Post your 1:1 Rock Crawler

[m4rK]

A typical one ton v8 toy. Built it up and had it since 96. Sold it last winter, I just lost interest in wrenching on the fullsized stuff.
Plus our good local trails are closed now, end of an era..

 

[jonnyB4]

buggy i built last january...

fresh, barely wheeled....

running the rubber rock at moonrocks NV last memorial day...

basic toyota buggy.. toy axles, spooled and 30 spline chromo's f/r, 4 link f/r with fox air shocks, pics have 38'' tsl's, but now im running 37'' pitbull rockers:mrgreen:... getting ready for the NOR-CAL rock racing series. maybe even KOH next year....

 

[AdverseCity]

Not mine but I help wrench on it and drive it often, it sees more mud than rocks when the owner drives it but I crawl every time I get a chance behind the wheel. Not a lot of rocks near his campsite but there's an old gravel pit that's pretty fun.

"The Jevy"
80's Blazer frame chopped with an aluminum Jeep tub body (after rolling it multiple times down a hill and crushing the original body),1 ton axles, 454 engine, 46" MT Claws, front and rear Warn 9000's, not sure on the rest but the drivetrain is all beefed up.

 

[theloudone]

83 yota, dana 60's 5.86's locked f/r, 42's, propane. dual cases

this is by far my favorite

 

[crawlinnTN]

This count?
2006 ford f350

 

[jeepinkid83]

Just got my 1:1 updates finished:

 

[desertmaxx]

here's mine. yota/samurai. toyota V6, marlin crawler dual cases, FOA coilovers, FOA bumpstops, 2" 4130 custom cage build by myself, badlands winch(not shown), yota axles, 37" wranglers, aluminum wheels, front 3 link with panhard bar, rear 4 link with trailing arms, JE reel driveshafts, Jaz fuel cell, 105" whelsbase, and and all race legal.

 

[desertmaxx]

accualy, most of the parts transfered from this 4-runner i had for years. thing was just too tall. the second pic was after my crash in it(my birthday too). that was the day i decided to put a cage in it.:roll: if any of you read 4wd toyota owner magazine , my 4 runner was featured in it.:mrgreen:

here's mine. yota/samurai. toyota V6, marlin crawler dual cases, FOA coilovers, FOA bumpstops, 2" 4130 custom cage build by myself, badlands winch(not shown), yota axles, 37" wranglers, aluminum wheels, front 3 link with panhard bar, rear 4 link with trailing arms, JE reel driveshafts, Jaz fuel cell, 105" whelsbase, and and all race legal.

 

[BLOODBANE]

What I have been working on lately
From this.....

to this...

6" SPOA, 32 " Pro-Comp MTs, OTT steering, and Dodge Neon seats. I don't know about going with lockers yet ( I still have my Ranger and Explorer), but we will see.

 

[ridepate]

My little 1:1

 

[crash]

Here's my Long Wheelbase Sami, yota axles , 16 vlv, bunch of goodies:mrgreen:
This thing was shipped from Alberta to NM, and that's where I found it. Now resides in Crawlerado

I knew a guy who did that once...

 

[KBess1110]

My little 1:1

Hahha that this is sick! How does it do actually!?!


Sent from my VZW Rezound using Tapatalk

 

[73bronco]

Here is my toy. '72 bronco. Just finishing up narrowing the entire body 10". Cage from front to rear all tied into the frame. Every bit of it done by me.

 

[ridepate]

Hahha that this is sick! How does it do actually!?!


Sent from my VZW Rezound using Tapatalk

It actually crawls great.

 

[Atchley]

Enough of the Jeep thing... We GET it. That's why we don't drive them...

Word:mrgreen:

Here's my junk. I don't have any pictures of it wheeling cause nobody I wheel with will take pictures. Maybe one day I'll get some. The tubing is all black, I started to do AC orange but I can;t get away from flat black.

 

[LKN Crawler]

Here's mine. Had to go back to a larger Jeep because of my son. He is 2.5 and absolutely loves crawling or as he calls it Jumping. We get out at least once a month. I have a couple of CJ's I'm working on too.

 

[badhoopty]

timmy tintop

'rescued' the little dude off craigslist. it was originally made by some guy in maine, then sold on ebay to a kid in wisconsin, who tore the living crapola out of it. i traded a pretty nice but not as wild samurai for it, then proceeded to tear the whole thing down and pretty much replace anything that was used to spn or stop.

1.6 tracker motor, yota axles, yj leafs, tcase gears, power steering... the usual samurai stuff.

i drove this thing daily in downtown chicago for over 2 years. then i would drive it 2hrs to the trails, wheel, then drive home. pretty solid little rig. i doubt i'll ever let it go. "thumbsup"

i also have this thing which i now drive everyday. would love to someday do a solid axle swap, but not today...

 

[Tommy R]

And a Ram Air LS1 T/A in the garage? Nice collection and I LOVE the Sammi!

 

[johnnyh66]

And a Ram Air LS1 T/A in the garage? Nice collection and I LOVE the Sammi!

good eye "thumbsup"

 

[losimicrocrawler]

omg guys all of these rigs are so sick, im only 15 and saving for a cherokee , ill post when i get one, haha!