Interest in Rally?

[jason]

Look what just arrived. This thing is SUPER clean, never been ran, lot's of hop up parts. Arrived in ORIGINAL BOX! Also included an extra set of the Subaru graphics.

Here was the description from the ebay ad on all the hop ups.

Hi this is a TB01 Subaru Impeza WRC 2001 Prototype Kit that has been used. It has a lot of aluminum parts on it. It has aluminum steering , moter mount , front and rear lower arms, rear hubs, front hubs, front hub cariers , hex wheel adapters, and aluminum propeler shaft. also aluminum rear arm holder. has the big front bumper and rally block tires. has servo and dyna run motor , and Dully speed control, also has a XXl novak recever with a JR FM 82 mhz in it. comes with manual and box the wheels have a disc brake roters on the wheels. Sold as is no returns lower 48 states only please thaks

 

[RPMJ]

I like it...... That body is killer.

 

[C*H*U*D]

I will not buy another car....I will not buy another car....I will not buy another car....I will not buy another car....

 

[TURTLE]

Looks sick Jason. Want to give me that body? I will hang it on my wall with pride.:mrgreen:

On another note Dakar anyone?
I will pick up some sand for the track.
<iframe width="560" height="315" src="http://www.youtube.com/embed/YSV7sii9d-U" frameborder="0" allowfullscreen></iframe>

And just for giggles a rally track, I think it is in Japan.

 

[flapjack]

holy crap!...thats so sweet...nice track

 

[Grizzly4x4]

Holy crap Jason! That TB is frickin sweet!
Wanna sell your 4-Tec?

 

[flapjack]

made a new cover...this is a little better then the last one...we will see if it works...got some of my own blocks finally and swapped out to brushless...thnk an 8.5 is too much?..its the slowest motor i have...maybe dial it down to 3/4 or something....oh ...made a shorter stiffer steering linkage to go with the ace 1015 servo... figured i like this thing enough might as well put some nice stuff in it.....new rims look great thanx again rodney "thumbsup"

 

[DeaDShorT]

Looks sick Jason. Want to give me that body? I will hang it on my wall with pride.:mrgreen:

On another note Dakar anyone?
I will pick up some sand for the track.
<IFRAME height=315 src="http://www.youtube.com/embed/YSV7sii9d-U" frameBorder=0 width=560 allowfullscreen></IFRAME>

And just for giggles a rally track, I think it is in Japan.

I've got the perfect spot for the Mini-DAKAR about 45 minutes north-east on I-76 from my house. Jason, Grizz and CHUD have been there."thumbsup"

 

[R2j]

made a new cover...this is a little better then the last one...we will see if it works...got some of my own blocks finally and swapped out to brushless...thnk an 8.5 is too much?..its the slowest motor i have...maybe dial it down to 3/4 or something....oh ...made a shorter stiffer steering linkage to go with the ace 1015 servo... figured i like this thing enough might as well put some nice stuff in it.....new rims look great thanx again rodney "thumbsup"

8.5 is what I have in the TC"thumbsup"

 

[TURTLE]

I've got the perfect spot for the Mini-DAKAR about 45 minutes north-east on I-76 from my house. Jason, Grizz and CHUD have been there."thumbsup"

The only thing with that is if we run a Dakar class I would like to run it on the same tracks and days as the other classes.

 

[DeaDShorT]

The only thing with that is if we run a Dakar class I would like to run it on the same tracks and days as the other classes.

I could see open rally, mini trophy truck and dakar all run on a section I have in mind. I think 16th-18th scale rally would be really challenging but could be done. Good opportunity for some timed A to B chase sections with staggered starts. Could probably set up multiple loops or courses.

We might need to try a reconnaissance trip??

 

[RPMJ]

I could see open rally, mini trophy truck and dakar all run on a section I have in mind. I think 16th-18th scale rally would be really challenging but could be done. Good opportunity for some timed A to B chase sections with staggered starts. Could probably set up multiple loops or courses.

We might need to try a reconnaissance trip??

I'm in Thanks for the chance"thumbsup"

 

[TURTLE]

We might need to try a reconnaissance trip??

Definitley!

"thumbsup"

Merry Christmas everyone!

 

[DeaDShorT]

I'm in Thanks for the chance"thumbsup"

Definitley!

"thumbsup"

Merry Christmas everyone!

Just got this:
TAM58286 TB-01 Mitsubishi Lancer EVO VII Rally Drift Kit.
http://www.ebay.com/itm/330661505704?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Should be here end of next week, I'll be getting some electronics gathered and cleaning some junk out of the workshop/workbench to get it built.

Merry Christmas guys!!

 

[TURTLE]

Just got this:
TAM58286 TB-01 Mitsubishi Lancer EVO VII Rally Drift Kit.
eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices

Should be here end of next week, I'll be getting some electronics gathered and cleaning some junk out of the workshop/workbench to get it built.

Merry Christmas guys!!

Very nice Stan, same guy the Rodney bought two from, I bought two from and Jason bought one from. :ror:

I bet that guy is wondering what the hell is going on in Colorado.

You will need some rally tires, and a underbody, I also recommend a metal motor mount and another TB01 for parts, you never know when they will be non existent. If you need help finding those parts PM me. I got them all sourced.

Im glad I started a TB01 revolution.:mrgreen: You guys might get mad at me when I show up with the next rally car I have been researching.:lmao:

Have fun with it Stan if you need any pointers let me know."thumbsup"

 

[R2j]

Just got this:
TAM58286 TB-01 Mitsubishi Lancer EVO VII Rally Drift Kit.
eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices

Should be here end of next week, I'll be getting some electronics gathered and cleaning some junk out of the workshop/workbench to get it built.

Merry Christmas guys!!

Haha! I was watching that one, but forgot about it while driving to SD.

 

[DeaDShorT]

Very nice Stan, same guy the Rodney bought two from, I bought two from and Jason bought one from. :ror:

I bet that guy is wondering what the hell is going on in Colorado.

You will need some rally tires, and a underbody, I also recommend a metal motor mount and another TB01 for parts, you never know when they will be non existent. If you need help finding those parts PM me. I got them all sourced.

Im glad I started a TB01 revolution.:mrgreen: You guys might get mad at me when I show up with the next rally car I have been researching.:lmao:

Have fun with it Stan if you need any pointers let me know."thumbsup"

I really want 2 just for those reasons.

Wondering if Jason or Aaron still have their lexan vacuum forming abilities?? I could see a few of those underbodies being built for less than they want for them on ebay.
Was wondering about the motor mount...still trying to decide what to slap in there for a motor. Got the old castle sidewinder and a link, might just slap a titan or something in it to get going. Need lipo and a decent charger still, crap...I need a good 2.4 radio unless I want to drive it on the dx6:shock:

 

[DeaDShorT]

Haha! I was watching that one, but forgot about it while driving to SD.

Had a house full of family watching me watch the auction expire:ror: guess I bought my own Christmas present"thumbsup"

 

[TURTLE]

I really want 2 just for those reasons.

Wondering if Jason or Aaron still have their lexan vacuum forming abilities?? I could see a few of those underbodies being built for less than they want for them on ebay.

I got a source for (I think) 15.00 shipped for an underbody, can't get much cheaper then that.

 

[flapjack]

Well I guess I wont be making it out the lcq now..can't keep up with a pack of tb01's...anyone want a df03 for parts..im too broke to keep up.