Michigan Roll Call

[takeit69]

thanks

Hey thanks for the warm welcome, I havent done alot of crawling
but looking forward to doing some and meeting everyone thanks again!8)

 

[tjontherox]

Just dropping by to introduce myself, I am from Sterling Hgts, a couple miles from Larry's perfomance. I met Bimaryterror and a comple others up there today. Was nice talking to a couple fellow crawlers. I am new to the rc crawling scene but not in the 1:1 department, which is equally addicting. I would like to make it out to a couple comps to see some different setups and meet a few people and spectate a little. I only bought min AX10 a couple months ago with a few of my buddies and we all like to bash in our yards. We a currently collecting crap to build a basher sourse in my one buddy's yard, will prolly hit it hard in the spring since fall/cold weather is setting in now. Might be kinda fun to stud some old/junk tires and make an ice course this winter though lol.

 

[hitman46mod]

Welcome aboard."thumbsup"

 

[JUSTGOINGSLOW]

I second that "thumbsup"

 

[scootertrash]

Welcome aboard."thumbsup"

X2 brotha' ~Scoot'er~

 

[binaryterror]

Ryan, I hope Tekin helps you with the ESC. I figured the Hotwire would do something, but it seems stuck.

I wonder if the internal bec didn't go poof. I did see you were running 8 cells...might be it. Another idea to try if you can:
1. Remove the red wire from the plug (Xacto will pull the tab up in the plastic and slide it out).
2. Re-insert into RX.
3. Install a 5 cell (6.0v) receiver pack from a nitro.
4. See it that fixes it., if so the internal BEC is fried...you can run an external BEC and then it would be fine.

 

[scootertrash]

Head's up-please this is very bad & sudden new's

The hospital has just called my wife and need's my father next to kin' a.s.a.p. Dammmm' i got to run brotha' to mclaren in flint at this very moment. Please' pray for me and that i don't lost my beloved daddy. Scoot'.

 

[80mac]

Good luck Scooter, I hope that everything goes o.k.

 

[JUSTGOINGSLOW]

Scooter, I hope everything is alright, best wishes.

 

[grumpy01]

hi

Hi just wanted to say hi I am from fenton just got into crawling started building a course at my house it is about 30'x40' and getting bigger every weekend if any one wants to play your more then welcome

 

[scootertrash]

Head's up'-please i lost my father 2day brotha's

I GOT THERE IN TIME TO STAND OVER HIM AND TO HEAR THAT HE WAS'NT REALLY WITH US ANYMORE'...i AM HIS NEXT TO Kin'. AND THE DOCTOR SAID THAT OL'DAD IS'NT GOING TO COME OUT OF IT AND THAT THE MACHINE IS ALL THAT IS KEEPING HIS PACERMAKER GOING. I THEN ASK MOMMA' WHAT DADDY'S WISH'ES WERE. AND SADLY SHE LOOK ME RIGHT IN MY EYE'S AND SAID THAT IF HE COULD NO LONGER HEAR HER VOICE 'OR MINE. THEN I SHOULD LET HIM GO'. I THEN ASK TO HAVE A FEW MOMENT'S ALONE WITH JUST ME AND DADDY' AND THEN AFTER AWHILE. i SAID GOOD BYE DADDY FOR I WILL MISS YOU ALLWAY'S....NOW I'M PRETTY F__K UP BROTHA' AND FALLING APART AT THIS MOMENT AS JUST NOW JUST HOME AND ABLE TO SIT ALONE IN MY LIl' ROOM. ~ In loving memory of Mr.Robert E Brown Sr who has pass away at Mclaren CCU room 617 on wedsday September 23th 2009 at 12:51 ~ As his only son was standing over him. -(( This is F--K up mannnn' - Darren,-Jesse' - twist'. I'm crying and dropping tear onto this keboarrd e i cant se that -good aat all._________________________scot'r.

 

[rev1764]

From Farmington Hills here. Just got into Crawling, made the mistake of buying a cliff climber, but that thing barely resembles it anymore. Instantaneously started modding it. Anyhow, if anyone in the area knows a good place to crawl, let me know and we can meet up. Good to see a lot of the folks in MI can still enjoy themselves in these troubled times.

 

[scootertrash]

hey'- brotha' I'm ol'Scoot'er check out all of my profile

From Farmington Hills here. Just got into Crawling, made the mistake of buying a cliff climber, but that thing barely resembles it anymore. Instantaneously started modding it. Anyhow, if anyone in the area knows a good place to crawl, let me know and we can meet up. Good to see a lot of the folks in MI can still enjoy themselves in these troubled times.

