The Rock-Clod Gallery: A place to post u'r clod in action!

[dystance]

My newly rebuild NN Clod:

55t lathes
TR2
Hitec645's
TTR CVD's
Hot bodies threaded shocks
Moabs or RedRocks on narrowed wheels W/ BB's
TTR BTA steering on front
16.5" WB
15" wide
4.5" belly clearance
TQ3 Radio w/ independent rear steer mod

 

[Harley McAuliffe]

Aussie spec Crawler

Hey thought I'd finally post up some shots of my Rig
Been in progress for bout 12 months and is ever evolving!!

Body: Hpi Ford Bronco
Chassis: Rc Guy Gecko Pro 60/40
Axles: Clod
Shocks: Ae 4in shocks, 30wt oil, red springs
Diff f&r: Trackgear III
Wheel adaptors: RC4WD.com 23mm adaptors/wideners
Wheels: Proline Cheyenne Narrows- Narrowed to 2inches wide
Tires: Proline Moab Xl- 6 ounces to front 3ounces to rear reversed tread
Skid plates: ebay specials- stainless steel
Misc: Axle braces, custom upper links

Electronics

Esc: Novak Super rooster
Servo's: Tower Pro mg995
Receiver: Spektrum
Battery: 8.4v 3300mah
Misc: Switches on front and rear motors, novak cooling fan, deans, servo savers

Sizes

Wheelbase:16.75 inch
Track width: 15 inch
Centerclearance: 3.5 inch

nce

 

[STANG KILLA SS]

55Ts
9Ts
16" WB
Moped Esc
homemade chassis. working on Carbon fiber plates now
MT2 shocks
Axial beadlocks
homemade 12-17mm adaptors
Moab XLs
Proline Silverado HD (huge MGT size)

 

[naftausa]

that's mine OCTOPUS!!!

TXT frame cutted chassis...

two clod buster axles

of course 2 integy 55t motors

tq3 radio equipped

hitec ezx pro esc

modified clod wheels

pro line giant trac tires

pro line cj8 boy or modified traxxas emaxx body.. depending if i'm in race or not...:lol:

hand made skid under axle made by extra blu "wet plastic"

hand made "C"

last modify... battery on the axles, with hand made support...

what do ya think??? :?:

8) 8)

 

['83 chevy]

chassis- homemade single backbone

Truck Base :Clod

ESC:lrp runner

Motor(s):2 55t's

Servo(s):645 mg's front and rear

Axles:Clod

Tires:lst claws on maximizer x-75 beadlocks

WB:17.5"

Overall Width:17"

Diff clearance:2 1/4"

Center Chassis clearance:5'

Overall height10"

Overall weight:around 11lbs

 

[dugfrompa]

more clod pics

well i guess i could post some pics
http://i105.photobucket.com/albums/m231/crawln_coles/P1010088.jpg
http://i105.photobucket.com/albums/m231/crawln_coles/P1010106.jpghttp://i105.photobucket.com/albums/m231/crawln_coles/P1010092.jpg
http://i105.photobucket.com/albums/m231/crawln_coles/P1010093.jpg
http://i105.photobucket.com/albums/m231/crawln_coles/P1010103.jpg
http://i105.photobucket.com/albums/m231/crawln_coles/P1010101.jpg
http://i105.photobucket.com/albums/m231/crawln_coles/P1010099.jpg
http://i105.photobucket.com/albums/m231/crawln_coles/P1010094.jpg
http://i105.photobucket.com/albums/m231/crawln_coles/P1010107.jpg

 

[clodstall]

here is mine being worked on:

on the rocks:

 

[doctorducttape]

My v2 chassis not any special
and yes i did crawl to that spot

 

[dugfrompa]

 

[moab0lllllll0jeeper]

This belongs to my 6 year old son, CJ. He is going to kick tail in the comps next year.

It has:
55t motors
2.2 Red Rocks on pede wheels
MG645's 4WS
Teken R2
JR radio
Dadmade frame.

 

[Just Zach]

Superbug

Here's my super, finally finished it enough to take a picture
Clod Based
16.5 wb
Rockbull 2 Chassis
Integy Piggyback Shocks w/dual rate springs
Narrowed Mashers on Narrowed HPI Wheels
Spectrum
Losi Bug Body Custom Paint by Joe Harker

 

[Link]

My Brothers Pimp Cane X-mas gift,

 

[95yj97xj]

Clod #7

Had too many, so started using numbers to tell them apart, but this is my main crawling one:

16" CPE Evo chassis, Hot Bodies T-Maxx shocks
Savage tires, RPM rims, RC4WD Adaptors
2 Novak XRS ESCs
2 Hitec 645MG Servos
Airtonics Avenger w/ servo regulator
Integy 65T w/ 9T pinions w/o adj motor mounts
BTA front steering
Jeep Body

 

[trailduster79]

Homemade chassis
Clod axles locked with JB weld
T-maxx threaded shocks
Moab XL's on narrowed Proline beadlocks
Hitec 645MG front, Bluebird rear
LRP AI waterproof ESC
Traxxas TQ3 remoted modded for rear steer
16" wheel base
4.75" belly clearance


http://home-and-garden.webshots.com/photo/2012891770051540479eYthpq
http://home-and-garden.webshots.com/photo/2034745310051540479wjrqXj

 

[M715ForLife]

chassis- homemade single backbone

Truck Base :Clod

ESCroboat

Motor(s): stockies

Servo(s):some cheapies!

Axles:Clod

Tires:stockies

WB:12.5

Overall Width:...IDK

Diff clearance:2 1/4"

Center Chassis clearance:5'

Overall height10"

Overall weight:around 2Lbs

 

[jayyeone]

here is my babyn action

 

[Offroader5]

Chassis: Homebuilt of 6061 alum.
ESC: Tekin Rebel 2
Motors: 55t Integy Lathes
Servos: Hitec 775MG Quarter Scales
Tires: HPI GT's
Wheels: Maximizer X-75 Beadlocks
Shocks: ProLine Dual Rates
Batteries: 7 cell 2500 mAh "A" pack (CheapBatteryPacks.com)"thumbsup"
Radio: Spektrum DX-6
Wheelbase: 17.5"
Overall Width: 15"
Belly Clearance: 5"
Overall Chassis Height: 7.75"
Overall weight: 9.5 lbs.

Delrin belly skid, Delrin 3/8" suspension links, Delrin top link mounts, Delrin steering linkages, RC4WD alum. rod ends, RC Guy motor mounts, Crawler Store wheel adapters/wideners, custom wheel weights, JB Welded diffs, 8 tooth pinions, custom 6061 servo mounts....I think that's it.

<----- Click To See Big Versions


Build thread:http://www.rccrawler.com/forum/showthread.php?t=38828

 

[jeeper_rc]

Chassis: Rockbull II

ESC: Super Rooster

Motors: Integy 55T

Servos:Hitec 5955

Axles:Clod

Tires:Moab XL

WB:17"

 

[LockedinLow]

Heres my 2.2 Torsion

 

[koops]

my clod

"thumbsup" "thumbsup" "thumbsup"