• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

What powers your SCX10?

Tekin FXR
Tekin 35t
Stock Gearing<!-- google_ad_section_end -->
3s thunder power 1350 lipo gets me about 40 minutes hard wheelin.
 
Im super poor, so mine was run with-

tamiya silver can
tamiya cheap stock esc( probably one of the smoothest forward escs ive ever used)
6 year old eflite 7 cell 3000 mah nimh.
TQcrap
stock honcho spur and 16 tooth pinion.
rc4wd 1.9 rock locks


BAM NOW THATS A SETUP!!! :flipoff:

new setup is going to be
old school super chicken
venom 21t double(old style)
flysky fs-gt3b
turnigy 2200mah 3s 40c lipo
1.5 mickey ts

still cheap but better.
 
rig #1 powered by non waterproof holmes hobbies br-xl esc and holmes hobbies 35t torque master sport motor and battery is whatever i put in it ranging from 2000 mah to 5200 mah 2s or 2200 mah 3s

rig #2 powered by axial ae-2 esc and novak fifty-five motor,battery same as rig #1 but only 2s

rig 3 is powered by axial ae-2 esc and holmes hobbies 35t torque master sport and batter same as rig #2
 
Speed Passions Rhino rock crawler with their 30.5 1000kv motor. Was a pain in the butt to get it set up. But a good system so far for a cheap system. Now that its working properly. $70 combo. And Sky 5000 40c hardcase lipo battery.
 
Last edited:
venom 2s 3200 20c lipo
novak rooster crawler esc
Holmes TM 35t sport
robinson hardened tranny gears
MIP drive shafts
stainless screw kit
rc4wd aluminum links and rod ends
rc4wd 1.55 steel wheels
MT 1.55 baja claws
Traxxas 2.4 tx/rx in summit sealed rx box
2075 servo
 
Back
Top