SCX10 Picture Archive - No talking

[pardonmyn00b]

 

[xigtc]

Plain and simple!

 

[Locked Up]

"Trail Ready" H2

Electrical
Castle Creations Sidewinder
Castle Creations BEC @6.6v
Nomadio React
Spektrum SR3500
Hobbico CS-170 (steering)
Rhino 1750mah 3s Lipos
3 racing winch & controller
Electronics waterproofed
Custom LEDs

Drivetrain
Axial 55t Motor
87t spur & 13t pinion
Alloy transmission gears
Axial Under/Over Gears
Bonus Line chromoly lockers
Axial aluminum c's & knuckles
Axial CVD axle shafts
Axial straight axle adapters
Axial straight axle shafts
Stock driveshafts

Body & Chassis
Radio Shack H2 Body
Full interior
SCX10 Chassis

Suspension & Steering
Hand Brothers front 3 link (modified)
Custom servo plate
SCX10 shocks with HPI Shafts (front)
SCX10 shocks (rear)

Rims & Tires
SCX10 1.9 wheels
Custom "TR" Beadlock rings
Proline 1.9 Flatirons

Build thread:
http://www.rccrawler.com/forum/showthread.php?t=201312

Website with lots of pics & video:
http://www.noeither.com/rc/indexscx10.php

 

[lwarc]

Another SCX10 Yota

 

[jinspade]

night crawling

 

[Nate08]

Here's my scx10 Blazer:

 

[2500hdon37s]

this is my friends truck and he wanted me to post up some pics
27t motor
tazer 15t esc
stock tires with stock wheels painted
futaba radio
hi-tec 645 servo
4600mah 6 cell
hpi defender body painted neon green

 

[DonsATV]

Here's my stock SCX-10

Competition Orange
XL-5 esc
Atomic 60t

The current in the rapids up stream got a hold of it and washed it down to where it is in the last pic.

Hope to have a camcorder soon so I can get some vids of it in action, mishaps and all. "thumbsup"

 

[tman215644]

heres my scx10 all stock for now

 

[JOTE]

My Axial SCX10 Suzuki Samurai, Chile.-

My SCX, brushless, Gmade Zero, Chisel, and more...










Thanks

 

[ae racer]

heres pics of mine...second stock body for now while i finish up the clod...hope to get more scratches on it this wed..."thumbsup"

cheap brushless system ($60)
-http://www.hobbypartz.com/35a-brushless-esc-for-1-10-car.html
chassis mounted 645mg servo
3 cell lipo from china Mystery brand i believe
body painted pactra bright red on the outside and indy silver on the inside
will have tube bumpers and 3 racing winch wwhen the clod is done

 

[SAL45]

Here is my updated SCX. Added front bumper, rock rails, and rack. Also did the wrap using the DIY method.

 

[carver88]

 

[Oogie]

8)

 

[voytec9000]

A few pictures of my SCX10

Model: SCX10, Novak Goat Crawler 18,5T, Hi Torque JR servo, Tenergy LiPo 2S 5000mAh, HPI Defender body with "a bit" of custom work.

More about this model at:
http://rc-trial.ayz.pl/phpBB/viewtopic.php?t=3930

 

[sandblaster87]

 

[dezslash]

Heres my TR running a tazer esc and 60t.
frame mounted servo
4 link
Reign CB antenna
build thread http://www.rccrawler.com/forum/showthread.php?t=211400

 

[canadianbacon]

Here's my TR, still all stock, only thing I've done so far is take the rubber limiters off the shock shafts and taken the fender flares off to let the suspension work better since the flares were rubbing the tires when flexed.

 

[Smokermike]

SCX10 Blazer

Iv had this truck for almost a year an couldnt really decide on a body so I went with the Blazer body

IMG]http://i902.photobucket.com/albums/ac226/smokermike/blazer024.jpg[/IMG]

I dig it "thumbsup"

 

[ebbet]

Cf 100 scx10 tr

Painted with Pactra Racing Red on the outside. A very light coat of orange, red then black on the inside. Creates a rust look when outside is scraped or scratched. Spectrum 2.0 radio and Rx. White Axial 1.9's with Flat Irons.