Tire and Wheel selection questions.

[prioret]

Sort of a newbie but I have been reading a lot. I'm going to build a super. I was wondering if these wheels/tires/adapter would fit my (so far) stock clod axles:

Axial Oversize Beadlock 8-Hole Wheels (17mm)
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=L5PED302&P=9

RC4WD 17mm Wheel Hub for Clod & Raptor Axle (4) [X-0301]
http://www.tcscrawlers.com/RC4WD-17mm-Wheel-Hub-for-Clod-Raptor-Axle-4-X-0301-p-16687.html

Pro-Line MOAB 3.8" (40 Series) Rock Terrain Fr/Re (2)
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LM0454&P=0

Any other recommendations?

 

[lud98r]

You may want to get extenders for your hubs like a 12mm to 17mm 3/4" extenders, depending what clearance you will need for your wheels to prevent rubbing on your links or shocks.

 

[prioret]

Thats exactly the advice I was looking for.. Thanks.
So something like this:

12mm to 17mm Adaptor & Wideners
http://store.rc4wd.com/12mm-to-17mm-Adaptor-Wideners_p_183.html

You may want to get extenders for your hubs like a 12mm to 17mm 3/4" extenders, depending what clearance you will need for your wheels to prevent rubbing on your links or shocks.

 

[lud98r]

yep ebay they r cheaper