XR10 Picture Archive

[AlphaQup]

parts used:
FXR x 2
Phantom Blitz 40 turn x 2
CC Bec @ 7.4v
Hitec 7950
DX6I, esc mix: elevator is rear, aileron is front mixed 100%, rudder is steering.
Axial 101mm bent link= Uppers
VP SLW2 - 225s up front, 350s out back, 2 wraps o led up front.
Losi gold springs in front, stock rear, i step higher front and rear, Jeepindoug spring cups.
body is slammed and creased around the skid.
Thunder power 45c, 850mah, 3 cell.

 

[R2theICKY]

Servo: Futaba S9157
Receiver: Spektrum S300
Transmitter: DX3E
Motor: Fantom 40T x 2
ESC: Tekin FX-R
Dig Switch: Punk RC
Battery: Hyperion 900 11.1v Lipo 45C
Tires: Hot Bodies Rovers - White Compound
Foams: Nova 5.5 Dual Stage
Body: Losi Grappler Pro (stock body is being painted by a buddy;-))
Wheel Weights: Vanquish
BEC: Castle Creations
Body Mounts: Gunnar Kit

 

[downhiller]

First experience with Skins from FREQESKINZ.com

<?xml:namespace prefix = o ns = "urn:schemas-microsoft-comfficeffice" /><o></o>
<o></o>

<o></o>
<o></o>

<o></o>
<o></o>
<o></o>

 

[BentKa]

XR10 T1E Rockshow Moonbuggy

Spec list:

Chassis: T1E Rockshow Moonbuggy V2
Axels: Axial XR10
Shocks: Losi 4" Crawler Shocks shortened with shorter damper housing and rod. Rod end modified.
Links: T1E High Clearance rear links + Crawler Innovations Low Clearance front links.
Motors: 2 x Holmes Hobbies Torquemaster 35T
Servo: Hitec HS-7980TH at 7.4V
ESC: 2 x Tekin FXR
BEC: Castle 10A
Radio: Futaba 4 PK
Batteries: 4 x Hyperion 3S 11mAh 45C G3 EX
Rims: 3 sets of 1" wide VP SLW V3 and 1 set VP DH ProComps
Tires: Losi Boss Claws Red, HB Sedona White, HB Rover White, HB Rover EX Pink
Foam: Nova 5.25" for Claws and Rover EX, Nova 5.5" for Sedona and Rover White
sKinz for Moonbuggy and radio from www.freqeskinz.com

Some pictures:

My XR10 T1E Rockshow Moonbuggy build thread


Bent

 

[winkscrawler]

Winkscrawler's XR10 in stock form

Axial XR10 (stock)
Motor: 2x Integy 45T
Servo: Hitec 7950
ESC: Tekin FXR
PunkDIG
Castle Creations BEC
HB Rovers white dot with Nova 5.5 dual stage foams
Hardline Body with my paint scheme plus some kit stickers
Lipo 3S 1000 Turnigy

This kit was fun to put together and the instructions were great. Now for the pics.

 

[thehopping1]

Same old stuff
Mamba Max with CC BEC
Holms 45t Non hand wounds
Punk Dig
White Rovers with Chisel mem foams on stock Rover foams
Bent links every where

I tried to match the color of the rings to the body and since I don't have my new 3 cell yet and am stuck with a 2 cell, I put stickers every where to make it faster.:mrgreen:

And hanging on a wall as a roller because I could

 

[mat]

Mambe Sidewinder
Power HD1501MG servo
2 x intergy 45t motors
Jconcepts Rocx

 

[kasper]

Dual tekin fxr
hitech 7950
futaba 4pk
Jph handwounds 35t

 

[SVEN]

At Nationals...

 

[klabeaume]

axial xr10
futaba 4pk
cc bec
cc dual sidewinders
jr8711 servo
vanquish slw 2
hb white rovers
nova foams
thunderpower 850 3s lipos
freqeskinz hardline body overlay
losi gold springs
axial/strc links

 

[motorman1600]

bug body axial

Just not thrilled with the looks of the stock body. So I put the old hpi bug body on it.

FXR pro
Punk dig
35 turn hand wound motors by Me.
Rovers
Some tweaking of the chassis and shock mounts

 

[Rokpile]

I got it on the rocks today (between rain drops) lot's of dialing in on the electronics,
trying to learn individual parameters with double speed controls on a three channel
seem to be challenging my knowledge (Grover may be getting a call on Monday)
As far as the crawler itself? It is as I expected with some awsome tracking,turning,handleing etc.
It just takes all the work out of setting up a crawler. My crawler is quieter than expected and smooth like butter.
I even went as far as throwing my own paint job on the body, and I just want to say
that I am getting better at painting these little things and really like this paint scheme. :mrgreen:
Here is my 5lbs.3.5oz. cralwer in comp form, I hope you like it and let me know what you think.
Thanks for reading my build thread and hope you get something out of it,
I have some new DH's pro wheels coming as well and loaded with:

dual Teking FXR's
Novak dig switch
Tekin 45t motors
Crawler Inovations foams
HB rovers (whites)
(as soon as released VP upgrades such as knuckles, Gears, etc.

and I actually had three done and running at once :applause:

 

[mjyjxj]

crowed pleaser

proline crowed pleaser body
tekin fxr
proline chisel tires
lunsford screws
punk dig
bill's 35 t on 2s

 

[T-buck]

Servo: JR 8711
Transmitter: DX3R
Motor: HH Pro 35x 2
ESC: Mamba Max
Dig Switch: Punk RC
Tires: Hot Bodies Rovers
BEC: Castle Creations

 

[paystin]

Fantom Blitz 45T motors
Holmes BR-XL ESC
CC BEC
HiTec7954SH servo
Punk Dig unit
Turnigy 1300 mah lipo
Vanquish DH Pro Comps/ VP SLW V1's rear
Machined bent links coming soon.

 

[Norris]

Mine, with NO problems so far...

 

[kalifkid]

axial-bee

 

[Rig Rocker]

It just keeps on amazing me and getting better with every tune

15 packs of hard runnin' and all gears are still perfect

Two Thumbs-Up Axial! "thumbsup" "thumbsup"​

Setup:

XR10 Comp Kit
Vanquish Products Dirty Harry Pro Comps
Futaba 4PKs
Dual FXR ESC
Brood Racing 45t LE
7955TG
Maxamps 1800 & 1290

 

[kgraham204]

204's xr

Hey guy's here's my setup
2x55t novaks
CC Sidewinder ESC
Punk Dig
hi tec 7955tg
and Losi Comp Claws
1st place at last comp

 

[junior ax10]

Here are a few poser pics of my rig just got done with the paint!! Hope ya like it :twisted: