• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

IRIE Products

Sr.Irie said:
Well then you will be happy to know I just ordered a Blue monkey tower and a GCM tower to R&D with."thumbsup" So not only will I have the kits for both very soon but I will have a Blue monkey and a GCM tower setup with my steering that I will not have a use for.
Click to expand...
That sounds great! Sorry I was not able to get you the GCM tower faster.
 
Sr.Irie said:
Well then you will be happy to know I just ordered a Blue monkey tower and a GCM tower to R&D with."thumbsup" So not only will I have the kits for both very soon but I will have a Blue monkey and a GCM tower setup with my steering that I will not have a use for.
Click to expand...

Well I will take a kit for the BlueMonkey tower :mrgreen:
 
grunt95 said:
That sounds great! Sorry I was not able to get you the GCM tower faster.
Click to expand...

Not even remotely a problem thanks for the offer.
Actually it is more of a problem I have.:oops: I am not a patient man with O.C.D. and now if I F something up it will be mine YAY.

mnickolson said:
Well I will take a kit for the BlueMonkey tower :mrgreen:
Click to expand...

I would say next week ish, I will have some.
 
Last edited:
Sr.Irie said:
I am sure I could get it to if I had a GCM tower.
If someone would be willing to send there GCM tower to me for a little R&D to get everything placed right.

The DD upgrade is in the works now and if I could find the Blue Monkey tower I have I would do that as well.
Click to expand...

There's top shelf innovation right there! Everyone wins.
I'd like to see or hear of your GCM plate developments, and we are happy to sell your steering kit as well, or make plate changes as needed to match your product. Looks great, and I'd be glad to send the zillion steering seekers to your shop for this bell crank setup! YEAH!
"thumbsup"
 
Generis said:
There's top shelf innovation right there! Everyone wins.
I'd like to see or hear of your GCM plate developments, and we are happy to sell your steering kit as well, or make plate changes as needed to match your product. Looks great, and I'd be glad to send the zillion steering seekers to your shop for this bell crank setup! YEAH!
"thumbsup"
Click to expand...

Thank you
When I get it all ready I be sure to let you know. I am going to do my best not to have to do any changes to your shock tower as it is a very good looking piece.
A zillion that is allot.
 
Oh hell yes, I'd love a drop in steering setup to mount under my GCM plate. "thumbsup":ror:"thumbsup"
 
Just looking, it appears your top plate, steering combo would already work with the derwood uprights. And the other derwood parts are for steering which is what your selling. So I don't think you have to do any R&D there.
Looks like a great product. I look forward to seeing it in future builds on the forums.
 
toyotatrucks83 said:
Just looking, it appears your top plate, steering combo would already work with the derwood uprights. And the other derwood parts are for steering which is what your selling. So I don't think you have to do any R&D there.
Looks like a great product. I look forward to seeing it in future builds on the forums.
Click to expand...

As far as I see my top plate steering would work with the upright tower.
I was speaking of my steering arms working with the DD kit to replace the DD arms that use bushings.
I have got it all worked out for my bearing arms to mount to the DD top plate but the retrofit standoffs are time consuming to produce. I do not know if it is worth it.
 
Sr.Irie said:
As far as I see my top plate steering would work with the upright tower.
I was speaking of my steering arms working with the DD kit to replace the DD arms that use bushings.
I have got it all worked out for my bearing arms to mount to the DD top plate but the retrofit standoffs are time consuming to produce. I do not know if it is worth it.
Click to expand...

I run the derwood steering. I've manage to bend my top plate at the steering arm tabs. Yours looks beefier. I'm thinking if I am going to replace bushings for bearings I might as well do the whole steering kit.
So I agree with you, it may not be worth R&D for a retrofit to the dd upper plate.
 
Pockets70 said:
But they work PERFECTLY!"thumbsup"
Click to expand...

Well they worked for you and I the problem is I have found that not all the DD top plates are the same. Even between yours and mine there were differences. If I going to make an upgrade kit it needs to work for everyone. I do not want to make something that dose not work like it should.

toyotatrucks83 said:
I run the derwood steering. I've manage to bend my top plate at the steering arm tabs. Yours looks beefier. I'm thinking if I am going to replace bushings for bearings I might as well do the whole steering kit.
So I agree with you, it may not be worth R&D for a retrofit to the dd upper plate.
Click to expand...

Pockets70 and I have also been able to bend the top plate at the steering arm tabs. Mine is much stronger there, some say overkill. :ror: As for R&Ding a retrofit kit I have it done (with the top plate I have) but the stand offs are time consuming and with the differences in top plates I have found, I would have to do the kits one at a time. So the time spent and cost I would have to charge, I think makes them not worth it also.
 
You must log in or register to reply here.

Similar threads

JatoTheRipper
Enduro Trail Truck Builder's Kit 3
Replies
14
Views
1K
JatoTheRipper
JatoTheRipper
JatoTheRipper
Jato Gets Offerings to Build the Teal Terrifier H10 Optic
5 6 7
Replies
120
Views
6K
B-MOW71
B-MOW71
pendulum_rc
Shorten wheelbase on Phoenix chassis?
Replies
3
Views
576
Gula
Gula
B
Vintage Kyosho Car Crusher - Double Dare 4WDS
Replies
1
Views
351
itstoobright
I
V
EnRoute Berg "Snow Tracer v3" build
Replies
1
Views
407
JatoTheRipper
JatoTheRipper
Back
Top