Back
Top