My Axial/VP10

[spillproof]

Well now that I have an actual working crawler, we need to get out some. I love that I have a trail truck and a crawler now

PM me a price, here or at maritimescalerc.org

 

[losiking1]

Well the mailman dropped a surprise today!! Thanks to Ryan @ East Coast RC for some Hulksta beef. And only 5 days to my door!!"thumbsup""thumbsup"

 

[losiking1]

My son and i were out Sat and got a few pics. Hope you like.

My fav

 

[losiking1]

Thought i really liked the Sedonas, but went back to the boss claws. A little cut and shave on them and they do work much better than the Sedonas."thumbsup""thumbsup"

 

[losiking1]

Couple more pics from Sat

 

[winnerone23]

Looks great! I'm goin to agree with you on the tire selection... I went from shaved rovers to the Bc's an wasn't really sure I was goin to jump the boat on my rovers, after spending a couple 3 hrs a day with the Bc's an a 1st place finish at the last comp/gtg, I'm sold! I watched other guys with the rovers an dona's an they just stuck to the rocks an much smoother to crawl with when wheel speed is needed. No crazy hopping goin on, just spin an bite. Also what I found was lower wheel speed makes them work great, like on the way into or out of full throttle is when they work best with grip, not full speed spinning.. I was surprised also how well they even worked on smoother rock..
Also digging them panels! It's a good look

 

[losiking1]

Thanks. I cut the roof panel wide enough to cover the top edge of the cf cab for a little extra protection. The hood and roof are just cf decal sheet."thumbsup""thumbsup"

 

[losiking1]

Well i poofed another MMP Wednesday so the trusty Tekins are heading back in this weekend. Praying for a little sun next weekend to drain some batteries and a few more pics before the snow flies

 

[sfpumps]

Looks good man. How do you like the agent

 

[losiking1]

She's a dream to drive at 4.5lbs. When i was running stock it was 6lb even. "thumbsup""thumbsup"

 

[winnerone23]

I'm with ya on the trusty tekins! I made a comment else where bout having the same problem with my castle stuff an I got razzed like I was the Only one that ever had smoked castle esc's.. anywho.. I'm right around 4.6lbs with my rig as well. I know it out crawls an feels way better then the 6lb'er I ran before it..

 

[losiking1]

Well i just finished up rewiring my esc's. Soldered up the motors and it's alive!! Gonna whip them out again tomorrow and tidy up the wiring. Feels good to have her running again. Can't wait till next weekend now!!!"thumbsup""thumbsup"

 

[spillproof]

Nice.

I need to send my SWM back for repair, so I am probably down for the year... Unless I buy a third just to have a spare. We'll see if I can get out on the rocks with you yet... lol

 

[losiking1]

Well got a parcel notification today from Mr. postman. I ordered some 3mm threaded inserts from Dr. Frank to make some carbon fiber chassis braces. Stay tuned over the next bit on a teardown/ rebuild and general tidying up of stuff. I also have some Hulksta beef to throw at this puppy!! I'll post some pics as i progress through.
Also happy holidays to all members and vendors (2nd family!!!). "thumbsup""thumbsup"
Mark

 

[redrokin00XJ]

So..... Question?

Why is everyone ordering these from Dr Frank? I see these things in every hardware store I go into. Are they not that abundant in other areas? Don't get me twisted... Dr Frank is an evil genius and I have not against him. Just curious I guess.

 

[losiking1]

I've looked everywhere here in Canada but can't seem to find them. Also they measure out to fit inside 7mm carbon fiber tube with a little massaging. The tube i have is 5mm id and these inserts are 5.3mm.

 

[losiking1]

Been a while since i posted(damn winter!!) A few little additions. Got my Hulksta axles fitted. Nice work btw. And just ordered a BLS157hv servo. My 7950 crapped out on me. I will send it in to Hitec and use as a back up. Other than will be getting out on the rocks soon. Will post some pics when my new servo gets here. "thumbsup""thumbsup"

 

[losiking1]

Yippee yahoo!!! Got some Futaba torque today!! BLS arrived and should be back in business tomorrow."thumbsup""thumbsup"

 

[losiking1]

Been a while since i updated here. Not too much new other than tires, servo and titanium axles:lmao::lmao:
Got me some Voo Doo golds, C I foams, Futaba BLS157hv. Anyhoo here's a few pics.
Voo Doos workin

 

[CrawlrKing]

Looking pretty cool... Who did your rear lowers ?