___Yo' bro'__Hit me up with a PM'. And hurry up and paid for a green star on here too'. For that open's up the magic' door to all of us other brotha's who are just next door to you'... Go over and Check out the Auburn hill's "Cop-Shop" HUGE rock'-embankment. Or maybe you could head up this way abit' and check out that new backYard racetrack that just off I-24 near Oxford and the Lapeer county line. For all the rest of Gang is fix'ing to haul up the Van and head that way soon anuff' as well'. Ask' for "Twistedone" on here,...and he'll fix' you up with all the other brotha's that are all right next door to you. Then ask for "Justgoingslow" and you could hop' aboard MiRCa' too. **For I myself and a few of my abit' younger-homeboy's,...Just might have it going on' all this winter'--> On some Custom'-made Indoor' very to set up 2.2 Comp' "fake-Rock'course's" on local indoor basketball court's and on pretty big scale as well'. keep yo' chin up brotha' and it was nice to meet you too'. -{P.s. Go to twistedcrawlersofmichigan.com - And ask for Bob Coleman} *That my big brotha' Bob in Dearborn Ht's* Sorry But,...I'm very tired & also hungry as well' and I got to soak in the tub' before I take my Med's and hit the ol'comfy bed. I've been out since 10am' and was working my Wolfhound' and we both been out tracking all day long' and he pulled to hard on my once'. And made me trip' and I pulled my ol'knee out again for abit' = "Ouchhh'-damm'-it-slow-your-ass'-down-ya' BIG Dummy" Now-see-what-you-did-But,...He just stood over me untill I pat'ed him on his forehead and let him know that we could keep on going still. And your wellcome too' ~Scoot' & Reb'~

 

[BLKXJ 96]

Hey guys just joined today, my name is Jeff. I picked up an Axial Scorpion RTC last weekend, then built a small course. Now im hooked on rc crawling, I have gone through and done some of the mods like vented wheels, and cut the tires, added weight, then built my own LCA's. Nothing serious just keeping it fun.....for now.

Any good shops that sell crawler parts in the Ann Arbor area? I like Larrys (where I got my crawler) but it's an hour and ten min drive for me one way. I would like something closer to home.

 

[twistedone]

Hey guys just joined today, my name is Jeff. I picked up an Axial Scorpion RTC last weekend, then built a small course. Now im hooked on rc crawling, I have gone through and done some of the mods like vented wheels, and cut the tires, added weight, then built my own LCA's. Nothing serious just keeping it fun.....for now.

Any good shops that sell crawler parts in the Ann Arbor area? I like Larrys (where I got my crawler) but it's an hour and ten min drive for me one way. I would like something closer to home.

Dirtburner Racing is 20 mins from ya
1-248-926-1140 tell them I sent ya
there is also a 17 ton course with 3 outdoor gardens and 1 indoor for winter crawling 20 mins the other way east from ya in Dearborn Heights

 

[rm25x]

Yep you need to hook up with the Twisted gang.

 

[BLKXJ 96]

Dirtburner Racing is 20 mins from ya
1-248-926-1140 tell them I sent ya
there is also a 17 ton course with 3 outdoor gardens and 1 indoor for winter crawling 20 mins the other way east from ya in Dearborn Heights

Thanks. Ive been to Dirtburners a few times, I went to Riders (my LHS) they dont have any crawlers and have no desire to get any....thats too bad!!!

My outdoor course seems to be gaining about two feet in length a week, im cruisin the back roads for rocks. Its getting too big for the front yard :shock:

 

[bigwalton]

Just found the whole scale crawler thing this week, was big into RC as a kid/teen but just got out of it. Built a big-ish 1:1 Scrambler that I love but I'm psyched about the whole scale crawling thing and the idea of building a replica of my Scrambler. I'm in Dexter, also found out the hard way that Riders doesn't have squat for scalers/crawlers. Where is Dirtburners?

I'd love to manage to get together to see some of these rigs in person. Starting my build in my head and I'm the kind of guy who wants to know all there is about the equipment and options.

Hope to connect with some of y'all soon.

 

[twistedone]

Just found the whole scale crawler thing this week, was big into RC as a kid/teen but just got out of it. Built a big-ish 1:1 Scrambler that I love but I'm psyched about the whole scale crawling thing and the idea of building a replica of my Scrambler. I'm in Dexter, also found out the hard way that Riders doesn't have squat for scalers/crawlers. Where is Dirtburners?

I'd love to manage to get together to see some of these rigs in person. Starting my build in my head and I'm the kind of guy who wants to know all there is about the equipment and options.

Hope to connect with some of y'all soon.

dirtburner racing
3250 old farm lane
commerece twp Mi
1-248-926-1140
he has a rtr scx 10 trail the new one and lots of scale stuff

 

[bigwalton]

Sweet, thanks. I'm going to be about the scale stuff unless I come across a screaming deal on a crawler. I can't stop watching videos of these things...