Losi Baja Rey 1/10th 4WD RTR desert truck

[TheLetterJ]

I like that off camber left turn (coming towards the camera on the far right side of the video) on the 2nd track. I'm gonna have to talk to our local track owner to see about incorporating something like that. Keeps things interesting. "thumbsup"

 

[twisted]

so i pulled one of my rear shocks apart. broke the plastic end. im running proline powerstrokes for the yeti in the rear. are any of you running limiter straps so this doesnt happen?

 

[edjo69]

so i pulled one of my rear shocks apart. broke the plastic end. im running proline powerstrokes for the yeti in the rear. are any of you running limiter straps so this doesnt happen?

Are talking about the ball end that mounts to the trailing arm? If so I use the the original Losi ball ends, just drill them out a bit larger so the PowerStroke shaft will thread in.

 

[mewalsh100]

Took some "glamour girl" shots the other night and figured I'd share. The rig is now officially dust covered after these pics and had a pretty good shakedown. I need to play with spring rates and oil weights though. Could not quite get her dialed.

 

[Landy TRX 4]

Very nice detailed truck!! Who makes those beadlock wheels?


Verzonden vanaf mijn iPhone met Tapatalk

 

[edjo69]

Top job my friend, looks absolutely perfect!!!!

 

[nedmo]

Is anyone able to measure the diameter of the stock disk brake rotor?

 

[mewalsh100]

Thanks guys - I appreciate it!

Landy TRX 4 - those are the Axial METHOD SC wheels.

nedmo - I'm running the Exotek aluminum rotors now. I think they're the same diameter though.

 

[nedmo]

Thanks guys - I appreciate it!

Landy TRX 4 - those are the Axial METHOD SC wheels.

nedmo - I'm running the Exotek aluminum rotors now. I think they're the same diameter though.

Even better, probably going to run them!!"thumbsup"

EDIT: Rey looks so amazing!!!! Well done!

 

[mewalsh100]

@nedmo - here ya go."thumbsup"

 

[CM9000]

I like that off camber left turn (coming towards the camera on the far right side of the video) on the 2nd track. I'm gonna have to talk to our local track owner to see about incorporating something like that. Keeps things interesting. "thumbsup"

My young padawan (buddy of mine) took his first baja rey "trophy" home today. He claims its my setup besides the rear diff being open, though i think the rear springs are stiffer than 1st gen. Open rear diff, locked center. I will load a video up on yt and link it here later.

Sent from my LGMP260 using Tapatalk

 

[edjo69]

I just had a quick question for you guys, what TQ range servo's are you using for the steering on this truck and please mention if you use AVC or not. Thanks allot, Ed

 

[CM9000]

I never used AVC. Actually raced mine for a couple years. I used a savox 1258 in mine. Worked well.

Sent from my LGMP260 using Tapatalk

 

[Akura2]

I just added a Bind n Drive Baja Rey to my vast collection... anyone running alternative bodies? something unique?

 

[edjo69]

A few guys have put on SCT bodies, I believe that with most bodies the wheelbase needs adjusting using Yeti trailing arms. I am putting the New Ford body on my totally rebuilt B-Rey, but it was designed for the truck. Anything can be done, pick out a body and adjust accordingly.

 

[BAJAREY2017]

I think one of the associated bodies will fit it, I think it’s called the sc8. In my opinion it doesn’t look good. The yeti raptor body will fit with some minor trimming. I put the Baja rey raptor body on mine but I don’t think it looks as good as the original rey body, I’m thinking of switching back. It’s just to big and bulky. Your options are limited, I’m getting kind of sick of all the raptor bodies on everything, I wish somebody would make something different for it. For me I like the stock original rey body or the proline yeti body.


Sent from my iPhone using Tapatalk

 

[mewalsh100]

I think one of the associated bodies will fit it, I think it’s called the sc8. In my opinion it doesn’t look good. The yeti raptor body will fit with some minor trimming. I put the Baja rey raptor body on mine but I don’t think it looks as good as the original rey body, I’m thinking of switching back. It’s just to big and bulky. Your options are limited, I’m getting kind of sick of all the raptor bodies on everything, I wish somebody would make something different for it. For me I like the stock original rey body or the proline yeti body.


Sent from my iPhone using Tapatalk

I agree - the Raptor body has been over exposed. Also, imho, Losi dicked it up for the Baja Rey by leaving that secondary open window. The proportions just look all wrong to me.

 

[edjo69]

I actually think the Losi Raptor body is pretty close to a few trucks out there, esp #7 Bryce Menzies, his truck always looks lower and wider than most other ones, in my opinion anyway. He is redesigning the layout of his truck for next year and the new body is much less bulky looking for sure. I also like the original body as well it looks super aggressive compared the Raptor. I like them both for different reasons so I will have one of each!! Getting back to the Rey after I finish up my Capra, never enough time!!!

 

[CM9000]

You can also mix and match panels...

Sent from my LGMP260 using Tapatalk

 

[mxturd]

I just got my Baja rey and the stock tires are way to soft for me, what are some good options for wheels, tires, and foams. Thanks in advance