First Wraith build, do you run a straight metal servo horn or use a servo saver at all? It looks like just a servo horn without any saver option. IS this correct? I am going to run a Savox 1256TG servo or maybe swap out my 5955 from my Savage flux.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Wraith Beginners Guide
- Thread starter Harley
- Start date
I don't run servo savers in anything. It's hard on servos but I like a solid feeling steering setup.
joss097
Rock Stacker
Did you plan to review the KIT as I'm trying to set my mind on which one to get, From what I've read, the driveshafts and lower link are upgraded and it get the R35 Ripsaw but anything else to help me choose.
New to R/C and what to put my money right the first time. If I buy a kit, I plan buying a holmes BR-XL esc and torquemaster pro 35T, hacked gt3b radio, need to find which servo to use.
really good thread!!!
New to R/C and what to put my money right the first time. If I buy a kit, I plan buying a holmes BR-XL esc and torquemaster pro 35T, hacked gt3b radio, need to find which servo to use.
really good thread!!!
For the most part this thread still applies. Except when talking about electronics just get whatever aftermarket stuff is suggested.
The driveshafts are the same but it gets universal joint axle shafts. The tires are upgrades to the R35's and it comes with black seats but no LED system.
Quick question cause I'm hoping to place an order tonight.
Are 2 of these, MIP C-Drive Spline AX10/Scorpion [08103] - $28.99 : CKRC Crawlers, RC Rock Crawlers, equal to this, MIP Spline Center CVD Wraith [11116] - $59.99 : CKRC Crawlers, RC Rock Crawlers?
Are 2 of these, MIP C-Drive Spline AX10/Scorpion [08103] - $28.99 : CKRC Crawlers, RC Rock Crawlers, equal to this, MIP Spline Center CVD Wraith [11116] - $59.99 : CKRC Crawlers, RC Rock Crawlers?
Stburr91
Quarry Creeper
They are not the same thing, but the one for the ax10 will work for the Wraith.
However, the one for the ax10 in the link above, is only one drive shaft. You'll need to order the full set.
Rig Rocker
I wanna be Dave
The end piece for the wraith kit is longer at trans side to clear gear cover. Other than that, identical. They sell just the longer ends too, so you could upgrade a set of ax10 mip's if you already have some.
BTW, the ax10 shaft will clear if you do not run the gear cover.
joelKID984
Quarry Creeper
heyy guys, i want to run 4WS on my wraith, so would i need a second external BEC?
Agama
Rock Crawler
Yes, you will need two, one for each servo.
If your servos are over 300 oz/in each then I would suggest two BEC's or one BEC pro. Otherwise one BEC will likely be fine.
joelKID984
Quarry Creeper
alright, thanks guys, i have never done rc wring before in my life, if i do the the 4WS, is the second wiring diagram relevant? cuz i only see one BEC
I run one BEC Pro, which is twice as powerful as a normal BEC. There are TONS of ways to wire things, I just throw a couple solutions up there.
joelKID984
Quarry Creeper
alright thanks harley. sounds like ill go with the CC BEC pro. if you can, can you post you a wiring solution for my rig. im gonna have maybe a winch and definetely 4WS. and im gonna buy the 4PL, so your vids will come in handy.
alright thanks harley. sounds like ill go with the CC BEC pro. if you can, can you post you a wiring solution for my rig. im gonna have maybe a winch and definetely 4WS. and im gonna buy the 4PL, so your vids will come in handy.
I'm not sure when I'll have time. I'll see what I can do. Those diagrams are a pain to make look good.
joelKID984
Quarry Creeper
seriously i couldn't care less bout the appearence. even if they electronics were just the top view(like a box) with the name in it. but when ever is easiest for you.
seriously i couldn't care less bout the appearence. even if they electronics were just the top view(like a box) with the name in it. but when ever is easiest for you.
I know what you mean but I don't like putting it out there unless it looks right.
Im half tempted to start a hate/do not buy strc products thread. I am still having fitment issues and they have ZERO customer support. They have NO phone number and the 2 emails i have sent are going on 2 weeks unanswered. I then googled "strc too short" and it turns out fitment is a comon issue. i dont want others to have my same troubles
Which strc pieces are giving you problems?
joelKID984
Quarry Creeper
does upgrading to larger shocks such as 124mm or 104mm, mean great articulation?
Similar threads
