That's kinda cute. Has anyone been using those drive shafts long enough to get a feel for durability? Anyone know what the universal pivot pin diameters are? Is the main shaft 5mm? If so, might be able to drop in 3/16" Grade-5 Ti which is cheap and easy to come by over here.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
My 2013 Losi Sporty
- Thread starter JENS
- Start date
That's kinda cute. Has anyone been using those drive shafts long enough to get a feel for durability? Anyone know what the universal pivot pin diameters are? Is the main shaft 5mm? If so, might be able to drop in 3/16" Grade-5 Ti which is cheap and easy to come by over here.
pajey
RCC Addict
I've seen some of the ax10 guys running them. Will be interesting to see how they hold up.
Fantastic work jens"thumbsup" I was beginning to wonder what you did with the Sucker punch and I never really venture into this section. The chassis looks right at home with those axles and trans mounted to it.
Super clean build and I hope it all works out well for you.
Super clean build and I hope it all works out well for you.
Thanks "thumbsup"
I like this chassis very much,-really looking forward to the upcoming season 8)
waggaclint
Quarry Creeper
Looking good JENS"thumbsup" so are the SDI shafts adjustable on length?
Thanks "thumbsup"
You have to cut them to your wanted length and file a new flat spot for the set screw.
anuthabubba
Quarry Creeper
Sexy!
braune
Quarry Creeper
Awesome"thumbsup" Really good job
Will you come to SuperCrawl 2014?
Best regards
Jeffrey
Will you come to SuperCrawl 2014?
Best regards
Jeffrey
Awesome"thumbsup" Really good job
Will you come to SuperCrawl 2014?
Best regards
Jeffrey
Thanks"thumbsup"
Sorry,-no SuperCrawl for me this year,-just Spanish Nationals and Nordics in Finland
douwe
Rock Crawler
Thanks"thumbsup"
Sorry,-no SuperCrawl for me this year,-just Spanish Nationals and Nordics in Finland
Good luck in Spain...
Also no Supercrawl for me... Also going to the nordics..
Think they are a bit to close to each other...
braune
Quarry Creeper
Just a short question... Which servohorn are you using? :ror:Need to find a new one...
Jeffrey
Jeffrey
Just a short question... Which servohorn are you using? :ror:Need to find a new one...
Jeffrey
Hitec Machined Aluminum Double Sided Servo Horn (Blue) [HRC55702] | Radios & Accessories - A Main Hobbies
braune
Quarry Creeper
Thanks!:thumbup:
Jeffrey
Sent with my GT-S5570 using Tapatalk 2
Last edited:
I have always liked the clamping style better. A little heavier, but much stronger.
I have used the cheapies to the expensive clamping style. I have had good experience with both.
Robitronic is top notch.
Robitronic Aluminum Servo Arm 24 tooth spline (Hitec) (Short) Red #R17021R - The Crawlers Store LLC
Pretty sure this is what I have on there now.
https://www.hobbyking.com/hobbyking/store/__17514__CNC_Alloy_Servo_Arm_Short_HITEC_.html
braune
Quarry Creeper
Well, I bought some Clamping style again, if it won't work again, I'll buy one like Jens his;-)
But I have to tell that my old clamping one was a cheap one for just 3€:x
90Finder
Quarry Creeper
Mounted some Blue Monkey knuckle-weights and did a test-run today.
Really great to have that much steering and the caster-angle did work well also "thumbsup"
Which knuckle weights are those from blue monkey? I didnt think theirs would work with the Vanquish knuckles.
