ToyZuki's SCX10.2

[Waitwhatsthat?]

Thanks for the quick replies. I'll start with the 13/56 since that's the smallest pinion I have on hand. I'll buy a smaller one if it turns out I need to.

Sent from my XT1585 using Tapatalk

 

[Waitwhatsthat?]

So here is an update. After two runs , one in the dirt and one on the rocks, the truck performs great. 13/56 gearing on 3s with the 1900kv system seams perfect. I'm very pleased with everything. Thanks again.

Sent from my XT1585 using Tapatalk

 

[Inspector86]

How much does one of these compete rigs weigh compared to the 10.2?

 

[gunder463]

nice kit, just got mine. also is there a replacment for the part# AXI31410 i cant seem to find one any where.

 

[wrightcs77]

nice kit, just got mine. also is there a replacment for the part# AXI31410 i cant seem to find one any where.

Dlux sells them on his site

Sent from my Pixel XL using Tapatalk

 

[dannan_w]

I was looking to build a new class 1 with this chassis, what's up with the new rules? Can the skid be mounted non angled?

Sent from my SM-G930V using Tapatalk

 

[wrightcs77]

I was looking to build a new class 1 with this chassis, what's up with the new rules? Can the skid be mounted non angled?

Sent from my SM-G930V using Tapatalk

No. They are working on a c1 chassis. They were waiting for the rules to be released.

Sent from my Pixel XL using Tapatalk

 

[Col_Sanders]

Even if you could mount the skid flat, it would not be allowed for Class 1 since the shock hoops are integrated into the chassis rails.

 

[fr8cture]

Even if you could mount the skid flat, it would not be allowed for Class 1 since the shock hoops are integrated into the chassis rails.

and its not metal.

 

[GTSLOW]

and its not metal.

Oh hi there.

Sent from my Pixel XL using Tapatalk

 

[Teng]

Any news ( Review ) for the 2.5 chassis yet?

 

[Johan_Eriksson]

Any news ( Review ) for the 2.5 chassis yet?

It is basically a v2 but with different gears that is all. I am not sure if there is a difference in the over drive though.


Skickat från min iPhone med Tapatalk

 

[fr8cture]

It is basically a v2 but with different gears that is all. I am not sure if there is a difference in the over drive though.


Skickat från min iPhone med Tapatalk

2.5 has more overdrive

 

[Johan_Eriksson]

2.5 has more overdrive

How big is the difference then?


Skickat från min iPhone med Tapatalk

 

[revin9k]

Love the kit and plan to buy one soon for a class 2 build. Did you guys ever make a class 1 legal kit?

Sent from my SM-G965U using Tapatalk

 

[intheworks]

My V2 chassis should be here any minute. I have a load of goodies waiting for it and I cant wait to get this build going!!!! 30% overdrive by design IM STOKED :mrgreen:

 

[marcosdo99]

can i use the 2.5 transfercase with a scx10 ii chassis with the toyzuki forward motor mount ?

 

[CyberFox]

Hi,


Is anybody could give the list of parts needed to complete this chassis when we don't have a SCX10.2, with reference of the parts ?


I would eventually be happy to use this chassis with CFX-W axles I have ;-)

 

[CyberFox]

Hi,


Is anybody could give the list of parts needed to complete this chassis when we don't have a SCX10.2, with reference of the parts ?


I would eventually be happy to use this chassis with CFX-W axles I have ;-)

Nobody ? :|
Toyzuki, if you come here ? :mrgreen:

 

[Johan_Eriksson]

Best place for answers is probably the Facebook group. Ben moron and a lot of other toyzuki guys hang there including me.


Skickat från min iPhone med Tapatalk