• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Hacked up Newbright TJ (first rig and post!)

53Guy said:
The best way I can describe it is like a bellcrank for buggies or stadium trucks. You could find one or make one with a 1" or .75" lower arm, 90* offset with a larger upper arm than lower to give you better leverage. Here's a few pictures from my XB8. It's beefy and doesn't need to be this crazy but you'll get the idea.
Click to expand...

hmmm... seems like a lot of fandanglin around. i'll have to come up with something. could i buy the bell crank itself and somehow rig it into the frame? just seems like a lot of work. the only cutting tool i own is a dremel. ALL of my fabrications are done with a dremel in my apartment. hahaha... same with brazing :(
 
Ya, that's what I was getting at. You could fab up a way to mount the bellcrank to the frame or make up something similar on your own. Well, it sounds like I've got a leg up in the manufacturing business....I've got a dewalt drill to add to your dremel and brazing equipment. Hahahaha!
 
53Guy said:
Ya, that's what I was getting at. You could fab up a way to mount the bellcrank to the frame or make up something similar on your own. Well, it sounds like I've got a leg up in the manufacturing business....I've got a dewalt drill to add to your dremel and brazing equipment. Hahahaha!
Click to expand...

woah now, i have a black and decker drill and jigsaw... but the jigsaw just gets outta hand, lol.... thanks for the tips and info though!
 
99% done!

Alright. Built rear wheel wells and bed out of 1/8" black plastic.


_DSC0063 by saltinemadness, on Flickr


_DSC0066 by saltinemadness, on Flickr


_DSC0069 by saltinemadness, on Flickr


_DSC0070 by saltinemadness, on Flickr

Began to mock up the cage...


_DSC0071vibsat by saltinemadness, on Flickr

Sorry I don't have pictures of me actually brazing it, but it's DONE. Sanded, primed and Enameled.


_DSC0075vibsat by saltinemadness, on Flickr

Took some pictures with the cage installed...


_DSC0091 by saltinemadness, on Flickr


_DSC0094 by saltinemadness, on Flickr

Did I mention that I stretched the wheelbase as promised? It's around Cherokee wheelbase length now... Which I believe is the stock length. I also primed and painted the trusses, and painted the stock hubs. I wasn't feeling how tall it still sat, so I put the 110mm RC4WD scale shocks back on, only I flipped the springs in them. So now this thing is running a 100% droop suspension setup. I've never driven it like this, so we'll see what happens. AFTER I FINISH THE DANG STEERING ISSUE...:x


_DSC0107vibsat by saltinemadness, on Flickr

MORE POSER PICS until i get an ESC (HH BRXL) and figure the steering out.


_DSC0114vibsat by saltinemadness, on Flickr


_DSC0133vibsat by saltinemadness, on Flickr


_DSC0104vibsat by saltinemadness, on Flickr

Are you guys drooling as much as I am?
 
totally gnarly Jeep man! haha Love it.

Did you use the New Bright R/C Full Function 9.6v 1:10 Mud Slinger ?

Thanks
 
Awesome build! Love the cage work. I have this body just sitting around, but I might be inspired now "thumbsup"
 
Agreed. For me, this is the sweetest build in the entire SCX10 photos section. I've even stolen your pics for my desktop! I'll apologize now for completely plagiarizing your rig in the future.
 
Chubby5000 said:
Agreed. For me, this is the sweetest build in the entire SCX10 photos section. I've even stolen your pics for my desktop! I'll apologize now for completely plagiarizing your rig in the future.
Click to expand...

That's perfectly fine with me! It currently has wraith axles under it now. I'll post pics tomorrow when I get outside. I haven't decided if they're too wide or not. Also, I slipped in a 35t motor on 3s lipo... the thing is nuts!
 
-------------UPDATE-------------
P I C T U R E H E A V Y
------------------------------------------------------------------------------


SO after waiting forever for classes to stop, I FINALLY have a chance to tinker with my stuff.

And my TJ now has Wraith axles!!! It was running on a 35t motor with 3s on the axial AE-1 ESC but the steering was glitching due to the 5v BEC. So, because of my stupidity, it took me about 2 days to figure out what the dang problem was before I finally threw in the only other ESC i had—the traxxas xl-5. Along with the xl-5 I had (from a slash), I also had the 12t TITAN motor. So I figured, what the heck, I'll throw that in there too and see what happens.

Now the thing does donuts, backflips, wheelies... but doesn't crawl so well...


_DSC0113 by saltinemadness, on Flickr


_DSC0109 by saltinemadness, on Flickr


_DSC0108 by saltinemadness, on Flickr


_DSC0107 by saltinemadness, on Flickr


_DSC0106 by saltinemadness, on Flickr


_DSC0105 by saltinemadness, on Flickr


_DSC0076 by saltinemadness, on Flickr


_DSC0077 by saltinemadness, on Flickr


_DSC0079 by saltinemadness, on Flickr


_DSC0090 by saltinemadness, on Flickr


_DSC0095 by saltinemadness, on Flickr


_DSC0096 by saltinemadness, on Flickr


_DSC0097 by saltinemadness, on Flickr


_DSC0098 by saltinemadness, on Flickr

***POPPED A SHAFT***

_DSC0099 by saltinemadness, on Flickr

"SH*T, BRAKES! THERE'S A BUSH!"

_DSC0100 by saltinemadness, on Flickr

"I just killed a bush"

_DSC0101 by saltinemadness, on Flickr

"I think Denim Dan is stuck in a bush...could be worse ;-)"

_DSC0102 by saltinemadness, on Flickr

Well there's the problem...
"RECTUM!? DAMN NEAR KILLED EM!"

_DSC0104 by saltinemadness, on Flickr

Made a fuel cell from scratch...

_DSC0114 by saltinemadness, on Flickr

Remember that pesky 3 link & panhard setup I had earlier? Well now it's on my OTHER newbright TJ and it works perfectly because I wasn't an idiot this time and decided NOT to cut the front end of the chassis down.

_DSC0128 by saltinemadness, on Flickr

She's gonna be purty when I'm done. Going for a more scale look with fenders and what have you.

_DSC0122 by saltinemadness, on Flickr


_DSC0124 by saltinemadness, on Flickr


_DSC0125 by saltinemadness, on Flickr

Brazed cage, bumbers, etc... Gonna be a red-orange color... lots of lights.

Also, I'm working on my brother's blackfoot bodied, dove-nosed truggy. Still have yet to braze the cage and bumper up... bumper is going to be the same as my wraith TJ bumper and I need to upload a scan of my cage drawings to see what he thinks. But here's where it sits as of now.

_DSC0121 by saltinemadness, on Flickr

Sorry for the crappy pics. I'm gonna try to have video of my scx-10/wraith/TJ on here either later today or tomorrow. I just keep popping driveshafts, so I'm going to temporarily reinforce them with all thread until i do the revo or e/t maxx mod.

Thoughts?
 
You must log in or register to reply here.
Back
Top