SCX10 Picture Archive - No talking

[Blue218]

My new body...Zombie Response Team Comanche:

Blue and Red Light Bar ordered.

Paint by : Oscar

Playin around the yard:

 

[rangair94]

Just finishing this up

 

[gillbily23]

My Desert Militia Honcho that is going to be a donor vehicle to a tube chassis that I have ordered.


Did up some axle tubes for it a while back and had posted pics on URC but not on here.

 

[greengoblin]

I just finished this for my boy. I will post some run photos after his birthday. Its the truck on the right.

Some shots from his first run. The truck did its job mande him smile.

I would like everyone to welcome to the family Project BIG BLOCK.

Project old school meets Project BIG BLOCK

Photos fron BIG BLOCKS first run

The last run we did and as you can see our family has grown some. Not everyone was present at time of first photo.

The line up

 

[axial 4x4 crawler]

I hope this picture uploaded... (this is my first photo to upload so don't judge me)
View attachment 264240
Here is my honcho parts on it:
- Mickey thompsons 1.9
- Gmade beadlocks (cheap but good)
- Tekin Fx-r w/ 35t motor
- vanquish shock hoops
- rc4wd 103mm aeration shocks
- level3 racing droop kit
- axial metal links/front tie rod
- 4-linked in front also

 

[RC_ROD]

COMANCHE BODY, MMP, 18.5T CRAWLER BALLISTIC, AX-2, PUNISHER FRONT, JUNFAC REAR, 3S 2200 MAH

 

[CamposZac96x]

 

[eurofocus]

Still working on the build but getting a little bit done every day. This was not only the first axial I've ever owned or worked on, but the first kit I've ever built. I'm impressed with the truck so far! Comments and suggestions appreciated.

As for the led wiring, that setup should be temporary, trying to figure the cleanest way to run and hose the wires, there is also a rc4wd Bulldog Winch on my bench ready to be installed. I however will have to fab up a plate to mount it on the stock front bumper as I want to retain the bumper for the led pods.

Sent from my SGH-I337M using Tapatalk

 

[Deadpool]

both of my trucks my honcho-project taco (big red) and my new dingo ole yeller

 

[Hunter711]

Ready for snow.

 

[friz]

 

[rollinbigpower89]

and this is when we get the pullin sled out.

Sent from my pocket device.

 

[northkona]

[/IMG]

Mini Me
SCX chassis , BRXL,HH 35t, 3S, Proline JKU body, 1.7 Irok ,1.7 Wagon wheel, home fab steel bumpers.

 

[krank22]

my rubicon wroncho project. novak 21t and goat 3s esc. gmade shocks and wheels. home made upper links.

 

[CamposZac96x]

TSL XL on Gmade Steel wheels

 

[JCO245]

 

[SkyJacked]

 

[4by4]

Axial SCX10 G6 Wrangler

GCM Mounts, transfer case
Vanquish Currie Rock Jocks
Pitbull rock beasts
tekin 45t/fxr combo

 

[mojave450rider]

 

[Postclanker]