The Rock-Clod Gallery: A place to post u'r clod in action!

[Darius]

Here is my homemade torsion chassis.

65t integy's
8&9t's
jr9000t front
hitec 645 rear
TQ3 w/ push button rear steer
LRP pro reverse digital
16 1/4"

Here's mine....

 

[srfgy22]

my cloddie

My first crawler... had to borrow my t-maxx body
RCGuy Gecko Pro Chassis
2 Integy 55t motors
Cold Steel Locked Diffs
Stock Wheels and Tires (for now)
Hitec 645 MG Servos
Tekin 2 ESC
Futaba 3PM Radio
Hot Bodies Threaded Shocks

More to come..."thumbsup"

 

[drumbeater]

SW2 Clod w/ 4 wheel steering.
Integy 55ts
Traxxas transmitter & receiver
Traxxas EVX esc - soon super duty
2-Hitec 5625 servos
RC4WD gear reductions

SW3 slugbug

 

[DeaDShorT]

Slim

Meet "SLIM":mrgreen:

Homemade 17" wb "stick" type super, 6061 solid aluminum rod backbone.
MAMBA MAXX
Hitec 5985 up front, DoubleJ Chickenbutt servo rear
BTA steering front , built by me
40 series Mashers on Proline velocity 6 wheels, thanks Dan @ Finishline RC!!
40 Series MOAB XL's on flour. green Proline Velocity wheels...Prize for 2nd place @ FinishLineRC's Bunny Bash, Thanks Dan"thumbsup"
6 cell Integy 3000 pack split into knuckle packs, 3 cells on each front knuckle.
2 CPB custom 5cell/6v 2600 AA receiver packs...1 per Servo on Y harnesses
Rc4wd 8 tooth pinions, 55t Integy lathes, TTR adjustable motor mounts
AND JUST ADDED SPEKTRUM DX3...bad @$$ radio system from SparkyJ"thumbsup"

Thanks to Slugz for the sweet picture"thumbsup"

 

[mjh]

Project..."fraggle Rock"

\

It has aways to go and maybe I shoulda waited to post pics because its not tightened up not wired and my motors and elecs aren't in there but had to share

 

[dannan_w]

i just got er done. now i can say i own 3 fords....kinda

 

[raytard]

Here's how my axles looked under their first crawler:

Then they looked like this:

This is how they look now:

Not bad for plastic, that was made in the 80's 8)

 

[chino]

With the price tag I am glad I finally finished it. Enjoy.

 

[rustybudweiser]

Here is a few pics of my Modified Gecko Chassied Clod with my Scorpion and custom trailer. The clod would be on the trailer, but the nylints are too slow to pull a trailer, and slip the belts to much in high. Originally built for rocks in 2002,but found out it had too short of wheelbase. So it sat on a shelf for a while then this past summer it got pulled out and i started playing again. Just took one to many runs through the water and fried the EVX. So back to the drawing board. specs:
Custom longer frame rails
Maxx shocks. majorly outboarded. Not as much flex, but more scale to me.
Traxxas titan 550's
Novak EVX
Traxxas TQ Radio
Traxxas 2 channel B.E.C. reciever.
JB Locked clod axles
Y servo harness for 4 wheel steering
Shaved steering stops
Proline TXT outback rims narrowed 1" on the inside
Imex Jumbo Swamp Doggs, beads are almost touching

My plan is to get a new receiver and esc. Mount up a nylint jeep body that will look a little more scale to my trailer and Scorpion, and waterproof it all and that will become my mud/tow truck.

 

[rockwell]

Here's my fancy clod. My first one.

-Custom Frame
-Solid steel links
-Axial 40 series beadlocks
-Integy 55T Lathes
-Novak Super Rooster
-Traxxas TQ3 with rear steer switch
-Shaved turning braces
-Dual Hi-Tech 645's
-Moab XL's with 12 and 13 point foams
-T-Maxx shocks
-Many other custom made mounts and parts"thumbsup"

:twisted:

 

[gmc572]

my 2 clods

my ZILLA2 and my some what stocker now with traxxas 2.8's

 

[bajaginge]

heres mine!!

just got it not had a chance to go out yet but will be verry soon well here it's is,it's has a shell but i am doing my own(i airbrush alot) i will post more pic's when the new lid is finished!!

 

[Jeeper Creeper]

Gecko 2 chassis
Novak EVX
12 tooth pinions
Hobbico servos
Giant trac tires
Tmaxx shocks
CJ 8 Basher body
2 Ford 350 bodies
This is a wheelie machine

 

[Jeeper Creeper]

Thecrawlerstore stick chassis
45 T integy's
8 tooth pinions
Hitec MG945s
Novak Superduty
RC4WD beadlocks
Moabs
yada yada

 

[klabeaume]

Kevin's clod based crawler.
new 60 turn integy hand wound v10 crawler motors
12 t pinions
mod clod motor mounts
locked diff front and rear
hitec front and rear servos
Tq3 radio w/custom toggle switch for rear steer
custom made servo mounts, chassis, and link bars
1970 chevy truck body
Hot bodies tires and wheels w/ufo tires
rc4wd wheel spacers/adpters
http://i46.photobucket.com/albums/f129/tfs32/P4150101-1.jpg

 

[koops]

wife beater clod

here's my clod...cheers"thumbsup" "thumbsup" "thumbsup"

 

[Brandon M]

Heres the Green Pimp

 

[avengernut]

Custom built frame,axle snapper motors,locked diffs,full bearings,supper rooster esc,Proline Silverado body

 

[avengernut]

 

[Kermit]

Not much compared to most crawlers here, but completely scratch built.