Tamiya CR-01 Picture Archive - No talking

[StigAre]

Here's a couple pics of my Cr-01.
It is still stock, but new shocks is on the way.

Stock Motor
Tamiya ESC
24kg HitecServo in front and
12kg Futaba servo in rear.
JunFac 2.2 Beadlock wheels.
Proline Moab 2.2 tires

 

[Michael Staab]

Hi,

new Body on my CR-01: Proline Dodge RAM

Hi,

Greetings,

Michael

 

[nakata]

 

[Unimog]

The one I intend to buy second hand. Dont know about the setup yet:

 

[crawlski]

 

[sikid_01]

TAMIYA CR01
Stock Tamiya silver can motor
LRP runner ESC
SANWA 2.4 ghz radio
18t pinion
Stock gear box
Stock diffs
16kg Castor Servo
XSpede Drive shafts (not good)
Stock Tamiya leaky shocks
removed cantilevers
extended wheelbase with Long Arm Mod front
Stock chassis and side plates
JUNFAC Stright axle adapters rear
JUNFAC H/D steering Arms
JUNFAC front diff skid
HR Alloy beadlock rims (narrow)
GMADE 2.2 BigHorn crawler tyres (sweet as)
Tamiya 12mm alloy hex drives

 

[hbc865]

here it is

[/IMG]

[/IMG]

 

[TEAMTWITCH]

Here is a few shots of mine, sorry bout the quality of the last few pics they are from a phone camera...

stock suspension (cantilevers removed)
novak crawler 21.5t brusless motor
waterproof ESC
4200 6 cell batt pack
HPI savage Defender shell



Old pics,

Turned into a ute,

Now with HPI defender body,

 

[madf1man]

Unimoog action

Here's a few of mine. Just built. All stock accept stabilzers removed and steering knuckles dremeled a little for more turn radius . Mamba maxx with a 55t brushed motor. CC bec w/airtronics servo. Body is cool but I'll replace it soon with something more scale looking.

 

[carlos46]

This's mine Yota





more pictures here... http://www.carlos46.webnode.cz/cr-01-toyota-land-cruiser-40-tamiya/

 

[Gundy]

my CR01

stocker.
This is the beater body. The scale body is still in process.
The AX10 with a bushwacker is along side. ;-)

 

[madf1man]

UniMoog had to go.

Had this body sittin around for years. Favorite colors it came in way back when. New tires also, much better than kit.

 

[dezmoon]

 

[MannU]

Here's a new one from France.

Let's go for a ride!









Links, bumpers are hand made, still many thinks to do!

 

[loanpro]

 

[davelowe]

My CR-01

Here are a couple of pics of my CR-01 fresh off the building table.
Running a Novak 55T motor with rooster crawler esc , Hobbico digital CS 170 servo steering the RC4WD Super swampers on Junfac rims, Custom rear tire mount and trailer hitch, full set or RAM running lights.(also first paint job kinda crappy but good for bashin')

 

[loanpro]

@ loanpro

Those are some very nice pictures,the quality of them is topnotch

Thanks...used a Canon 40D, 70-300 f4 and 28-135 f3.5 kit lens.

Used a 50mm 1.4 lens on this pic..

 

[TrickyNickro]

Before:

After:

No front torsion bar, xspede wheel wideners, barrel springs, 16 tooth pinion. The rest is stock. Here's the inside:

 

[ilanB]

And thats my Unimog.
Still stock.....for now

with Novak 55T and Rooster Crawler combo
6 oz of weights in the front wheels.

On the plan, new shocks and Panther Cougar tires and that should be enough for our scale driving.

 

[TwistedXT]

my 1.9 cr01
805bb winch
cut stock springs
hpi rubicon body
1.9 rock crushers on hummer wheels

still in the works