Finally got mine today. Waited almost a month. They sent me a free "gift" of a cheap crappy screwdriver which arrived before my kit was even shipped. My box was munched pretty good but it all seems to be in one piece. Thinking about hitting the cab with some plastic model paint to make it unique. Gotta get my 3D printer going again for spare parts, after I fix an oil pan leak on the pickup to finish the motor swap. This kit might wait a couple weeks. Don't even have an ESC or receiver for it yet.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
WPL C14
- Thread starter Brake Weight
- Start date
Brake Weight
I wanna be Dave
Met with a setback using the small hardware. Ended up robbing some bolts out of a spare set of beadlocks to get the shocks mounted. The 1/18 Gelande shocks are short to be functional so now sourcing another set. Need to figure out something for upper link material. I need to round up a proper, yet cheap, mini servo also. Assuming the stocker doesn’t have enough ass to turn the wheels.
Brake Weight
I wanna be Dave
Shape_Shifter
Rock Crawler
Met with a setback using the small hardware. Ended up robbing some bolts out of a spare set of beadlocks to get the shocks mounted. The 1/18 Gelande shocks are short to be functional so now sourcing another set. Need to figure out something for upper link material. I need to round up a proper, yet cheap, mini servo also. Assuming the stocker doesn’t have enough ass to turn the wheels.
I dont recognize that transfer case. Is that a losi?
Brake Weight
I wanna be Dave
Not this vendor, but it’s the same Chinese transfercase. Apparently copied from the GCM one.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/222132095707
TooOldForThis
Rock Crawler
No wonder these things are so cheap, there's no rust-proofing at all. 8)
just got mine in yesterday. I got the rtr...no battery included though. the tires are really hard. I wish I had just ordered the kit since I'm going to try putting the slickrock drivetrain and electronics into it. I'm going to see if they'll refund me anything for the missing battery too.
stussy2870
Newbie
I just bit the bullet-- no idea why i do this to myself. Got the kit, 2s 1500mah lipo, 3channel radio/rec and 20a ESC for 54.94 @ Gearbest.. couldnt pass it up..
oops-- no battery..
ebayed a pair of batteries and now im all in for about 75.00.. Still thrilled at the cost..
Looks great.. - New to "scaling" rigs.. How did you get the body to deform? Small torch? and how about the rust treatment-- is that just paint? sorry for all the ?'s..
oops-- no battery..
ebayed a pair of batteries and now im all in for about 75.00.. Still thrilled at the cost..
No wonder these things are so cheap, there's no rust-proofing at all. 8)
Looks great.. - New to "scaling" rigs.. How did you get the body to deform? Small torch? and how about the rust treatment-- is that just paint? sorry for all the ?'s..
Last edited by a moderator:
TooOldForThis
Rock Crawler
Thanks. This was the first time I deformed a hardbody and a simple candle worked really well. For rust I use this kit (below) I got from a local hobby shop. Its cool because it uses metal powder which gives you actual rust. I also used several different types of paint to get it looking dirty. Weathering stuff is fun because there's no right way to do it and the only goal is for it to come out looking terrible "thumbsup"
Brake Weight
I wanna be Dave
Wpl c14
My hand fab chassis wasn’t working out for me. So I Dremeled off those tabs and used the original chassis plates.
I had cut the front half to tuck higher under the hood and over the fenderwells but I couldn’t bring myself to order some 60mm 1:10 scale shocks to maybe make it work.
1/18 Gelande shocks direct to frame.
Scored some 1.55 RC4WD beadlocks recently and I’m hoping they’ll mount to the Yeti Jr. tires. Now patiently waiting for my m2 die to arrive from China. Maybe next week, maybe next month. LOL. Cheap build is getting drawn out because I want the $2 China die and not the $20 Amazon Prime die.
Edit:
Forgot about the servo I found in my junk boxes. I think it’ll do OK.
My hand fab chassis wasn’t working out for me. So I Dremeled off those tabs and used the original chassis plates.
I had cut the front half to tuck higher under the hood and over the fenderwells but I couldn’t bring myself to order some 60mm 1:10 scale shocks to maybe make it work.
1/18 Gelande shocks direct to frame.
Scored some 1.55 RC4WD beadlocks recently and I’m hoping they’ll mount to the Yeti Jr. tires. Now patiently waiting for my m2 die to arrive from China. Maybe next week, maybe next month. LOL. Cheap build is getting drawn out because I want the $2 China die and not the $20 Amazon Prime die.
Edit:
Forgot about the servo I found in my junk boxes. I think it’ll do OK.
Last edited:
discgolferlee
Rock Crawler
watching this thread. are the wheels held on with nuts or screws or what. I am just trying to get an idea on how this thing is held together before maybe picking up a kit. looks fun. I seen the ecx barrage and thought it looked cool but these have a way better scale body
HugoBiermann
Quarry Creeper
All screws. Plastic everywhere. For the cost of the WPL trucks you cannot complain though. Its dirt cheap to buy but puts a smile on your face when you get half decent electronics in them.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Brake Weight
I wanna be Dave
Any plastic paint should work. Tamiya has a large variety of colors as do the large cans at any big box store.
Stollenritter
Quarry Creeper
Got mine today 
Started on a little sketch of the stock chassis rails for further modifications:
Started on a little sketch of the stock chassis rails for further modifications:
Brake Weight
I wanna be Dave
Getting closer.
Brake Weight
I wanna be Dave
It’s not the ideal setup but there isn’t any side to side slop. Having only 10mm of shock travel the angles don’t mean much either.
