-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Interest in Rally?
- Thread starter TURTLE
- Start date
I think if we say 1.9 wheels inside and outside bead both 1.9, with no additional trackwitdh would be fine for the wheels.
I can go either way on tires, I kinda like requiring stock uncut tires only because then EVERYONE is on level ground as far as traction. But I can also see the argument to add different tires.
I figured it would wind up here in Colorado. I wouldn't have minded picking it up, just didn't have the cash.
Haha, I wish.
I gotta get me and my team some [HILLBILIGAN] stickers made up.
<iframe width="800" height="437" src="http://www.youtube.com/embed/vNnLNf0OZrE" frameborder="0" allowfullscreen></iframe>
I can go either way on tires, I kinda like requiring stock uncut tires only because then EVERYONE is on level ground as far as traction. But I can also see the argument to add different tires.
I figured it would wind up here in Colorado. I wouldn't have minded picking it up, just didn't have the cash.
Haha, I wish.
I gotta get me and my team some [HILLBILIGAN] stickers made up.
<iframe width="800" height="437" src="http://www.youtube.com/embed/vNnLNf0OZrE" frameborder="0" allowfullscreen></iframe>
Last edited:
C*H*U*D
No idea what I'm doing
It comes with the Tamiya stock motor and Axial AE-2 esc, so I'll run them for now. I can steal a receiver from my original MRC and be running as soon as it shows up. I definitely want to run the Mercedes body though.
C*H*U*D
No idea what I'm doing
I didn't really either, but I like having my own vehicle. I never really look through the classifieds, and would have probably never seen it if you hadn't posted the link. I hate you now, but will probably be thanking you later...you can take it for a spin at the next event.
C*H*U*D
No idea what I'm doing
So what's the best Rally Sim for the PC? Not the arcade type of racing, but real driving simulator. Richard Burns Rally looks fantastic...any others?
<iframe src="http://www.youtube.com/embed/HOAmlobgckk" allowfullscreen="" frameborder="0" height="315" width="560"></iframe>
<iframe src="http://www.youtube.com/embed/HOAmlobgckk" allowfullscreen="" frameborder="0" height="315" width="560"></iframe>
This ain't over son........ :ror:
:ror: Fawkin' A cotton!!! [HILLBILLIGAN] rules!!!! :lmao:
That one looks great. I've never tried any simulators.
Holy crap! How cool is that Gary!! :shock:
flapjack
Rock Crawler
anyone want to pick up a rs4 rally?.....its going to you guys or the pawn shop...
flapjack
Rock Crawler
im only looking for bike stuff/cash/or sc10 parts...pm me so we can talk about it or you got my number jason
if you dont get it and i only get 20-30 bucks for it at the pawn shop so be it
sold to one ozint...thanx cole
if you dont get it and i only get 20-30 bucks for it at the pawn shop so be it
sold to one ozint...thanx cole
Last edited:
Yep really liked mine! I started racing touring with a RS4 Sport, then to a RS4 ProII, to a MI-1, then a XXX-S G+ for mod and a YOKOMO MR4TC SG for stock, to JRXS, then a JRXS-R and then just recently bought and then sold a FT TC-5R:roll:. Really like the TC3 since it's easy to convert to a rally car, but the XXX-S would be a good option with the sealed drivetrain. Plus parts are still pretty easy to get for both. E-Team Hobbies in Fort Collins carries a bunch of touring car stuff."thumbsup"
C*H*U*D
No idea what I'm doing
It looks some of the parts are available individually...I've Googled the part numbers from this .pdf and have been finding some...is it possible to make what can't be found?:
http://teamassociated.com/pdf/cars_and_trucks/TC3/3020.pdf
TowerHobbies.com | 3984 Associated Factory Team Rear Arms 200mm TC3 (2)
TowerHobbies.com | 3895 Associated Rear Shock Tower TC3
It looks like tower has the shock tower, the rear arms, and the inner cv's.
It wouldn't be hard to make tierods, and upper arms, but you are still missing the front lower arms.
It wouldn't be hard to make tierods, and upper arms, but you are still missing the front lower arms.
Shit, that list looks like the one to convert the 4-Tec to rally.
4-TEC Rally Conversion guide - Ultimate Traxxas
No need to go 200mm though, I kept mine at 190mm even though I have the 200mm parts.
All you need to do is get creative with shocks and possibly upper shock mounts.
All I did to mine was put the rear shocks on the front, make a front upper shock mount from aluminum angle, put some 66mm shocks on the rear, and make the chassis skid.
EDIT: The rear shocks I used were HPI #A721. But they are discontinued now.
4-TEC Rally Conversion guide - Ultimate Traxxas
No need to go 200mm though, I kept mine at 190mm even though I have the 200mm parts.
All you need to do is get creative with shocks and possibly upper shock mounts.
All I did to mine was put the rear shocks on the front, make a front upper shock mount from aluminum angle, put some 66mm shocks on the rear, and make the chassis skid.
EDIT: The rear shocks I used were HPI #A721. But they are discontinued now.
Last edited:
If you really want to make the car wider you can just use 3mm offset wheels.
0mm offset:
::HPI RACING::
3mm offset to make you almost as wide as a 200mm car:
::HPI RACING::
6mm offset to make you wider than 200mm:
::HPI RACING::
Most of HPI's wheels are available in all three offests.
::HPI RACING::
0mm offset:
::HPI RACING::
3mm offset to make you almost as wide as a 200mm car:
::HPI RACING::
6mm offset to make you wider than 200mm:
::HPI RACING::
Most of HPI's wheels are available in all three offests.
::HPI RACING::
To heck with Ford vs Chevy.
It's Team [HOONIGAN] vs Team [HILLBILIGAN] !!!!!!
:lmao:
It's Team [HOONIGAN] vs Team [HILLBILIGAN] !!!!!!
:lmao:
