New SSD SCX10 axle housings

[spoo76]

I asked that a while back. Didn't get a reply, but they should

 

[alpine4x4]

I asked that a while back. Didn't get a reply, but they should

I saw your post and no answer so I asked again:ror:

Really digging these for my Class 1 comp build and I just so happened to pickup a set of S300's today! Hopefully the housing/chubs/knucks work with them!

 

[spoo76]

Lucky score. They haven't been around for a while

 

[alpine4x4]

Lucky score. They haven't been around for a while

For sure. I've been keeping an eye out for a set. Nice beefy stock width axle to stay C1 legal"thumbsup" Be interesting to compare this setup to my C2 narrow XR modded rig in terms of steering.

 

[wsmb]

Any word on beef tubes for the d60's??

 

[SSD]

Any word on beef tubes for the d60's??

Brass tubes soon...

 

[eunique]

Brass tubes soon...

Any beeftubes available for the XRmod width for the SSD axles?

from my OnePlus Two

 

[wsmb]

Will the vanquish bearing caps work in the d60 axles?

 

[SSD]

Will the vanquish bearing caps work in the d60 axles?

No. They are for completely different axles.

 

[wsmb]

No. They are for completely different axles.

Thank you sir, nice to have good service easily accessible on the forums. Glad I went with ur axles. But everyone loves u guys and everything is always sold out. Lolll more bearing caps please!! "thumbsup" and some lockouts and brass tubes!

 

[fr8cture]

I must say these axles and bumper look great together. I got a question though as you can see I modified the truss to have the Panhard mounted lower. Sent chance of making a truss for more Panhard clearance? Preferably in aluminum?

 

[Natedog]

Looks good. Make your own S-bent panhard rod and use the upper stock mount hole on axle?

 

[fr8cture]

I don't have the tools to bend accurately. I tried it once but the rod broke. Lol

Sent from my VS986 using Tapatalk

 

[Natedog]

Yes, it can be difficult, time consuming and sometimes almost impossible to get it bent just right to clear everything. That's one more reason why Axial needs to re-work this chassis to clear high-steer.

 

[roksloski]

Yes, it can be difficult, time consuming and sometimes almost impossible to get it bent just right to clear everything. That's one more reason why Axial needs to re-work this chassis to clear high-steer.

mine works just fine with VP 8deg knuckles and C's........
everything clears and shocks bottom out on the rubber stops before anything else touches........"thumbsup""thumbsup"

 

[fr8cture]

I got a question though as you can see I modified the truss to have the Panhard mounted lower. Sent chance of making a truss for more Panhard clearance? Preferably in aluminum?

Guess that's a no. :ror:

 

[SSD]

Guess that's a no. :ror:

Didn't see your question before...
No not much chance of a new lower panhard mount.

 

[fr8cture]

I figured bummer.

Sent from my VS986 using Tapatalk

 

[Bananaclip]

We need parts!!!!!!!!:mrgreen:

 

[SSD]

it takes time, working on it as always...