• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

What powers your SCX10?

FX R on 3 cell Lipo. I was running a Tekin hand wound 35t motor but after a few of the cratering from the mud, I switched to the Axial 27t. $60 motor or $12 motor? No brainer.
 
Stock 27turn, Rooster Crawler with 3600 Nimh. And stock gearing. Getting prepared for the lipo switch...
 
battery: 2000mah or 5000mah 2 cell depending on place
esc: castle sidewinder esc
motor: 1380 kv outrunner motor

tons of low end power. enugh that i broke my tranny off of the skid plate in a bind. bit slow like a 55t thinking about gearing up a bit
 
Thunder power 2s 5400mah 35c lipo
Axial AE-2 esc
Axial 27t brushed

22/87 pinion / spur

DNA 1.9 aluminum beadlocks w/ stock flatirons and foams
 
7 cell NI-MH with a Novak Goat 3S and a 21.5T Novak Ballistic Brushless Motor with the stock gearing. Works well so far but the Batteries are HEAVY! Can hardly wait to go Lipo...
 
Novak Rooster ESC
Novak 35T
4600 mah nimh or 2s 3300mah LiPo
Stock Gears
Hitec servo 200oz/in servo@ 7.4 v
DXC3 Radio

Good power and speed with long run times.
 
SCX10 running turnigy 7.4 2s 5000 mah, ansmann 21t drift motor , xl5 geared 20-87 , interco swampers and shes a happy girl , bit of wheelspeed and torque too "thumbsup"
 
BR-XL, 25T Brood Apocalypse armature in an oval brush Epic can, R2HD tranny, 3s, 4s, or 6s :twisted: depending on situation, sitting on 1.9 IROKs.
 
Back
Top