Thanks ! "thumbsup"
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
My 2013 Losi Sporty
- Thread starter JENS
- Start date
Thanks ! "thumbsup"
Got to give the JENS mod a thumbs up. Even with a 16t pinion (which I was thinking was too large) I had way more speed and low end than anyone else at the comp today with only a 17.5 and 3s. And there were some high zoot, top of the line stuff being run. I also got in some binds that made people cringe, powered though like a champ.
It ran great, I didn't on the other hand.
It ran great, I didn't on the other hand.
Last edited:
braune
Quarry Creeper
Hi JENS,
good luck at the Nordics"thumbsup"
Nice to see a Parma on your crawler, too:mrgreen:
Can you please take a pic of your skidplate of the Suckerpunch?
Regards,
Jeffrey
good luck at the Nordics"thumbsup"
Nice to see a Parma on your crawler, too:mrgreen:
Can you please take a pic of your skidplate of the Suckerpunch?
Regards,
Jeffrey
braune
Quarry Creeper
Thanks "thumbsup"
Skidplate :
Thanks "thumbsup"
.
Thanks for the picture
Gesendet von meinem GT-S5570 mit Tapatalk 2
After Nordics I will give this motor a try ;-):
Team Brood Axle Buster 25t 8)
.
Interested to hear your take on that motor. With the tranny mod I am thinking or trying out a brushed motor since our season is over.
Well,-back from Nordics i Finland Really nice location,people and courses "thumbsup"
The Losi drove very good,-but the driver did not ;-)
First two courses went well with a -30 and a -29 score (Ten gates and two -5 bonus-gates per course)
Course four a not so bad -19 ,-but course three a hit and miss -3 score....;-)
Managed to get to the final,-but messed up and ended ninth...,-a bit disappointet,-but stupid driving and not going for bonus-gates (which were -10 in the finals) is not the way to do it :| Only my self to blame !
But it was a very nice trip to Finland with great company from Norway,meeting a lot of skilled european drivers and just having a great time "thumbsup""thumbsup"
Really nice location,people and courses "thumbsup"The Losi drove very good,-but the driver did not ;-)
First two courses went well with a -30 and a -29 score
(Ten gates and two -5 bonus-gates per course)Course four a not so bad -19 ,-but course three a hit and miss -3 score....;-)
Managed to get to the final,-but messed up and ended ninth...,-a bit disappointet,-but stupid driving and not going for bonus-gates (which were -10 in the finals) is not the way to do it :| Only my self to blame !
But it was a very nice trip to Finland with great company from Norway,meeting a lot of skilled european drivers and just having a great time "thumbsup""thumbsup"
braune
Quarry Creeper
Well,-back from Nordics i Finland
The Losi drove very good,-but the driver did not ;-)
First two courses went well with a -30 and a -29 score
Course four a not so bad -19 ,-but course three a hit and miss -3 score....;-)
Managed to get to the final,-but messed up and ended ninth...,-a bit disappointet,-but stupid driving and not going for bonus-gates (which were -10 in the finals) is not the way to do it :| Only my self to blame !
But it was a very nice trip to Finland with great company from Norway,meeting a lot of skilled european drivers and just having a great time "thumbsup""thumbsup"
Congrats to 9th placement"thumbsup""thumbsup"
You did the same mistake as I did at SC, I wasn't driving ALL the bonuse gates
Congrats to 9th placement"thumbsup""thumbsup"
You did the same mistake as I did at SC, I wasn't driving ALL the bonuse gates
Thanks ! "thumbsup"
.
Yes it is heavy,-but if it is as good as I think,-it will be worth the extra weight
Thinking about using the Holmes BR Mini,-hoping it will handle the current....
I'm using the BR Mini AND 4S. For maybe a year (ish) now. Be sure to turn off the dragbrake and Holmes Hold. Check status on software. It doesn't always ship with latest. You update and do all your programing with a Castle Link. And remember it has no useful BEC. I lash mine down on an open cantilevered tongue between the front links to get maximum cooling. No tape, sleeving or shrink wrap/tubing for me.
Yes it is heavy,-but if it is as good as I think,-it will be worth the extra weight
Thinking about using the Holmes BR Mini,-hoping it will handle the current....
That really surprises me about the weight. Is that just motor vs motor, or is that overall weight (with extra wires and larger sensored ESC for brushless)?
Great job at Nordics.
