SAL45
Quarry Creeper
Started working on the interior
Last edited:
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
What did you do to you SCX-10 today?
- Thread starter OH6HEMI
- Start date
Started working on the interior
mikro383
Quarry Creeper
Took the whole family out, it's the orange and blue ones maiden voyage!
Sent from my XT1080 using Tapatalk
carpetfuzz17
Rock Crawler
installed Knights front grill the winch hides but it stands out "thumbsup"
1santaever
Pebble Pounder
added some side rear window packs
more parts to be installed as soon as I get more free time
what color is that i like it....
i clicked check out at rpp so my new g6 kit will be here some time this week or next
I decided I needed a roof rack. Soldered aluminum (not an easy job, at least not for me) and some sealed balsa. Probably won't last more than a couple rollovers, but looks good ATM!
Sorry for the shi**y cell phone pictures, planning to grab some better ones with the real camera soon.
Sorry for the shi**y cell phone pictures, planning to grab some better ones with the real camera soon.
carpetfuzz17
Rock Crawler
CwbyUp4
Newbie
Just joined the other day but here's what I've done so far...
Aluminum 4 link front and rear
Internally sprung Icon shocks
Cross mounted battery
Hitech steering servo
Trimmed bumpers and drilled new holes to collapse them as much as possible
Messed with the stock steering setup to get a little more throw
RC4WD Iroks with Axial bead locks
Moved fender flares up and trimmed bottom of the body
Custom aluminum side skid plates
Custom aluminum cage top for camera mounting
Altered a cheap servo to run the winch
I guess that's most of it..
Burly tubes, Wraith chubs, knuckles, and cvd's are next
Just need to figure out how to put pics up now...
Aluminum 4 link front and rear
Internally sprung Icon shocks
Cross mounted battery
Hitech steering servo
Trimmed bumpers and drilled new holes to collapse them as much as possible
Messed with the stock steering setup to get a little more throw
RC4WD Iroks with Axial bead locks
Moved fender flares up and trimmed bottom of the body
Custom aluminum side skid plates
Custom aluminum cage top for camera mounting
Altered a cheap servo to run the winch
I guess that's most of it..
Burly tubes, Wraith chubs, knuckles, and cvd's are next
Just need to figure out how to put pics up now...
MaFoDes
Quarry Creeper
Sigh... moan...
taking out the dual motors again for the o so maniest time after they got dirty during a hardcore rockcrawling run last weekend in een mountain creek.
Was able to revive one of them. The other one definitely has to be replaced.
Maybe i should go brushless.....
taking out the dual motors again for the o so maniest time after they got dirty during a hardcore rockcrawling run last weekend in een mountain creek.
Was able to revive one of them. The other one definitely has to be replaced.
Maybe i should go brushless.....
k goodrich
Rock Crawler
Spent about 30 minutes on RPP's site, I have some wraith axles and a few other items so I decided to build a wroncho. Order was places at 11 am and it has already shipped !!!!
Took my MMP out of my slash and installed it in my scx10. Also swapped my spur and pinion out 54/14. I "thought" I had my ESC programmed correctly for "crawl" but still too fast. LOL! Need to adjust the curve on the ESC again.
Bitter End
Quarry Creeper
A new bumper and tire carrier
Bought RULR's and VP lockouts, knuckles and c hubs
TURBOxN3RD
Newbie
Got the Gmade 103mm shocks installed the other day. "thumbsup"
TURBOxN3RD
Newbie
Tonight, I upgraded the stock Axial 27t motor to a RC4WD 35t. I also gave the truck a full and much needed bath.
TURBOxN3RD
Newbie
35t RC4WD upgrade.
Sent from my SCH-I545 using Tapatalk
The Bronco got a new stand (easier to work on suspension), servo, radio/receiver, stiffer foams (well, a mish-mash of 2 different sets of foams) and a few more scale bits (some wood bundles, cooler, lantern, jumper cables, tow cable, and others). All of this after a good proper cleaning of course. Then I promptly went out and tore off my running boards and filled her full of dirt in the back yard.
Squeaky clean (on the OLD stand w/o new radio gear)
New receiver and servo are well hidden
Some new bits
Exhaust, with a few new things on the roof rack
Ready to get broken and fixed again!
Squeaky clean (on the OLD stand w/o new radio gear)
New receiver and servo are well hidden
Some new bits
Exhaust, with a few new things on the roof rack
Ready to get broken and fixed again!
Last edited:
Big_Mac
Newbie
GCM STAGE 2 KIT
rustneversleeps
RCC Addict
Change my old traxxas 12T 550 Motor "which was getting too hot",for a old used 55T Integy Motor with 12t pinion gear.Will be testing it today....."thumbsup"
(redbeard)
Pebble Pounder
I did a little chopping, bending and shaping to the honcho cage on my kiddos Powerwagon....kinda neat I guess...as with mine the body had seen better days and so this was a solution to the lexan flatbed being all busted at the mounting holes. Oh and I also did a flip lip mod to this as well just like I did on mine...