• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Puller Pro Brushless 4 pole Rock Crawler motors- Lay down the Power!

Re: Puller Pro Brushless 4 pole Sensored motors- Lays down the Power!

I recieved my 3500kv puller pro and mamba x esc and got instslled and running in my bomber with 11/68 gearing single speed on 3s I have too say I couldn't be happier. Slow and steady and fast in the same motor. Been playing with the settings but being able to turn the drag brake off and on is great and the power this motor puts out is crazy.
I now think I'm going to change my wraith next. running 10/58 gearing on 3s do you think I would be better with the puller pro 2200 or 2700. No need to be as fast like my bomber since it's more for slow use.
 
Puller Pro Brushless 4 pole Sensored motors- Lays down the Power!

As a wraith pilot running a 3500 on 3s 10/58 go with the 2700.
I have great fun with this combo, and wheel speed. I’m going to drop to a 9 just to slow reverse down, more than anything.
If you want to go to 4s, then go 2200


Hang up and Drive
d0839d1003a4a2abd8af430bd2219d63.jpg
 
Re: Puller Pro Brushless 4 pole Sensored motors- Lays down the Power!

Hi, can you recommend where to start gearing a Puller Pro R with a MMX in a Yeti on 3s? I was thinking 13/64? Any help would be appreciated

CC
 
Re: Puller Pro Brushless 4 pole Sensored motors- Lays down the Power!

Curb Crawler said:
Hi, can you recommend where to start gearing a Puller Pro R with a MMX in a Yeti on 3s? I was thinking 13/64? Any help would be appreciated

CC
Click to expand...

Sounds like a good start. You can really gear it about anywhere, the battery will care much more than the motor.
 
Re: Puller Pro Brushless 4 pole Sensored motors- Lays down the Power!

1400kv revolver 540 and sidewinder 4 would be really sweet in that rig.
 
Re: Puller Pro Brushless 4 pole Sensored motors- Lays down the Power!

Thanks for the info. Order next on my list.
 
Re: Puller Pro Brushless 4 pole Sensored motors- Lays down the Power!

ETA on when the Revolvers will be back in stock?
 
Re: Puller Pro Brushless 4 pole Sensored motors- Lays down the Power!

JohnRobHolmes said:
1400kv revolver 540 and sidewinder 4 would be really sweet in that rig.
Click to expand...


Motor on the way from you for the Capo 8x8. Going with the Castle Sidewinder 4 as you recommended.

Thanks
Again!
 
I am trying to decide between the Puller Pro 540 Standard 3500kv and the 540-L Crawler which is 4100kv. It will go in my Bomber, on 3s with a Mamba Monster X. (I have built two other Bombers using Mamba X with Yeti 3150kv for the kids). I want to build one for me for hiking, trailing and crawling (but not hard core technical crawling) and want more low end control and with at least the same top end .While there is plenty of user experience on the 3500, I am having a hard time finding user experience with the 4100. Is anyone using the 4100 that could share their experience? or John, could you help with the decision? Does the 4100 give up anything to the 3500 or is it purely the kv?
 
The 4100 is for racing. Since you aren’t racing, I don’t suggest it. The 3500 and 2700 is better suited for daily trail use.

The downside to the 4100kv is mostly that it puts the hurt on escs. Fine for 7 minute races. Not good for 45 minutes or more crawling.
 
John,

What motor-esc would you put in a TF2 Marlin Crawler C1 comp/trail rig?

Thanks
 
You must log in or register to reply here.

Similar threads

T
Puller Pro V2 timing adjustment
Replies
15
Views
2K
TheLetterJ
T
soze
New Hobbywing Quicrun Fusion 2-1 FOC Brushless motor/ESC Combo for Rock Crawling
2 3
Replies
42
Views
23K
AndrewRC
A
Honeyman108
RCBee TRX-4 Honey Comp Crawler Build Full Mod
7 8 9
Replies
170
Views
33K
Honeyman108
Honeyman108
T
Surpass 540 775 diameter skewed armature 80A Auto Hold ESC compare to HH magnum brxl
2
Replies
20
Views
4K
tommyclerk
T
Voodoobrew
Silent outrunner and ESC for less then $60
16 17 18
Replies
356
Views
117K
themountain
T
Back
Top