New SSD SCX10 axle housings

[Shinjari]

No, they are just for scale appearance. There is not really enough meat there for thread and the bearing and wheel would get in the way anyway.

Thought that might be the case. Thanks for the info "thumbsup"

So these new knuckles have a slight ackerman? At least less than stock? Or am I mistaken?

 

[SSD]

Product pages are now up:

Pro Aluminum C Hubs for SCX10 (Grey)

Pro Aluminum Knuckles for SCX10 (Grey)

 

[17dean]

Great looking c hubs and knuckles. How much turning angle is possible?

 

[fr8cture]

Ordered a set of housings last night. Would have liked to went through RPP but they sold out so went TCS.

 

[rustneversleeps]

Product pages are now up:

Pro Aluminum C Hubs for SCX10 (Grey)

Pro Aluminum Knuckles for SCX10 (Grey)

With knuckles and chubs would we get the same turning radius as the Wraith...

 

[Bananaclip]

Looks like we will get a fair amount of caster from this set up!!!! I love that the double sheer lower arm is above the bearing!!!! True highsteer double sheer super scale knuckles.....The combo should be in my hands tomorrow8)

 

[SSD]

Great looking c hubs and knuckles. How much turning angle is possible?

With knuckles and chubs would we get the same turning radius as the Wraith...

58 degrees each way.

 

[demonoid369]

So what's the measurement from bottom to top of the center section of the d60? Trying to get an idea of what size scale the axle could or would be. Are the axle tubes removable? And are they made like a high pinion or low pinion version of the d60?


Sent from my iPhone using Tapatal

 

[aztitan]

Tubes are not removable

 

[rockspider]

@ Demonoid

It's not possible to make a high pinion with stock axial r&p, it's a centered pinion design.

 

[honchojoe]

Like this do you mean? It's from a chinese scx10 type clone called a HG P402 or the 6x6 version is P601.

 

[rockspider]

58 degrees each way.

That is with the cvd in the pictures? Which one are they? Your own?
Looks like the cross pin size has been bumped up quite a bit! "thumbsup"

 

[steven318is]

something like that would be bad ass if it was made in alloy and with a smaller lower gear

 

[honchojoe]

something like that would be bad ass if it was made in alloy and with a smaller lower gear

Like this one lol. Well alloy anyway. Gears are the same.

 

[SSD]

That is with the cvd in the pictures? Which one are they? Your own?
Looks like the cross pin size has been bumped up quite a bit! "thumbsup"

8)

The 58 degrees is the maximum steering of the knuckle. I'm pretty sure tires will start to touch links before the knuckles max out anyway.

 

[Bananaclip]

8)

The 58 degrees is the maximum steering of the knuckle. I'm pretty sure tires will start to touch links before the knuckles max out anyway.

Just release your entire Arsenal so I can get my build done:mrgreen: received my knuckles, chubs, bearing caps, and steering last evening. Will be posting pics later today. The quality is amazing. Kudo's on these amazing knuckles. Oh my:mrgreen:

 

[rustneversleeps]

58 degrees each way.

Great.
Will there be any plastic one in the works, like the same material you use for the scx10 Axle housing....Aluminum ones are nice,but the plastic ones would be cheaper.."thumbsup"

 

[fr8cture]

Plastic wouldn't be worth the trouble for knuckles and chubs. Too high stress they would break I would think.

Sent from my VS986 using Tapatalk

 

[roksloski]

That is with the cvd in the pictures? Which one are they? Your own?
Looks like the cross pin size has been bumped up quite a bit! "thumbsup"

Big cross pin, could mean troubble........
Bigger is not always better.......:shock:"thumbsup"

 

[fr8cture]

I'm curious on the 58* xr mod doesn't even get that..

Sent from my VS986 using Tapatalk