• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Pics of your latest purchase

18725004152f741c66b354b786fa9736.jpg



Sent from my iPhone using Tapatalk
 
Lil something for my ducks. 14x3ft pool. Will dig it into the ground and build a 'ramp/stairs' on one side for them to get in and out of. This should hold up way better than the 12ft pool cover I was using previously. Worked well, but their nails ended up cutting it as one of them was getting out one day.

They've been missing their poos no doubt, so as soon as it gets warm I'll be diggin a hole for it to fit into. The one I got only needs to be a bit bigger in diameter, but I need to go down 18 or 20 inches maybe to get the frame down and near level with a high spot where I'll put the ramp/stairs at.

 
The servo for a new 1:28 scale (essentially, like a Mini-Z , but not "Kyosho") I'm currently building was delivered today. I liked the look of it so much, I ordered two of them (I know the extra will get used in 'something').
2ab9141783ee36920a2d30df4da441ed.jpg



~ More peace, love, laughter, & kindness would make the world a MUCH better place
 
New stuff arrived from twade984. Thanks Tom!

Let see...new S8E take off shocks from a Fordyce, NIP VRD Carbon S8E shocks and NIP ISD10 driveshaft set.

All for future builds.:)

IMG_3747.jpg
 
Where are u scooby-doo? We got some work to do! Lol Just got in some chanquish roost 1.9s for the 6x. Still waitin on fab stuff. Cant wait to get started on the bed
760c09ca4181fbd68dfe46c35a7d0cc9.jpg


Sent from my SM-A516V using Tapatalk
 
I got low range crawling gears, a Holmes Hobbies 66T brushed motor and an STRC (haven’t gotten anything from them in ages) 4mm/5mm wheel wrench for my Traxxas TRX-4M High Trail K10

And a VRD Carbon kit. "thumbsup"

8d1b3c08a17e5fbb9bcc31bb9021c007.jpg

299be8d30446b9a564c4cf4bf7a4147d.jpg
 
I got low range crawling gears, a Holmes Hobbies 66T brushed motor and an STRC (haven’t gotten anything from them in ages) 4mm/5mm wheel wrench for my Traxxas TRX-4M High Trail K10

And a VRD Carbon kit. "thumbsup"


I’ll be interested to hear how the HH 66T motor works. I’m still trying to figure out an upgraded motor for my M’s.


Sent from my iPhone using Tapatalk
 
I’ll be interested to hear how the HH 66T motor works. I’m still trying to figure out an upgraded motor for my M’s.

I will definitely keep you posted. I wanted to install the motor and low range gears last night, but once I got the transmission open I realized my Jims Bearings are still not here. My AliExpress order may beat the Jims Bearings to my house. Anyway, OSRC uses this combo of Holmes 66T motor and low range gears, as seen in his TRX4Ms thread, so I am sure it is good. "thumbsup"
 
New to me chair for the workbench and the last Sport Kit at my LHS. I understand they are discontinued so figured I would grab it for a future project
cdf1e77e25ad14f4d9aa31a06eb775b2.jpg
8ebe16badc4bd8a58aea408a8b14cc63.jpg


Sent from my SM-G990W using Tapatalk
 
New to me chair for the workbench and the last Sport Kit at my LHS. I understand they are discontinued so figured I would grab it for a future project

Good pickup with the Sport kit! Just last night I was going to recommend this kit to a guy on Facebook and discovered it’s no longer available. The only way to get a TRX-4 kit now is with Traxxas electronics included. Bummer.
 
Good pickup with the Sport kit! Just last night I was going to recommend this kit to a guy on Facebook and discovered it’s no longer available. The only way to get a TRX-4 kit now is with Traxxas electronics included. Bummer.
Yeah, It sucks they discontinued it. It's a classic. Always liked the body and tires that come with it.

Sent from my SM-G990W using Tapatalk
 
Just an FYI for anybody making new purchases at AMain Hobbies. Use the code NCJ24 for 15% off. It saved me $64.50 on my VRD Carbon kit and $22.50 on my Fusion Pro!
 
Smog, thats a good lookin ol squarebody stepside u got on the shelf there. Did u paint that?

Sweet jato, thanks for the discount!

Sent from my SM-A516V using Tapatalk
 
Extreme RC CF plates for one of the Promotos.




Sullivan cable and cable clamps to make up 2 new brake cables for both bikes when the stock ones go south which the one on the Maico is already a bit mucked up.




A couple of these cable clamps from my last purchase pics will be used.
 
Smog, thats a good lookin ol squarebody stepside u got on the shelf there. Did u paint that?

Sweet jato, thanks for the discount!

Sent from my SM-A516V using Tapatalk
Keen eye Bama, yes I did paint that. It's a Proline Body a painted some time back. I added a Shapeways printed grill that came from either RCNerds or James Knight. Not sure if PL still makes it or not but it's a really nice body. Still has the making on the windows. There are some details yet to finish.

Sent from my SM-G990W using Tapatalk
 
Manganese chain for the bikes when I need one.
around 12 bucks so not too bad with 13ish days shipping from the Chy-Nas. lol
 
Back
Top