Tamiya CR-01 Picture Archive - No talking

[elaz]

My CR01

Hi guys,
Just wanna share my CR01
Specs
Super rooster
Reedy 23T
S3003
Associated (T-Maxx shocks)

Replaced the stock 2 in 1 cantiliver shock/torsion bar links with a conventional shock and torsion bar for more scale look.

flex shot

More pics here
http://s36.photobucket.com/albums/e38/elaz_15/Toys/RC/CRO1/

 

[MonsterDDT]

First crawl

 

[John74]

The only pic i have of my CR-01 taken at the UK Crawlers Nats a few weeks ago.

Running goat brushless system and a cheap bluebird servo and weights in the wheels and a tekin 3400 lipo that gives silly amounts of run time.

 

[Michael Staab]

Hi,

crappy cell phone pic with new body:

and not so crappy cell phone pic with old Body:

Motor: Novak 55t with V4R+
Tires: Flat Iron M3

Greetings,

Michael

 

[SPECIAL ED]

Bronco body CR-01

Well I wanted somthing different so I went with the Bronco body.

Basic equipment
Crawler Rooster
Stock Can
Extended front links
Piggy back shocks, no cantlievers
Proline tread, stock rims

Thanks T for the body

.
Thanks DeanO for building it

. Just ask anyone about me building kits, I suck at it.. I have no patience for them..

On to the pics.

__________________

 

[bonesaw]

my cro1

This is my cro1.

Details:
bunch of extra metal
bunch of interior stuff
rooster esc
stock motor
custom shock mounts with STRC aluminum shocks
Tamiya hard and medium springs at each corner to counter act weight
RC4WD metal drive shafts
Vanquish revolver wheels with 3 weights per wheel

Check out more pics on my pseudo build post titled CR-01 Porn

 

[eben81]

eben81's norcal cr01

this is my cr01 i just finished the stickers

 

[minicracker]

here's my master plan so far.

1)llonger is better
2)i have no idea about that drink
3)more ideas to come"thumbsup"

 

[EL BARTO 1979]

You all know the body but here it is on a cr-01.
(the front bumper isn't finished and it needs details)
the wheelbase is shorter and the gearbox has moved more up front.

 

[chairman77]

Finally done with my CR01

The stock land cruiser shell is too pretty to mess up, so my first experience with airbrushing was on this Ford 72 shell.

Next on the to-do list: LED lights.

 

[mtnhrdgr2]

Stock Cr-01 with 4WS and no cantilevers
ESC: Traxxas XL-1
Servos: Futaba S3003
Radio: TQ3
Use: mainly bashing and trailing but the occassional crawling

once i learn to drive better i will upgrade the two servos, esc and motor...not sure which ones yet.
i already have a DX6 and receiver (not installed yet)

 

[860Crawler]

Here's mine.

Novak Rooster Crawler ESC
Hitec HS-645MG servo
Spektrum DX3.0 Tx/Rx

everything else stock

Its seen plenty of outdoors so far so it doesn't look as shiny now. I never take my camera out when I'm using this because I'm having too much fun

 

[StarOne]

On the Rocks

Here is my CR01 on some rocks.

Tekin FXR
Tekin 55t motor (Warrior 35t on the way)
3s Lipo Bat.
Losi Rock Claws

 

[jadama]

my 1st rig:

novak rooster esc and 55 motor
futaba s3305 servo (changing to hitec)
2 ch futaba radio
alum parts from rc4wd
rock crusher tires

 

[Vtown Crawl]

Finally I join RCC. Here's my Rig.

Specs
CR01 Chassis
Novak Goat with Brushless
Spektrum Dx3r
HPI Body (Defender 90)
Losi Rock Crawler Tires
4" Losi Crawler Shocks
Traxxas Punisher Shaft
HR 2.2 Alum Rims w/weights
LED Kit(FJ40 only)
Hardened Wheel spindals
Lipo Battery (Not Yet)
Dig System (Not Yet)

 

[srcars]

Few Updated Pics of mine

 

[kiko276]

hello friend

My CR-01
engineHPI 27T

 

[sandblaster87]

heres some updated pix.

 

[lowslowTJ]

 

[Spec-R]

Simple CR01 with some mod

Hi , This is my second crawler....
Yeah racing 3200 lipo
Futaba 3pk with spectrum
Hitec HT645MG servo
Novak Goat....with standard motor:-( still waiting for brushless motor anyone want to sell theirs novak 18.5 motor?
Tamiya Alum side Frame
Tamiya Alum servo mounting plate
3 racing alum cantiliver
Rest is stock......"thumbsup"

more pics on"My Ride Simple CR01"