shakes titanium bjv4 build

[booher26]

This is my one off Titanium BJV4 chassis. hope you like it...
Krawl Freak's BJV4 design with a twist
Brood 45t handwounds
Winks links Ti ( thanks for the help ryan)
Rowdy front axle battery mount
chaotic crawlers Ti steering link... Thanks Tim
VP knuckles C's
hotracing gears
DH front
slw rear
4Pks and skins in route from Krawler Koncepts
check it out hope you likey

thanks BigBlackCummins for the polishing work

lower skid .060 kydex

thanks winks links

vp goodies showed up

Brood 35t's

Titanium tierod

thank you Krawler Konceptz

thank you Mayhem Eng.

 

[Jeepkid]

Right on man"thumbsup"
I had no issue with the stock gears also, just want something with a little strength. Ppl break all around me with hardened gears.

 

[WOUrugger51]

Oh man... I want a set of those links

 

[Chaotic Crawlers]

Whats the thickness of the Ti plate???
That's bad ass man!!!!!

 

[DickyT]

Sexy for sure! What does the chassis weigh?

 

[booher26]

Whats the thickness of the Ti plate???
That's bad ass man!!!!!

.050

Sent from my DROIDX using Tapatalk

 

[booher26]

Sexy for sure! What does the chassis weigh?

5lbs 9oz complete with the 1320 lipower battery ready to run

Sent from my DROIDX using Tapatalk

 

[booher26]

Oh man... I want a set of those links

hit up winkscrawler they are awesome and he got them out to me super fast!"thumbsup"

 

[booher26]

Whats the thickness of the Ti plate???
That's bad ass man!!!!!

i got the Ti tierod thank you. im gonna keep the one i ordered wrong and use it for my Foff build that is starting next week... this hobby is gonna kill me... or atleast my bank account :lmao:

 

[baddman]

Hey boo looks great this next comp we are all going to be running new rigs!!

 

[brazwewn]

Really liking those links. That will be my next purchase for sure.

Wes

 

[booher26]

new parts showed up today

 

[DickyT]

new parts showed up today

You linked a photo from your first post.

 

[booher26]

You linked a photo from your first post.

didnt mean to put it in the main post thank you

 

[fa1rch1ld]

How much does the ti chassis weigh compared to the stock bj4? Not the total
weight rig.

 

[booher26]

How much does the ti chassis weigh compared to the stock bj4? Not the total
weight rig.

i will have to weight it when i tear it down this weekend, i didnt do that when i got it cut

 

[JimmyJam]

right on booher. Your rig is looking SWEET!!! I'm gonna have to go back to the shop and get back to work on mine. I just got a set of winks links too and I noticed you mounted yours onthe inside of your chassis. I mounted mine on the out side and am havinbg a little bit of binding. I also tried the inside but thought it was worse. I must have missed something. I'm gonna go switch it again and see what happens. Keep it up. Ti chassis is bangin!!!!!!!!"thumbsup""thumbsup""thumbsup"

 

[booher26]

right on booher. Your rig is looking SWEET!!! I'm gonna have to go back to the shop and get back to work on mine. I just got a set of winks links too and I noticed you mounted yours onthe inside of your chassis. I mounted mine on the out side and am havinbg a little bit of binding. I also tried the inside but thought it was worse. I must have missed something. I'm gonna go switch it again and see what happens. Keep it up. Ti chassis is bangin!!!!!!!!"thumbsup""thumbsup""thumbsup"

Mounted on the outside the uppers and lowers hit eachother mounted inside they seem to work better for the 10 min I ran it before destroying the rear diff

Sent from my DROIDX using Tapatalk

 

[xgerstandtx]

These pictures do not do this rig justice. An awesome take on a great designed chassis. Good work shakes.

 

[booher26]

These pictures do not do this rig justice. An awesome take on a great designed chassis. Good work shakes.

Thank you, its going to be alot cooler by next weekend though new skins a boat load of VP stuff arriving daily...