I don't think any of the hex'es are stripped, iirc. The ESC'S and radios functioned during their last use. However, ESCs, they don't have lipo cutoffs (older models). The 14.4 EVX esc's can be jumped and run on 7.4v. All blue esc is a boat esc good for 7.2v no other specs that i remember.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
The BHSN Crawler Club Fleet
- Thread starter VoltSCX
- Start date
VoltSCX
Pebble Pounder
Oh that's awesome! I've got about $80 ready to go, so I guess however much of it that would get. Do you have any ideas of how much it'd be to ship it all? (I wouldn't know, I've not had this much stuff shipped in a long time.)
(Quick update on the club btw while I'm here: I'll be talking to both the engineering teacher and small engines teacher this week to see if they're up for it. Hopefully somebody will say yes.)
VoltSCX
Pebble Pounder
Alrighty. I'll go do that now, hold on.
VoltSCX
Pebble Pounder
New update on the sponsor thingy: I might have found a potential sponsor, just waiting to see if he has time. He seemed fairly excited about it though, so I might have a chance.
VoltSCX
Pebble Pounder
Made a fun little storage thingy for some of the trucks since they were just lying on the floor in my closet
VoltSCX
Pebble Pounder
Got the rest of the trucks hung up and off of the floor. Actually looks half decent imo, might continue with this for whatever trucks I get next.
hnoroian
Quarry Creeper
Wish I could keep some of my trucks in my bedroom closet… my wife wouldn’t be too happy with that.
RudyF6
Pebble Pounder
Bedroom closet?
Hell, I'm running out of room for 1:1's in the garage!!
Hell, I'm running out of room for 1:1's in the garage!!
VoltSCX
Pebble Pounder
I mean... better than keeping them on the floor lol
lizard lips
Newbie
Super cool idea to get some kids interested
VoltSCX
Pebble Pounder
He didn't have time, back to the search. I'm gonna throw up a couple posters and hope the right person sees them.
VoltSCX
Pebble Pounder
Went and put up a bunch of posters around the building, gonna put up some more tomorrow. Hopefully the right person sees one of them.
Funny to think that in the rcc community, there would prob be dozens anxious to assist lol. Really hope that someone will get involved.
VoltSCX
Pebble Pounder
Lol, yeah. Hopefully I can get a teacher interested in it, (that has time), would be nice. I've already got a bunch of kids interested in it, so I know it'll be somewhat successful as a club. I mean, why wouldn't someone sign up to drive a bunch of tiny trucks under the guise/excuse of a school club? Lmao
I would think a physics or science prof or somebody that does engineering or mechanics.
VoltSCX
Pebble Pounder
VoltSCX
Pebble Pounder
Out with the old, and in with the... old. Lol, threw an AE-1 in here (truck #9) after the Novak Crawler ESC that was in it burned up. Turns out the AE-1 was shot too (shocker). Tossed in an AE-2 that came on my Ridgecrest that I'd had an EC3 connector soldered onto at Singer Hobbies and couple weeks ago. Works great!
hnoroian
Quarry Creeper
PE teacher- involves hiking, coordination, endurance, etc… too bad I’m about 2,100 miles away.
VoltSCX
Pebble Pounder
Cleaned up the body of truck #9 (now #1 according to the duct tape sticker that was under the #9), lookin pretty alright for an over 15 year old rental crawler.
I also added a much more discreet way to label the trucks (also easier to remove). Just a piece of electrical tape underneath the back end of the body with some Sharpie on it. Should hold up fine. Did the same thing on the tx on the battery door.
I also added a much more discreet way to label the trucks (also easier to remove). Just a piece of electrical tape underneath the back end of the body with some Sharpie on it. Should hold up fine. Did the same thing on the tx on the battery door.
