What powers your SCX10?

[CMaD]

Axial SCX10 Honcho
Holmes Hobbies 55T
Tekin FXR Pro
HiTec 7955TG
Spektrum SR3100
Castle BEC
Turnigy 3s 3300

 

[JeffA]

You need to search more. Yes FXR can handle 3S. Cobalt motor has a 7 slot armature not 3 slots like a China motor so it has more wraps which is more resistance. So it isn't a standard 7T. Search function good!

I wasn't searching for anything in particular. Just wondered how "your" 7T was able to function on a FX-R without burning it up. Thanks, I'm aware of search function.

 

[cogfounder]

hum

 

[kurtus]

Epoxy potted Castle sv2 esc
Team brood Apocalypse Type R 27t
Tekin Pro 35t
18/83 gearing to clear the mip driveshafts
Savox SC-0251 Servo
Castle bec at 7v
3s lipo

 

[steele42]

3s Lipo
Tekin FXR
Tekin 55T motor
Stock gearing
1.9 Pit Bull Rock Beasts

 

[PhantomRS10]

Novak rooster esc
Team CS custom built 35t
Hitec 645
16/87 gearing
Strektrum dx3r
3s lipo

 

[Shivike]

3S Li-Po, Tekin FXR pro, Tekin 35t handwound, stock gearing

 

[StevenZ]

Novak Timbuk2 18.5T Motor/ESC Combo
Gens Ace 2S 3000mAh
FlySky FS-GT3B
Tower Pro MG996R
Thunder AC6 Charger
3 Racing 1:10 Winch
Tamiya LED light kit

 

[deaddant]

Mine is completely stock, but thanks for starting this thread!

 

[notproyet]

RIP Motorsports yokomo 27t 0 timing motor
Axial AE-2 esc
Spur setup - Kimbrough 90t b4 slipper with strc adapted lay shaft setup
pinion - 17t at the moment, may change
Battery - Fantom 3200 40c 2s

 

[CMaD]

Axial Wraith
Tekin hand wound pro 35T
Wraith RTR esc
HiTec 7955TG
Castle BEC
Turnigy 3s 3300

 

[tozrovr]

The usual suspects...
Tekin FXR/35T Pro Hand wound
11t Pinion
Dynamite 5200 MAH, 50C 2S lipo

 

[rockrigcustoms]

3s lipo
Team brood r/t 35t
Mamba max
87/13
Hitec 5995
1.9 pitbulls

Climbs great, just a simple trail truck.

 

[rebel35747]

tekin fxr, tekin 35tpro, 2s 5000

 

[Hydro-Tank]

Rooster Crawler ESC
HPI Saturn 27t motor

Have not gotten reciever or servo yet.:sad:

 

[AsILayDying]

HH BR-XL
Integy Lathe 35t Motor
SCX-10 Trans 16 - 87 gearing
Upgraded internals with all Robinson Racing
MIP Drive Shafts
CKRC Knuckles
HR C-Hubs
Hitec 5646WP (WaterProof Servo)
CC BEC
3s 2200 LiPo sometimes (4s and on occasion 6s)"thumbsup"
Spektrum DX2.0 (old School)
Spektrum SR300 Receiver
1.9 RC4WD Mickey Thompson's Baja Claws (4.75" tall)
3Racing Winch

 

[rockpanda]

Axial SCX10
Integy Pro 35T
Traxxas XL-5 waterproof
Turingy nano 3400MaH 3s LiPo
Spektrum AR6200
Spektrum Dx6i
Hitec 695MG Servo
3 Racing winch
CC BEC
1.9 Pro Line TSL Super Swampers

 

[liketocrawl]

Axial SCX10
Tekin FXR
Axial 55T
Castle BEC
Protek 4200 2cell
Savox 1256 Tg
Ko-Propo

 

[Speedrc91]

Traxxas XL-5 Waterproof ESC
Novak Terra Claw 55t
FS-Gt2b
T-Pro MG996r servo
Gens Ace 2200mah 2s
-All budget friendly parts but it crawls great for non-competition! Plenty of power too!

 

[xturdfergusonx]

scx-10
stock 27t motor
axial AE-2
skylipo 2s 3300

also doing the budget yet reliable route with this one. most of my money goes to my wraith. :lmao: