What powers your SCX10?

[bowmansscx10]

2s lrp 21.5 brushless combo with a 90t pinion and 2.2 its fast for what it is and still crawls crazy angles

 

[klabeaume]

14t puller, br-xl esc and 4s lipo 8)

 

[btoungette]

RC4WD 35t Crawler Motor
Holmes Hobbies TorqueMaster BR-XL ESC
Power Wing 2200mAh 30C 2S Lipo

 

[crazy_kanaka]

JP Warrior 35T
CC sidewinder w/ccbec both epoxy potted
2200 2s1p 40c lipo

 

[wally101]

Hilux:

Novak Rooster Crawler with 45T combo with Novak 3s cutoff
Geared stock spur 18 pinion
3s 1300 20C lipo

Bronco:

HH BRXL (waterproof)
35T TorqueMaster Pro
Geared stock spur 15T pinion
3s 1350 30C lipo

 

[Stuntman Jim]

Novak Rooster ESC
HH Puller 7t
1150-3700mAh 20-25C 2s LiPo

 

[jon1197]

traxxas brushless set-up
13t pinion
5000mah 3s 35c lipo

 

[camss69]

Tekin FXR
Tekin 45T
2cell Lipo

 

[alextronique]

Battery: 2S 2200 mah (HobbyKing)
ESC: Castle sidewinder
Motor: RC4WD 45T
Gearing: 20/87
Radio: GT3B
Servo: TRX2070
Tire: Rock cusher 1.9

 

[Evilsage]

Novak Rooster Crawler 55T and a 1300 2cell Lipo

 

[crumplez0ne]

I just got into an scx10 and am using:

cc mmp esc
cc 3800kv 1410 1Y motor
4000mah 20c 2s venom
13/87 gearing

not a typical crawling setup but the low speed control is quite good and top end is nice.

 

[UPSman]

about time for someone to update it, no?

 

[Infantry667]

5400 2s lipo from losi, and novak goat, awesome setup!"thumbsup"

19t pinnion

what kind of torque:speed ratio does that give you, sounds like an awesome setup, I'm looking to make my scx10 faster but keep it a good crawler, any suggestions?

 

[Danboard]

Just built my first kit.

Battery: Duratrax 6-Cell 4600Mah NIMH
ESC: Tekin FXR
Motor: Tekin 35T HW
Stock gearing
Servo: Traxxas 2075
Radio: Spektrum DX3E.

 

[dodgesavageone]

I run a hobbywing 60a esc and there 13.5t brushless. Venom 7 cell 5000mah with 87/16 gear. I love it tons of drag brake and wheel speed when I need it. Controlled by a 6 channel hobby king 2.4ghz radio.

 

[mikeman84]

HH 7t puller, axial ae-2, 5000mah 30c 2s lipo, stock gears, iroks on front cut boggers on rear

 

[crumplez0ne]

I ditched the castle motor for a tekin redline 10.5t but everything else is the same... top end is maybe a smidge faster but the low end control is so nice with the sensored motor.. wow!

I just got into an scx10 and am using:

cc mmp esc
cc 3800kv 1410 1Y motor
4000mah 20c 2s venom
13/87 gearing

not a typical crawling setup but the low speed control is quite good and top end is nice.

 

[ofna22]

Esc-castle sv2
Motor- traxxas 27 turn
Batt- 2200 3s lipo x2 in parallel.
Radio- futaba 3pk
Receiver- futaba 603ff
Servo- hitec 7955tg
Castle 10a bec

 

[ausjethro]

ESC= RCLine PC Series-348 amp continuous current-1200amp peak current.
MOTOR= LRP Crawler 3 55T brushed motor.
BATTERY= Dualsky 1700Mah 35C 2S Lipo.
SERVO= Traxxas 2075 waterproof.
RADIO= Spektrum DX3R Pro.
RECEIVER= Spektrum.
SPUR GEAR= Stock.
PINION= 14T.
WHEELS= Stock.
TIRES= RC4WD 1.9 Super Swampers.
LOWER LINKS=Traxxas red alloy.
SHOCKS= G-Transition red-internal springs.

 

[SDheavymetal]

Tekin FX R
35T hand wound
3S lipo
16 87 gears