Tamiya CR-01 Picture Archive - No talking

[SullivanL]

Hong Kong - Tamiya CR01

I have some RC4WD alloy wheels and Tamiya carbon decks, but too lazy to install them now! All alloy except axels, I like the black against silver. Junfac skids and 90mm shocks - much better than stock setup, very stable and can handle jumps easily. Speed 11t brushless motor with stock pinion, great crawling power, and enough speed to have fun on a trail.

 

[tiptroniic]

my cr-01

removed canti's
repositioned battery
everything else stock!
Great Kit

 

[champ7times]

 

[85sfarunner]

Finally some decent shots....
Novak Rooster Crawler
Venom 5000Mah 8.4 hump pack
Integy 55T Lathe motor
Hitec HS-645MG
Chopped body
Running rear springs up front w/ light duty internal springs in shocks
Proline M2 Flat Irons on Junfac beadlocks w/ mem foam @ 6 oz of weight each
Everythings waterproofed
Weighs a good 10-12 pds

Future plans: Snorkel, winch, lights, etc..

 

[Alexridesabike]

this is my first rock crawler and i love it

-stock can
-novak XRS speed control
-JR Z590M servo
-JR radio and reciever
-venom batterypack

future plans
- new battery
-4 wheel steering

 

[NoBrainer]

Castel Creations Sidewinder Sport ESC.
HiTec HS-965MG (4WS)
High Clearance linkage.
Oil dampers and cantilever, soft stabalizer in back and nothing in front
Mashers 2000 M3 or Rock Lizard
Weight in wheels

Mine before too much modifications...

Now I don't have this...

Castel Creations Sidewinder Sport ESC.
HiTec HS-965MG (4WS)
shorter links
110mm oil dampers, no cantilever
Mashers 2000 M3 or Rock Lizard
Weight in wheels
145 mm flex...

Done som major changes...

Castel Creations Sidewinder Sport ESC.
HiTec HS-965MG (4WS)
shorter links
100mm oil dampers, no cantilever in droop setup
Proline Flat Iron M3 tires
Proline Eight Shooter rims
Weight in wheels

it just got so much better riding hight. Love this new setup, but I don't know how well it performs.

 

[Bok]

Early christmas gift from my girl It's my first crawler and i'm loving it! "thumbsup"

stock silver can
Futaba MC230CR esc
Associated S2008MG servo
Tamiya barrel springs (medium front, soft rear)
Tamiya TT01 aluminum motor heat sink
JIA rear mod

Light kit arriving this week! Next mod would probably be a higher turn motor. This thing is just so much fun

 

[grumppee]

Spektrum
Novak Rooster Crawler
Novak 55T
HiTec 645MG
Proline Flat Irons
Proline Scale Accessories
Tamiya Hop-Ups (Misc.)
DupliColor Bedliner

 

[redneck909]

my cr-01 is all stock with a tq3 raido system and a rooster crawler esc ... . other then that the body has jest got started it was too fun to drive around the house while it was too cold outside....

 

[vdubman]

MY Tower Hobbies cheapy CR-01 only $200 shipped to my door it took a couple days but its done for now i see its going to need some mods "thumbsup".

 

[redneck909]

my poser pic

 

[matador]

My toyota Fj40 and my Hilux.

 

[nider]

My CR-01 : )

CR 'Black Betty' 01 : )

 

[kroocer]

MY CR_01 with proline ambush CGR body

most is stock i have short springs and a 55t motor with a novak esc

 

[carlos46]

My NEW front bumper of Yota. It's almost same as original from 1970

 

[PumpkinPie]

Novak Rooster & 55T motor
4 wheel steering
Moab's on HR Axial rims painted black

 

[redneck909]

LOOK MOM NO SWAY BARS!!!!!!!!!!:lol:

 

[joeling]

CR-01 from Malaysia

Hi,

Here's mine :

Regards,
Joe Ling

 

[vtt]

Here's mine

 

[fatwoul]