New Associated Enduro Crawler - Free-Mods & Upgrades

[mikemcE]

Isn't the weight more useful if it's out closer to the wheels?

That depends on tires and foam choices. I run metal beadlocks already .
Not sure if tires need more squish or weight up front


Hang up and Drive

 

[Cesco]

Element RC Upgrades Vendor List

EDIT.

As you can only put 12.000 characters in a single post and we needed way more shock than that for the complete and ongoing growing list..
The Element RC Enduro Upgrades Vendor List is now transferred to a new topic:

http://www.rccrawler.com/forum/elem...3-element-rc-enduro-upgrades-vendor-list.html



(Yes, there are too much vendors liking Element RC and adding upgrade products to stick into one post :twisted: "thumbsup")

 

[punkindrublik]

intheworksrc.com I got my links there. I know fishscrawlerparts.com has some stuff too. Might wanna add em.




.

 

[MaX-D]

That depends on tires and foam choices. I run metal beadlocks already .
Not sure if tires need more squish or weight up front


Hang up and Drive

So is the weight of the metal beadlocks enough for weight up front?

 

[mikemcE]

I’m really thinking it is.Not sure brass knuckles will add any side grip, as this truck seems happy


Hang up and Drive

 

[Browneye]

>snip

Can OP please ad this list to the start post?

Added. If it needs to be edited just let me know.

 

[Shinchu]

MIP driveshafts!
https://www.rpphobby.com/product_p/mip19110.htm

 

[mikemcE]

Beefs Tubes

https://www.beeftubes.com/store/p335/ELEMENT_BEEF_TUBES_-_FRONT_-_BRASS_-_HARD_-_SPLINED.html

More types on site


Hang up and Drive

 

[B-MOW71]

Beefs Tubes

https://www.beeftubes.com/store/p335/ELEMENT_BEEF_TUBES_-_FRONT_-_BRASS_-_HARD_-_SPLINED.html

More types on site


Hang up and Drive

Just ordered front and rear hard! Only 2 left!


Sent from my iPad using Tapatalk

 

[mikemcE]

We ordered at the same time, 1 front left


Hang up and Drive

 

[CODYBOY]

MIP driveshafts!
https://www.rpphobby.com/product_p/mip19110.htm

Hey Chris, Marcia and I are in SD, been trying to send you a message with a contact # so we can get together, but your inbox is full.
Ernie

 

[Cesco]

Added. If it needs to be edited just let me know.

Thanks. I just added more to my post: GPM, SOR Graphics, East Coast Vinyl Werkz. Fish's Crawler Parts, Luxury RC and Intheworks RC.
Details in post # 264: http://www.rccrawler.com/forum/elem...rawler-free-mods-upgrades-14.html#post5966977

 

[B-MOW71]

We ordered at the same time, 1 front left


Hang up and Drive

Looks like we got them just in time!"thumbsup" By what Dan was saying there may not be anymore for awhile!

Thanks. I just added more to my post: GPM, SOR Graphics, East Coast Vinyl Werkz. Fish's Crawler Parts and Luxury RC.
Details in post # 264: http://www.rccrawler.com/forum/elem...rawler-free-mods-upgrades-14.html#post5966977

That's a great list you put together!"thumbsup" Thanks for taking the time to do it!

 

[Cesco]

Well, sharing information is what this hobby is all about, helping each other out. "thumbsup"

I expect more vendors soon. Powershift RC is gonna work on a light kit (asked him). Bloodbrothers Graphics are working on a decal set / wrap for the Enduro bodies (spoke to them on the Recon G6 Belgium). I am hoping on more vendors offering light kits. I send MyTrickRC a message asking if they will come up with something. No answer yet.

Asked FreqEsKinz in August if he will offer wrap/skins for Element RC bodies. He was too busy and looking for someone that can help with making the templates.

What I really hope for is a narrow axle mod or upgrade. So we can use narrow bodys and keep scale looks. Asked Beeftubes for it and answer was in time. I looked at my axles and I think best bet is new axle housings. If anyone knows a mod for it. Gonna start a Enduro project for my son and he won a body at the Recon G6 that is only 210mm wide. Looking for some way the shorten the axles a bit so it will not look like a monster truck with the tires standing next to the body.

 

[punkindrublik]

Thanks. I just added more to my post: GPM, SOR Graphics, East Coast Vinyl Werkz. Fish's Crawler Parts and Luxury RC.
Details in post # 264: http://www.rccrawler.com/forum/elem...rawler-free-mods-upgrades-14.html#post5966977

Did you see my post right after yours? intheworksrc.com has a full lineup of links...

 

[Cesco]

Did you see my post right after yours? intheworksrc.com has a full lineup of links...

Sorry, missed it, now added to the list above.

Also just noticed on there Facebook page, Treal Hobby is also working on parts for the Element RC. They did a lot of stuff for the Redcat Gen8.

 

[MaX-D]

That post with all the vendor links should be a sticky under the picture gallery.

Sent from my LM-G710VM using Tapatalk

 

[Cesco]

Would make sence.

I asked Mytrickrc if they will offer a light kit for the Element RC bodies. Answer: we are working on it.

I think we will see a lot of upgrade parts from more and more vendors added before the end of this year.

 

[durok]

Per a spare parts listing on the Element RC website for some wheels (no pic yet, out of stock) - we may know at least the name of a new wheel model - the Ocho - Hmmm... could they be for yet another new vehicle? :shock:

https://www.associatedelectrics.com/element/parts/details/42109-ASC42109-enduro_the_ocho_wheels_1_90_in_black/

Copied from the website~

Enduro The Ocho Wheels, 1.90 in, black

#42109 contents:
qty 4 CR10 The Ocho Wheels [1.90"], Outer (Black)
qty 4 CR10 The Ocho Wheels [1.90"], Inner (Black)
qty 4 CR10 The Ocho Wheels [1.90"], Plastic Hex Adapter (Black)
qty 4 CR10 The Ocho Wheels [1.90"], Ring (Black)
qty 4 CR10 The Ocho Wheels [1.90"], Nut Cover (Black)
qty 24 M2.6x10mm BHCS Self Tapping (BHCS Self Tapping, Black)

 

[durok]

...and anyone wanting a budget front bumper and rollbar (not sure of rollbar fitment for the Sendero, but it's for the Trailwalker) - only $12.99 for all the parts pictured below! Includes antenna and GoPros as well!

https://www.associatedelectrics.com/element/parts/details/42146-ASC42146-trailwalker_bumper/

Trailwalker Bumper

#42146 contents:
qty 1 CR10 Trail Walker Bumper, Front
qty 2 CR10 Trail Walker Bumper, Front Mount
qty 1 CR10 Trail Walker, Plastic Fairlead
qty 1 CR10 Trail Walker Body, Light Bar Hoop
qty 1 CR10 Trail Walker Body, Left Light Bar
qty 1 CR10 Trail Walker Body, Right Light Bar
qty 3 CR10 Trail Walker Body, Cameras
qty 1 CR10 Trail Walker Body, Horizontal Antenna Mount
qty 1 CR10 Trail Walker Body, Vertical Antenna Mount
qty 2 CR10 Trail Walker Body, Molded D-Ring
qty 4 CR10 Trail Walker Body, Light Bar & Backing Plate
qty 2 M3x0.5x8mm BHCS
qty 4 M3x0.5x10mm BHCS
qty 2 M3x0.5x12mm BHCS (Black)
qty 2 M2.5x0.45x16mm SHCS (Black)